Single Heavy B&W Satellite Speaker w/ Shelf Stand M-1
$125.00
One speaker, with the adjustable table stand included. A 25 mm metal dome over a 100 mm woven glass fibre cone, crossed at 4 kHz, 85 dB into a nominal 8 ohms that drops to 4. It works perfectly, but the front trim is missing and the tweeter has been creased. The sound is still extremely good, and the price is down from $195 to $125 because of the cosmetics.
1 in stock
Single (1) Heavy B&W Satellite Speaker w/ Shelf Stand Price reduced due to cosmetics. (Please see below)
Where versatility and discretion are concerned, the M-1 has them in abundance. It’s equally suited to multi-channel or stereo sound, is an outstanding listen with or without a subwoofer, and comes complete with high quality adjustable table stand.
Drive units: 1x ø25mm (1in) metal dome high-frequency 1x ø100mm (4in) woven glass fibre cone bass/midrange
Sensitivity: 85dB spl (2.83V, 1m)
Nominal impedance: 8Ω (minimum 4.0Ω)
Crossover frequency: 4kHz
Recommended amplifier power: 20W – 100W into 8Ω on unclipped programme
Frequency range: -6 dB at 55Hz and 50kHz
Frequency response: 64Hz – 23kHz ±3dB on reference axis
Harmonic distortion: 2nd and 3rd harmonics (90dB, 1m) <1% 120Hz – 30kHz
Dimensions (Mounted on integrated table stand): Height: 248mm (9.8in), Width: 114mm (4.5in), Depth: 162mm (6.4in), Weight: 2.3kg (5lb)
This model retailed new for $399 plus HST for the single speaker. This speaker is working perfectly, but is missing the front trim and unfortunately the tweeter has been creased. Sound is still extremely good, but we have reduced this speaker from our regular list price of $195 down to $125 due to its more cosmetics.
If you’re looking for a single, high quality (and very solidly built) satellite speaker, where sound and angle adjustments are paramount, and you aren’t as concerned with appearance, then this could be a good option for you. Can also be used as a very compact but high quality center speaker.
| Weight | 7 lbs |
|---|---|
| Dimensions | 13.8 × 8.5 × 10.4 in |
Related Products
Single Paradigm 4-Driver, 2-Way Dipole Speaker ADP-170 v4
One speaker, not a pair. Four drivers on two angled baffles — two 19 mm CMC domes and two 140 mm MPC cones on die-cast chassis — running out of phase above the 2 kHz crossover and in phase below it. That is what Paradigm meant by adapted dipole: a diffuse surround field without giving up the bass. The upper piece of vinyl cladding has been removed, so the top wants painting or a spot out of sight.
Single Polk Bookshelf Speaker RT-15
One speaker, not a pair — a 5.25-inch Dynamic Balance driver under a 3/4-inch Dynamic Balance silk dome. 63 Hz to 24 kHz overall, 89 dB into 8 ohms, on 20 to 100 watts a channel. Five-way binding posts, integrated keyhole slots for wall mounting, and it accepts an Omnimount articulating bracket. Great condition.
Single Paradigm Satellite Speaker Cinema 70 v3
A two-way sealed box — acoustic suspension, which is uncommon now — holding a 3.5-inch polypropylene woofer and a 0.63-inch polymer composite dome in a mineral-filled polymer shell. Sealed makes it far less fussy about placement than a ported satellite: jammed in a cabinet or hard against a wall, it still behaves. 15 to 80 watts at 8 ohms. Single speaker; wall mount available for $10.
Canadian Made Energy Compact Speaker Pro Series .5 SINGLE ONLY
One speaker, not a pair. A vented two-way built in Canada: a half-inch flared dome tweeter over a 5.25-inch injection-moulded woofer, crossed at 3 kHz, 60 Hz to 20 kHz within 3 dB, 86.5 dB anechoic into 8 ohms and rated to 80 watts. Rear-ported, on 5-way binding posts that take banana plugs, and 10.5 inches tall.
Single Great Sounding Budget Speaker from Polk Audio R150
A 5.25-inch Dynamic Balance woofer on a butyl surround under a 3/4-inch neodymium tweeter, ported, 65 Hz to 20 kHz at 89 dB into 8 ohms and rated to 100 watts. Video-shielded, and on 5-way binding posts rather than spring clips. This is a single speaker; a pair of the same model is listed separately.
B&W SCMs speaker (single) with Heavy Duty Wall-Mount
