Paradigm Monitor 7 v3, 3-Driver Floorstanders Made in Canada
$545.00
Out of stock
Email when stock available
Attractive, slim towers with wonderful sound from legendary Canadian speaker company Paradigm. These Monitor 7 v3’s were still built in Canada, and they sound very very good.
They boast dual pairs of high quality 5-Way bindings, suitable for Bi-Wiring / Bi-Amping, and are finished in Black Ash.
Design:
3-driver, 2-1/2 way bass reflex, quasi- 3rd-order resistive port, floorstanding / tower
Crossover:
3rd-order electro – acoustic at 2.0kHz 2nd order electro – acoustic at 400Hz (lower bass driver)
Frequency Response On-Axis: ±2dB from 47 Hz – 20 kHz
Frequency Response 30° Off-Axis: ±2dB from 47 Hz – 18 kHz
High Frequency Driver: 25-mm (1 in) PTD™ dome, Mid/Bass Frequency Driver: 165-mm (6.5 in) ICP™ cone, die-cast chassis, Low Frequency Driver: 165-mm (6.5 in) carbon-infused cone, die-cast chassis
Low Frequency Extension: 33 Hz (DIN)
Sensitivity Room / Anechoic: 93 dB / 90 dB
Suitable Amplifier Power Range: 15 – 180 watts, Impedance: Compatible with 8 ohms
Dimensions HxWxD: 40″ × 7.625″ × 15.375″, (98cm × 20cm × 37cm), Weight: 76 lbs. (34.5 kg)
These Monitor 7 v3’s are in very good condition (Cabinets,and Drivers) and are a very desirable model.
Retailed new for over $1K with tax, asking just $545 for these great-sounding Paradigm towers, Made in Canada.
| Weight | 80 lbs |
|---|---|
| Dimensions | 19.4 × 22 × 44 in |
Related Products
- >
- — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery
>Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
