Sony Slim Wall Mount Speakers **3 Ohms** SS-TS11
$75.00
Three ohms nominal, which is the first thing to check: a 3-ohm-rated receiver from Sony, LG or Samsung will drive them, and so will an 8-ohm amplifier switchable to 4 ohms, but a fixed 8- or 6-ohm amp will not. Two-way bass reflex — dual 2.6-inch cones and a 2-inch cone tweeter — magnetically shielded, with keyhole mounts on the back. Thirty-two and a half inches tall, three deep.
1 in stock
Sony SS-TS74 Front Speakers: Sleek and Slim Home Theater Companions
**Please note, these are 3 Ohm speakers. If you have a 3 Ohm rated amplifier from Samsung, LG, Sony etc, you can drive them no problem. If you have a more traditional 8 Ohm amplifier with switchable impedance down to 4 Ohms, you are in luck as well (running in 4 Ohm mode). However for amps with fixed impedance at 8 Ohms or 6 Ohms, these would not be a good/safe option for you.
Designed in Japan, the Sony SS-TS74 front speakers are an integral part of Sony’s BRAVIA Theater System, offering competent audio performance in a stylish package. These two-way, bass-reflex speakers deliver front left and right channel sound for your home theater setup.
Key features of the Sony SS-TS74 front speakers include:
Three-driver, two-way design with dual 2.6-inch mid-bass drivers and a single 2-inch tweeter
Magnetically shielded for placement near TVs without interference
Slim, tall profile for elegant integration into your living space.
Integrated Key-hole mounts for easy wall-mounting.
Part of Sony’s comprehensive home theater system
Specifications:
Speaker system: Two-way, Bass reflex
Impedance: 3 ohms
Woofer: 65 mm (2.6 inch) diameter, cone type × 2
Tweeter: 50 mm (2 inch) diameter, cone type
Magnetic shielding: Yes
Dimensions: (Width x Height x Depth) 112 x 828 x 76 mm (4.4 x 32.6 x 3 inches) Weight: 2.3 kg (5.1 lbs) each
Asking just $75 for these sleek, Japanese-engineered Sony SS-TS74 front wall-mount speakers.
| Weight | 13 lbs |
|---|---|
| Dimensions | 8.4 × 12 × 36.6 in |
Related Products
Insignia NS-SP211 2-Way Satellite Speakers, Shielded
A 3-inch woofer and a half-inch PEI dome in a sealed cabinet, 150 Hz to 20 kHz, 8 ohms, 80 watts peak. Keyhole slots are moulded into the back so they hang on a screw in any orientation without a bracket, and a detachable rubber base is included for shelf use. Magnetically shielded. Good cosmetic condition, tested.
Paradigm Cinema 100 CT Satellites speakers, Gloss Black
A sealed two-way in a sculpted mineral-filled polymer cabinet — a 1-inch S-PAL satin-anodised aluminium dome, the same tweeter technology Paradigm uses much further up the range, over a 3.5-inch mineral-filled polypropylene mid/bass. The original removable shelf-stand bases are fitted and tilt the drivers up at a seated listener. 88 dB in room, 8 ohms, 15 to 100 watts. Built in Canada. Good cosmetic condition.
B&W Solid HCM1 Compact Satellite Speakers with Integrated Stands
A sealed two-way from B&W's Rock Solid series — a 4-inch fibre cone woofer and a polycarbonate dome in a polycarbonate cabinet chosen to kill resonance without adding mass. 90 dB, so modest amplification is enough, and magnetically shielded for desk use. Each speaker comes on its integrated stand bracket. Mark runs a pair as his office near-fields. Cosmetics good, 7 out of 10; tested.
KEF HTS1001 Uni-Q Satellite Speakers Black (Single)
KEF's Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of the 3-inch mid-bass, so dispersion stays even off-axis and the far seat hears what the middle seat does. Sealed cast aluminium cabinet in high-gloss black, magnetically shielded, 120 Hz to 22 kHz, 86 dB, 10 to 100 watts. Terminals take bare wire or pin connectors. Very good cosmetic condition.
KEF HTS1001 Uni-Q Satellite Speakers Black Pair
KEF’s Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of a 3-inch mid-bass cone, so the pair behaves as a single source and the tonal balance holds across the room rather than in one chair. Sealed cast aluminium enclosures, 120 Hz to 22 kHz, 86 dB, magnetically shielded. Very good cosmetic condition.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite – Made in Canada
Both drivers fire upward into spoon-shaped reflectors Mirage calls OMNIGUIDEs, throwing sound through a full 360 degrees with a deliberate bias toward the front — which is what takes the sweet spot off a single chair. This is the original version at a genuine 7 lbs each, with a cast aluminium baffle and butyl rubber surrounds rather than foam. Built in Canada; condition very good.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
PSB VisionSound VS300 Aluminum On-Wall Speaker
An on-wall speaker engineered as one rather than adapted into one. It shares the tweeter, terminals and crossover of PSB's VS400 floorstander, but the port was moved to the front so the cabinet can sit flat to a wall without the wall changing what it does — and a rear switch selects NORMAL or ON-WALL, filling the 400 to 500 Hz dip that hard mounting creates. Extruded aluminium, built in Pickering, Ontario. Graded Excellent or Very Good; the only thing separating the two is a single Tic Tac-sized hole at the extreme edge of one grille frame.
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.
