Single Polk Bookshelf Speaker RT-15
$55.00
One speaker, not a pair — a 5.25-inch Dynamic Balance driver under a 3/4-inch Dynamic Balance silk dome. 63 Hz to 24 kHz overall, 89 dB into 8 ohms, on 20 to 100 watts a channel. Five-way binding posts, integrated keyhole slots for wall mounting, and it accepts an Omnimount articulating bracket. Great condition.
1 in stock
Great sounding single Bookshelf speaker from Polk Audio.
Driver Complement:
Mid/Woofer 1 x 5-1/4″ Diameter (13.34cm) Dynamic Balance® driver
Tweeter 1 x 3/4″ Diameter (1.91cm) Dynamic Balance® silk dome tweeter
Overall Frequency Response: 63Hz – 24kHz,
Lower -3dB Limit: 55 Hz
Upper -3dB Limit: 20 kHz
Nominal Impedance: 8 ohms
Recommended Amplifier Power: 20 – 100 w/channel
Efficiency: 89 dB
Inputs: 5-way binding posts
Dimensions: Cabinet Size: 11-1/8″ H x 6-5/8″ W x 8-1/2″ D, (28.26cm H x 16.83cm W x 21.59cm D)
Mounting Options: Wall mounts with integrated key-hole slots. Accepts Omnimount fully articulating bracket
Asking just $55 for this competent little bookshelf speaker from Polk Audio in great condition
| Weight | 10 lbs |
|---|---|
| Dimensions | 12.5 × 10.6 × 15.1 in |
- Hard-to-beat pricing
- Free shipping across Canada
- Manufacturer's warranty
- Get a quote on new Polk
Polk Audio began in Baltimore in 1972, founded by Matthew Polk, George Klopfer and Sandy Gross. Its SDA speakers of the 1980s used a cable between the left and right speakers to widen the stereo image. We carry Polk towers, bookshelf speakers, centre channels and subwoofers. We've had more than 180 Polk listings so far, covering more than 80 different models. Every used Polk here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Looking for new Polk? We also quote new Polk Audio direct from the Canadian distributor, with free shipping within Canada: request a quote below. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
Our five best-selling Polk models so far: the RTi10 towers, the PSW10 and PSW125 subwoofers, the RTi4 bookshelf speakers and the CSi3 centre.
The Polk story, 1972 to today
Matthew Polk, George Klopfer and Sandy Gross, graduates of Johns Hopkins, founded Polk Audio in Baltimore, Maryland, in 1972. The Monitor 7 of 1974 was their first model to succeed, and the Monitor 10 followed in 1976.
SDA. In 1984 Polk introduced SDA (Stereo Dimensional Array). A cable between the left and right speakers lets each one cancel the sound that crosses over to the wrong ear, for a wider stereo image.
Growth. Polk went public in 1986 and moved to new premises in Baltimore. It began moving manufacturing to Tijuana, Mexico, in 1988, and by 2012 Stereophile reported that Polk designed in the US and built in China.
New owners. Directed Electronics agreed to buy Polk in 2006. Polk later became part of Sound United, Masimo bought Sound United in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 2018 Legend series brought SDA back.
Which Polk is which?
Monitor (1970s to early 1990s): the Monitor 4, 5, 7, 10 and 12, with A, B and C revisions.
SDA (1984 to about 1991): the SDA-1 and SDA-2 families, CRS, SRS and the later "TL" models.
RTA (1979 to 1992): towers such as the RTA 11t, with two woofers and two passive radiators.
RT and RTi (2001 onward): Polk's lower-priced lines. Our best-selling RTi10 towers and RTi4 bookshelf speakers come from here.
CSi centres and PSW subwoofers: the CSi3 centre and the PSW10 and PSW125 subwoofers are among the Polks we sell most.
LSi (about 2001 to 2010) and LSiM (2011): Polk's flagship lines of that decade, followed by Signature (2016), Legend (2018) and Reserve (2021).
Buying used Polk: what to check
SDA cable. SDA speakers need the interconnect cable between them for the SDA effect, and early SDA models need a common-ground amplifier. Make sure the cable comes with the pair.
Tweeters. Owners report that some SL3000 tweeters on the 1989 to 1991 SDA TL models leaked their ferrofluid and failed, and that Monitor-series pairs may carry mismatched factory or replacement tweeters. Check that every tweeter plays.
Surrounds. Some early Polks used foam surrounds, which rot with age; later models such as the RTA 11t and LSiM use rubber. Press gently on each woofer surround.
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
You may also like…
IsoAcoustics ISO-200 Isolation Stands (Pair)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A pair of isolation stands for large speakers and studio monitors
- ✔️ Rated to 75 lb (34 kg) short or 60 lb (27 kg) tall
- ✔️ Short 3.75 in (95 mm) or tall 8.5 in (215 mm), up to 6.5° of tilt
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
IsoAcoustics ISO-155 Isolation Stands (Pair)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A pair of isolation stands for medium speakers and studio monitors
- ✔️ Rated to 40 lb (18 kg) short or 35 lb (16 kg) tall
- ✔️ Short 3 in (76 mm) or tall 8.25 in (210 mm), up to 6.5° of tilt
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
IsoAcoustics ISO-130 Isolation Stands (Pair)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A pair of isolation stands for small speakers and studio monitors, rated to 20 lb (9 kg)
- ✔️ Short 2.8 in (71 mm) or tall 8.25 in (210 mm), up to 6.5° of tilt
- ✔️ Top plate 5.1 × 6 in (130 × 152 mm)
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
Related Products
Single Paradigm 4-Driver, 2-Way Dipole Speaker ADP-170 v4
One speaker, not a pair. Four drivers on two angled baffles — two 19 mm CMC domes and two 140 mm MPC cones on die-cast chassis — running out of phase above the 2 kHz crossover and in phase below it. That is what Paradigm meant by adapted dipole: a diffuse surround field without giving up the bass. The upper piece of vinyl cladding has been removed, so the top wants painting or a spot out of sight.
Single Paradigm Satellite Speaker Cinema 70 v3
A two-way sealed box — acoustic suspension, which is uncommon now — holding a 3.5-inch polypropylene woofer and a 0.63-inch polymer composite dome in a mineral-filled polymer shell. Sealed makes it far less fussy about placement than a ported satellite: jammed in a cabinet or hard against a wall, it still behaves. 15 to 80 watts at 8 ohms. Single speaker; wall mount available for $10.
Canadian Made Energy Compact Speaker Pro Series .5 SINGLE ONLY
One speaker, not a pair. A vented two-way built in Canada: a half-inch flared dome tweeter over a 5.25-inch injection-moulded woofer, crossed at 3 kHz, 60 Hz to 20 kHz within 3 dB, 86.5 dB anechoic into 8 ohms and rated to 80 watts. Rear-ported, on 5-way binding posts that take banana plugs, and 10.5 inches tall.
Single Great Sounding Budget Speaker from Polk Audio R150
A 5.25-inch Dynamic Balance woofer on a butyl surround under a 3/4-inch neodymium tweeter, ported, 65 Hz to 20 kHz at 89 dB into 8 ohms and rated to 100 watts. Video-shielded, and on 5-way binding posts rather than spring clips. This is a single speaker; a pair of the same model is listed separately.
SoundSphere 2212-2 Omnidirectional Speaker – 400 W, Made in USA
A single SoundSphere 2212-2, the big two-reflector model, made in the USA: two 12-inch woofers, six tweeters and 400 watts, sending sound through 360 degrees.
✔️ Tested on our bench, both woofers and all six tweeters
✔️ Good condition, wear from use
✔️ Two reflectors, 400 W RMS, 4 ohms, 1/4-inch input
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Curbside delivery, local collection or freight within Canada
