Nakamichi RE-2 Stereo Receiver – 55 WPC
$345.00
Fifty-five watts a channel into 8 ohms at 0.1% distortion, from a linear supply and a discrete output stage. Moving-magnet phono, variable loudness, A and B speaker outputs, and pre-out/main-in if you ever want to split it. The motorised volume works from the original Nakamichi remote, which comes with it. Cleaned, DeOxIT serviced and fully tested.
1 in stock
Nakamichi RE-2 Stereo Receiver – 55 WPC, Serviced and Tested, with Original Remote
This Nakamichi RE-2 stereo receiver is a fantastic example of late 20th-century Japanese engineering—elegant, powerful, and built to last. Delivering a clean 55 watts per channel into 8 ohms, it combines refined sound quality with a wide range of useful features. The unit has been thoroughly tested, cleaned, and DeOxIT serviced, ensuring smooth, noise-free operation. It comes with its original Nakamichi system remote and a soft-copy PDF manual for reference.
The RE-2 represents Nakamichi’s traditional attention to sonic integrity, offering precise control, low distortion, and a warm, balanced tonal character. Inside, a robust linear power supply and high-current discrete transistors provide stable power delivery and dynamic headroom, allowing this receiver to drive even quality bookshelf and moderate floor-standing speakers with ease. Its phono input (moving magnet) and full complement of line-level inputs make it ideal for turntables, CD players, and streamers alike.
A motorized volume control allows remote adjustment without degrading sound quality, while variable loudness and high-speed protection circuits enhance real-world usability. Dual speaker outputs (A/B) accommodate multiple listening zones, and pre-out/main-in connections support integration with external amplifiers or signal processors.
Key Features:
55W per channel into 8Ω (20–20,000Hz, 0.1% THD)
Discrete high-current output stage for dynamic control
Moving-magnet phono input for turntables
Tone controls: Bass ±10dB (20Hz), Treble ±10dB (20kHz)
Variable loudness for balanced low-level listening
Dual speaker outputs (A/B) and pre-out/main-in jacks
Motorized volume with remote control functionality
Supplied with original Nakamichi remote and PDF manual
Cleaned, DeOxIT serviced, and fully tested
Specifications:
Tuning Range: FM / MW (AM)
Power Output: 55W + 55W (8Ω), 0.1% THD
Frequency Response: 20Hz–20kHz (±0.5dB)
Input Sensitivity: 2.5mV (MM phono), 150mV (line)
Signal-to-Noise Ratio: 78dB (phono), 100dB (line)
Output: 150mV (line), 1V (pre-out)
Speaker Impedance: 4Ω minimum
Dimensions: 430 × 100 × 370 mm (17″ × 3.9″ × 14.6″)
Weight: 9 kg (19.8 lbs)
Accessories: Original remote control
This RE-2 is a beautiful example of Japanese craftsmanship: refined build quality, smooth tactile controls, and a musical, transparent presentation. Perfect for audiophiles who value understated looks, quiet operation, and exceptional sonic balance.
Asking just $345 for this high-quality Nakamichi receiver.
Includes Radique’s “Bumper to Bumper” warranty and Perpetual Trade-Back Policy—buy with total confidence.
| Weight | 22 lbs |
|---|---|
| Dimensions | 18.6 × 21 × 8 in |
Related Products
Denon DRA-835R Vintage Stereo Receiver – 100 WPC, Made in Japan
The second-from-the-top model in Denon's early-nineties stereo receiver range, made in Japan and in very good condition, with 100 watts per channel, a phono stage, motorized volume and its original remote.
✔️ Very good condition — free of significant marks
✔️ 100 WPC, MM phono and motorized volume — made in Japan
✔️ Original Denon remote included
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Pioneer VSX-9900S Stereo Receiver – 125 WPC, Phono, 110–240V
A big, heavy early-nineties Pioneer receiver, made in Japan, with 125 watts per channel and selectable mains voltage from 110 to 240 volts, so it runs on household power almost anywhere in the world. It comes with a phono stage for your turntable and its original remote, through our Level 1 service and in good condition.
✔️ Good condition, with the original Pioneer remote
✔️ 125 watts per channel, MM phono and selectable 110–240 V mains
✔️ Radique Level 1 service, bench-tested twice before listing
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Luxman R-117 Vintage Stereo Receiver – 160 WPC, MM & MC Phono
Aurex SA-5000 Vintage Stereo Receiver – 50 WPC, Toshiba, Japan
JVC RX-307 Stereo Receiver – 80 WPC, Original Remote & Manual
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Marantz 2245 Vintage Stereo Receiver – 45 WPC, Level 1 Serviced
A Marantz 2245 from the golden age of the receiver, serviced on our bench and wearing its original Marantz case.
✔️ Condition: Very Good — original vented woodgrain case, sound
✔️ Level 1 service on our own bench, with post-service testing
✔️ 45 WPC · MM phono stage · tape loop · pre-out / main-in · two speaker pairs
✔️ Made in Japan — confirmed on the rear rating plate
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Ottawa Valley cherry cabinet available to order
Onkyo TX-906 Stereo Receiver – 80 WPC, Dolby Pro Logic
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
✔️ Good condition — works as it should; the black cabinet and faceplate present well
✔️ Through our Level 1 service — cleaned, deoxidized, checked and thoroughly tested on our bench
✔️ Phono input for your turntable, plus CD and two tape inputs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
