Onkyo 100 WPC Stereo Receiver w/ Phono, Sub, 2 Zone TX-8555
$245.00
Out of stock
Email when stock available
Onkyo 100 WPC Stereo Receiver with Phono, Sub-out, Dual Zone and original remote.
Rare combination of features from the recent model Onkyo Stereo Receiver. Very nice to have a dedicated subwoofer output and Dual Zone option for music applications, without the complication of un-needed home theater features or surround sound.
For great stereo sound at a remarkably down-to-earth price, check out this versatile receiver from Onkyo. The TX-8555 boasts 100 watts per channel of clean, high-current power to deliver a powerful sonic punch that’s sure to satisfy.
Rock-solid Onkyo construction The ‘8555 owes its impressive sound quality to Onkyo’s renowned low-impedance amplifier design. Its oversized, shielded transformer provides maximum power capacity and stability with minimum hum. An efficient heavy-duty extruded aluminum heat sink ensures cooler operation and longer life from your receiver. Plus the rigid, reinforced chassis and aluminum front panel fight performance-robbing vibration. These details all add up to breathtaking performance, and the ability to drive virtually any speaker system with ease.
Hook-up flexibility and convenience The ‘8555 provides plenty of inputs for your audio gear: Connect up to three audio source components (including a turntable). Two-room/two-source capability means you can enjoy one audio source in your main room while a housemate listens to another source in a different room. (You’ll need amplifiers or powered speakers for the second room.) Two sets of main speaker outputs let you connect an additional pair of speakers.
Product highlights:
100 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.08% THD
4-ohm capability allows use with a wide range of speakers
dual-room/dual-source audio (line-level stereo audio output for 2nd room)
3 audio inputs (including phono), and 4 A/V inputs (composite video)
line-level subwoofer output
three front-panel display brightness settings (dim, dark, normal)
direct access tuning
40 AM/FM presets
rotary bass and treble controls
Pure Audio/Direct mode for cleaner sound
remote control
headphone jack
front-panel switching for two pairs of main speakers
anti-resonant aluminum front panel
high-current, low-impedance amplifier design
oversized power transformer, filter capacitors, and heat sink
sleep timer
Dimensions: 17-1/8″W x 5-7/8″H x 13-3/4″D, weight: 19 lbs.
Includes Onkyo remote, and soft copy of manual in PDF.
MSRP of $299 USD ~ $446 CND with HST. Asking just $245 for this recent model, nicely well-equipped, powerful Onkyo Stereo Receiver.
| Weight | 21 lbs |
|---|---|
| Dimensions | 22 × 10 × 18 in |
Related Products
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
