Marantz WC-1 Wood Case – Fits 1200, 1250, 120 and More

$295.00

Consignment piece. We sell it on behalf of its owner, and it's covered exactly like everything else we sell: inspected and serviced as required, and backed by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. The one difference: it isn't eligible for Cue It Up layaway.

The Marantz WC-1 wood case, in good condition, that turns a bare 1200 or 120-series chassis back into a piece of furniture.

✔️ Good condition — light scratches and small nicks from age; the chips are on the underside, where they do not show
✔️ Fits the Marantz 1200, 1200B, 1120, 1150, 1250, 120, 125, 10B, 20 and 23
✔️ Ships unmounted in its own carton, wrapped and protected
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping

1 in stock

Description

The Marantz WC-1 wood case, in good condition, that turns a bare 1200 or 120-series chassis back into a piece of furniture.

What it is

Marantz sold many of its components as a bare chassis and let you buy the wood case separately, which is why so many good Marantz pieces sit on a shelf looking unfinished today. The WC-1 is the case for the full-width Marantz faceplate: the Model 1200 integrated amplifier, the 1120, 1150 and 1250, the 120 and 125 tuners, and the 10B, 20 and 23.

It is a wood-veneered sleeve over a particleboard core, the way cases of that era were built. The veneer has the warm, reddish tone and fine grain of cherry, though after fifty years we cannot say for certain which wood it is. It has a black perforated metal panel set into the top to let the heat out, a wide framed opening at the front for the faceplate, and a recess along each side of the base. The space around the chassis is deliberate: it is the cooling path for amplifiers like the 1200, which carry their heat sinks along the sides.

On the 1200 it mounts with four screws through the corners of the faceplate into the front frame. The case ships unmounted, packed on its own, and goes on in a few minutes.

Condition

Good. The veneer shows its age, with light surface scratches on the top and a few small nicks along the front edges, as the photographs show. The chips it has are on the underside, where they do not show once a component is inside. The case is structurally sound and the top panel sits flat.

Looking for the amplifier to go in it? We also have a Marantz Model 1200 integrated amplifier, listed separately.

Give a bare vintage Marantz the case it was meant to live in.

Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.

Marantz WC-1 Wood Case Details

  • Type: Marantz WC-1 wood case
  • Construction: wood veneer over a particleboard core
  • Veneer: looks like cherry (not confirmed)
  • Top: black perforated metal vent panel
  • Front: framed opening for the faceplate
  • Fits: Marantz 1200, 1200B, 1120, 1150, 1250, 120, 125, 10B, 20, 23
  • Mounting on the 1200: four faceplate corner screws
  • Dimensions: (Width x Height x Depth) 17.75 x 6.88 x 15.5 inches (451 x 175 x 394 mm), height measured without the feet
  • Weight: 7.5 lbs (3.4 kg)

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.

Additional information
Weight9.5 lbs
Dimensions19.5 × 21.75 × 10.88 in
About brand
Marantz at Radique

Marantz began in 1953 in Queens, New York, where Saul Marantz built tube preamplifiers and amplifiers, and by the 1970s it was making receivers with champagne-gold faceplates, blue-lit dials and flywheel tuning. We carry Marantz receivers, amplifiers and preamps, turntables, tuners, CD players and cassette decks. We've had more than 150 Marantz listings so far, covering nearly 100 different models. Every used Marantz here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Many Marantz components were sold without their wood case, so we also make new cherry WC-22 and WC-10 style cabinets. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our five best-selling Marantz models so far: the SR4023 stereo receiver, the vintage 2225, the SR7000 AV receiver, the SR4320 stereo receiver and the vintage 2238B.

The Marantz story, 1953 to today

Saul B. Marantz founded the company in New York in 1953. His first product, the Audio Consolette preamplifier, became the Model 1, and Marantz dates the first Consolettes to 1952–53. Marantz says the early factory was in Woodside, Queens.

The tube years. Through the late 1950s and early 1960s Marantz built a small run of tube separates in New York that collectors still chase: the Model 7 preamplifier (1958), the Model 9 power amplifier (1960) and the Model 10B tuner (1964).

Superscope and the move to Japan. In 1964 Superscope, the company that also distributed Sony tape recorders in the US, bought Marantz, and Saul Marantz resigned at the end of 1967. The Model Eighteen of 1968 was the first Marantz receiver, rated at 40 watts per channel. Under Superscope, design moved to California and, from the late 1960s, production moved to Japan through Standard Radio, which became Marantz Japan in 1975. Receivers such as the 2230 and 2270 are listed as designed in the USA and produced in Japan.

The power race. After a 1974 Federal Trade Commission rule tightened how amplifier power was rated, receiver makers competed on watts. Marantz's Model 2500 of the late 1970s was rated at 250 watts per channel and had an oscilloscope tuning display.

Philips, Denon and today. In 1980 Philips bought Superscope's stake in Marantz Japan and the brand outside the US and Canada. Marantz says its CD-63 of 1982 was one of the first CD players, and its "KI Signature" models carry the initials of Ken Ishiwata, who joined in 1978. In 2001 Marantz Japan bought the trademark back from Philips, and in 2002 it combined with Denon to form D&M Holdings. In September 2025 HARMAN, a Samsung company, completed its purchase of Sound United, the parent of Marantz and Denon.

Which Marantz is which?

Tube separates (1950s–60s): the Models 1, 7, 8B, 9 and 10B, built in New York. Rare collector pieces.

First receivers (from 1968): the Model Eighteen, followed by the Nineteen at the end of 1969.

22xx receivers (from 1972): the first set was the 2215, 2230, 2245 and 2270, with the champagne-gold faceplate, blue-lit dial and "Gyro-Touch" flywheel tuning. A higher number generally means more power: the 2230 is rated at 30 watts per channel, the 2270 at 70. Later "B" versions such as the 2220B and 2285B followed.

Big late-1970s receivers: the 2325 (125 watts per channel), the 2500 flagship and four-channel "Quad" receivers.

1000-series integrated amplifiers: for example the 1060 (30 watts per channel, from 1971), the 1070 and the 1150 (75 watts per channel). The slim 1030, 1040, 1060 and 1070 share their case size with tuners such as the 104, 105 and 112.

Tuners: from the tube Model 10B to solid-state models such as the 2130, with its oscilloscope display.

Wood cases: Marantz sold its wood cases separately: the WC-22 for the 22xx receivers, the WC-10 for the slim 1000-series amplifiers and 100-series tuners, and the WC-1 for larger models such as the 1200. That is why so many turn up bare. A customer who sold Marantz in Ontario in the 1970s told us the cases his shop ordered were built here in Canada, by Westinghouse. Our own cherry WC-22 and WC-10 style cabinets are made in Canada too.

CD players: from the CD-63 of 1982 to the KI Signature versions.

Buying used Marantz: what to check

Dial and meter lamps. Burnt-out bulbs are common on 1970s receivers and are often replaced, sometimes with LEDs. Ask which, if the look of the dial matters to you.

The dial itself. The diffuser sheet behind the dial ages and can dull the glow. Check that the Gyro-Touch pointer moves smoothly and tracks the stations; dial cords are a common replacement part.

Controls and switches. Crackle when you turn a control or work a switch usually means dirt. Try every input, and walk away from a unit that drops a channel.

Capacitors and bias. Electrolytic capacitors in 1970s gear are often past their best, and full restorations replace them. Restorers also set the bias and DC offset.

Cosmetics. Pitting on the faceplate points to damp storage, and dents or water stains to rough handling.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.