NAD 20 WPC AM/FM Stereo Receiver, Made in Japan 7120
$295.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Give your next receiver Bluetooth. RA-Twin II, $39.00 →
Other stereo receivers we have in stock now
3 in stock · $295.00–$345.00 · all ship
NAD 7225PE AM/FM Stereo Receiver — 25 WPC, Power Envelope$345.00Ships
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC$295.00Ships
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet$295.00Ships
Give your next receiver Bluetooth.
The RA-Twin II adds Bluetooth streaming to any vintage receiver or amp with a spare input. Phone to stereo in about a minute, and nothing on the receiver is modified.
RA-Twin II, $39.00 →NAD 7120 Stereo Receiver: Classic Japanese-Made Audio Excellence
The NAD 7120 is a highly regarded vintage stereo receiver manufactured in Japan from 1982 to 19842. This model exemplifies NAD’s commitment to superior sound quality and robust build, making it a sought-after piece for audio enthusiasts.
Known for its exceptional audio performance, the NAD 7120 delivers crystal-clear highs and impressive low-end response. Despite its modest power rating of 20 watts per channel into 8 ohms, this receiver boasts NAD’s signature “Power Envelope” technology, providing additional headroom for dynamic peaks. In fact, it can achieve a clipping power of 28W at 8 ohms and 37W at 4 ohms, with an additional 4 dB of headroom.
The NAD 7120 features both FM and AM tuning ranges, ensuring versatile radio reception. Its minimalist design, typical of NAD products, focuses on functionality and audio quality rather than unnecessary frills. The receiver’s ability to drive speakers with impedances as low as 2 ohms demonstrates its flexibility and power handling capabilities.
The sound is as good as it gets for 20 WPC (but NAD always underrated its equipment) and It confidently drives 4 Ohm speakers and can handle temporary loads as low as 2 Ohms.
Front panel: Power – Phones – Bass – Treble – Balance – Tape Monitor; – Phono – AM – FM -AUX – Mono/Stereo – Loudness – Volume – Tuning; 5-Station memory with Enter and Search functions.
Rear panel: RCA jacks for all inputs/outputs – Soft Clipping On/Off – 4/8 Ohms Impedance switch – Speakers connectors – 1 extra power outlet.
Key Features: • High-quality audio output with excellent clarity and bass response • NAD’s “Power Envelope” technology for enhanced dynamic range • Versatile FM and MW tuning • Robust build quality, ensuring longevity • Ability to drive low impedance speakers
Specifications: • Power output: 20 watts per channel into 8Ω (stereo) • Minimum speaker load impedance: 2Ω • Tuning range: FM, AM • Year of manufacture: 1982-1984 • Made in: Japan
Dimensions: (Width x Height x Depth) 420 x 110 x 340 mm (16.5 x 4.3 x 13.4 inches), Weight: 7.2 kg (15.9 lbs)
The NAD 7120 represents a piece of audio history, offering exceptional sound quality and reliability in a compact package. Its enduring popularity among audiophiles is a testament to its performance and build quality. Whether you’re a vintage audio collector or simply seeking a high-quality stereo receiver, the NAD 7120 is an excellent choice that continues to impress decades after its initial release.
Includes soft copy of original manual in PDF.
Asking just $295 for this great sounding vintage NAD Stereo Receiver, Made in Japan.
| Weight | 18 lbs |
|---|---|
| Dimensions | 20.5 × 8.3 × 17.4 in |
Related Products
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
