Yamaha R-S300 Stereo Receiver – 50 WPC, MM Phono, Sub Out

A two-channel Yamaha receiver from the R-S series, 50 watts a side, with a proper moving-magnet phono stage, a subwoofer output and switching for two pairs of speakers.

There is a particular problem this receiver solves better than almost anything else at the price. Someone has a turntable, or is about to buy one, and wants a real system rather than a powered-speaker compromise — and every modern receiver at the money is a five-channel home theatre box with a menu system, six HDMI inputs and no phono input at all. The R-S300 is the opposite of that. Two channels, a volume knob, bass and treble, and a phono stage that works.

That phono stage is the reason to care. It is a genuine moving-magnet input rated at 87 decibels signal-to-noise, not the afterthought circuit that turns up on budget gear, and it means a turntable connects directly with no outboard preamplifier and no extra box on the shelf.

The amplifier behind it is better specified than the modest wattage suggests. Yamaha rates 50 watts per channel across the full band at 0.04 percent distortion, but the dynamic power figures tell the more useful story: 70 watts into 8 ohms, 89 into 4, and 100 into 2. That is an amplifier with current in reserve, and the damping factor of 150 reflects the same thing — it grips a woofer rather than letting it ring. It is rated for 4-ohm loads, so it is not fussy about what you connect to it.

Pure Direct is the switch worth knowing about. It takes the tone controls, the balance control and the loudness circuit out of the signal path entirely, leaving the shortest route from input to output. With it engaged the response runs from 10 hertz to 100 kilohertz within a single decibel, and signal-to-noise measures 100 decibels.

The rest is sensible rather than showy. Forty AM and FM presets. A mono subwoofer output, so a powered sub can be added later without replacing anything. Binding posts rather than spring clips, and front-panel switching between two pairs of speakers — useful if you want a second pair in another room, or simply want to compare. A headphone jack, a sleep timer, and an auto-standby that shuts the receiver down after a set number of hours. The front panel is extruded aluminum, and the chassis uses Yamaha’s ART Base construction, which braces the whole assembly against its own vibration.

It sold new for $499 in Canada in 2010 — around $740 in 2026 Canadian dollars.

Condition is Very Good, and it has been tested and confirmed working properly across all inputs and both speaker channels.

No remote control is included with this receiver. Saying so plainly because it is the question people ask, and because the answer is better than it sounds: every function lives on the front panel. Source selection, volume, bass, treble, balance, loudness and the A/B speaker switching are all there under your hand. The remote is a convenience on this model, not a requirement, and nothing about the receiver is out of reach without one.

A few relevant specifications:

A well-built modern two-channel receiver with the phono stage a turntable actually needs, at well under what it cost new.

Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.

Yamaha R-S300 stereo receiver Specifications

• Two-channel stereo receiver, 50 W + 50 W into 8 ohms, 20 Hz to 20 kHz, 0.04% THD
• Dynamic power 70 / 77 / 89 / 100 W into 8 / 6 / 4 / 2 ohms
• Total harmonic distortion 0.015% at 25 W into 8 ohms
• Frequency response 10 Hz to 100 kHz, ±1 dB, Pure Direct engaged
• Signal-to-noise ratio 100 dB, line; 87 dB, moving-magnet phono
• Damping factor 150
• Input sensitivity 3.5 mV phono, 200 mV line
• Minimum speaker impedance 4 ohms
• Five audio inputs including moving-magnet phono; two outputs
• Mono subwoofer output
• Two speaker pairs, A and B, on binding posts
• Pure Direct, continuously variable loudness, bass and treble
• FM 50 dB quieting sensitivity 3 µV; FM signal-to-noise 74 dB mono, 70 dB stereo
• Forty AM and FM presets
• Headphone jack, sleep timer, auto power standby
• Aluminum-extruded front panel, ART Base chassis
• Introduced 2010
• Dimensions: (Width x Height x Depth) 17.1 x 5.9 x 15.2 inches (435 x 151 x 387 mm)
• Weight: 19.4 lbs (8.8 kg)

⚠️ Important Information for International Buyers

This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.