



Polk RT600i Tower Speakers, Great Sounding, Solidly Built
$245.00
Out of stock
Email when stock available
Great Sounding, Solidly Built Polk RT600i Tower Speakers – Tested & Working Perfectly, Good Cosmetic Condition
Experience exceptional sound quality and elegant design with this pair of Polk RT600i tower speakers—tested thoroughly and working perfectly in every respect, with good cosmetic condition that reflects careful ownership. The RT600i represents Polk’s acclaimed RT series engineering, delivering audiophile-level performance in a sleek, space-saving floorstanding design that’s perfect for both music and home theater applications.
Each RT600i features Polk’s proprietary Dynamic Balance technology with a 1″ tri-laminate dome tweeter and 6.5″ blue composite woofer in a sophisticated 2-way bass reflex design. The unique downward-firing Power Port system eliminates port noise while delivering surprisingly deep, controlled bass down to 45Hz—remarkable performance from a single 6.5″ driver. The Anti-Diffraction Bezel minimizes cabinet edge reflections for open, spacious imaging, while Acoustic Resonance Control (ARC) suppresses internal resonances for clear, natural midrange reproduction.
Built with premium finishes and solid construction, these speakers measure just 38⅜” × 8″ × 10½” (97.5 × 20.3 × 26.7cm), occupying minimal floor space while delivering room-filling sound. The integrated pedestal base provides excellent stability with adjustable rubber feet for hard floors or hidden carpet spikes for carpeted surfaces. Gold-plated 5-way binding posts ensure secure, high-quality connections with any amplifier.
Key Features:
2-way Dynamic Balance design with downward-firing Power Port technology
1″ tri-laminate dome tweeter with vapor-deposited micro-layers for detailed highs
6.5″ blue composite woofer with rubber surround for deep, accurate bass
Anti-Diffraction Bezel for enhanced three-dimensional imaging
Acoustic Resonance Control (ARC) port for clear midrange reproduction
Magnetic shielding allows placement near televisions and electronics
Premium wood veneer finish with removable cloth grilles
Specifications:
Frequency Response: 45Hz–25kHz (-3dB), 30Hz–26kHz (overall)
Sensitivity: 90dB (1W/1m)
Power Handling: 20–150 watts recommended
Impedance: 8 ohms
Crossover: 2.5kHz, 12dB/octave
Dimensions: 38⅜” × 8″ × 10½” (97.5 × 20.3 × 26.7cm)
Weight: Approximately 40 lbs each
These RT600i speakers are praised by reviewers for their “tonally-balanced, clean, neutral sound” with “surprisingly deep bass” and “excellent soundstage.” Perfect for discerning listeners seeking high-quality sound in an attractive, room-friendly package.
We normally list this model for $295, however one tweeter is slightly wrinkled (still sounds great, and not noticeable with grills in place), so we have discounted them to $245; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 85 lbs |
|---|---|
| Dimensions | 14.5 × 22 × 42.4 in |
Related Products
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
The flagship of Energy’s Connoisseur range, built in Toronto by a company whose voicing grew out of the National Research Council’s listening work in Ottawa. Two 8-inch aluminium-polypropylene woofers and a cloth-suspended aluminium dome, crossed at 1,800 Hz and reaching 28 Hz — genuinely full-range, so most rooms will not want a subwoofer under them. At 93 dB it runs happily on 30 watts. High-gloss black, made in Canada, 57 lb each. Very Good condition. Pair — pickup in Kanata, or we deliver.









