




Paradigm 3 Driver Towers w/ Dual 8″ Woofers 9se-Mk III
$495.00
Out of stock
Email when stock available
Beefy Paradigm towers with twin 8″ woofers, great power handling and plenty of bass.
The common problem faced by 2-way speaker systems is the compromise of sacrificing high efficiency for deep bass. The 9se MkIII solves this problem. Its twin 8″ bass/midrange driver configuration simultaneously provides high sensitivity, deep power full bass, high power handling and a dramatic reduction in distortion, especially at high sound pressure levels.
PARADIGM could not accept the “high-efficiency for deep bass” sacrifice in the design of a larger 2-way model. The 9se MkIII is the culmination of this attitude, … a high-performance 2-way design capable of out-performing systems costing several times as much.
Design: 3-driver, 2-way bass reflex, Quasi-3rd order resistive port; floorstanding. Finished in Black Ash, Boasting Dual Pairs of 5-Way bindings suitable for bi-wiring / bi-amping.
Drivers: High Frequency: 25mm (1 in) TTD™ treated textile dome with aluminum former, ferro-fluid cooled and damped. Mid/Bass Frequency: Two 210mm (8 in) with diecast chassis, polypropylene cones and Apical™ formers.
Crossover: 3rd order electro – acoustic at 2.0kHz
Frequency Response On-Axis: ±2dB from 45 Hz – 20kHz, 30° Off-Axis: ±2dB from 45 Hz – 15 kHz, Low Frequency Extension: 32 Hz (DIN)
Sensitivity Room / Anechoic: 93 dB / 90 dB
Suitable Amplifier Power Range: 15 – 200 watts, Impedance: Compatible with 8 ohms
Dimensions HxWxD: 37″ × 10.5″ × 14.75″, (94.0cm × 26.7cm × 37.5cm), Weight: 50 lbs each
Asking just $495 for these great-sounding Paradigm floor-standers in very good condition.
| Weight | 110 lbs |
|---|---|
| Dimensions | 18.75 × 27 × 110 in |
Related Products
- >
- — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery
>Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.









