





Technics SA-202 Attractive Vintage 30 WPC Stereo Receiver
$295.00
Out of stock
Email when stock available
Introducing the Technics SA-202 Stereo Receiver, a classic piece of audio equipment that combines vintage charm with solid performance. This receiver is perfect for enthusiasts of vintage audio and those seeking a reliable, great sounding stereo solution.
This SA-202 has been freshly serviced and is working beautifully. Lights have been upgraded to distinctive baby blue LED’s
Key Features:
– AM/FM Stereo Tuner with 5 Segment Signal Strength Indicator: Enjoy a wide range of radio broadcasts
– Phono Input: Connect your turntable for vinyl playback
– Auxiliary Input: Versatility to connect additional audio sources
– Headphone Jack: For private listening sessions
– Simple, Intuitive Controls: Easy-to-use knobs and switches for various functions
Technical Specifications:
– Power Output: 25 watts per channel into 8 ohms (20Hz-20kHz, 0.04% THD)
– Total Harmonic Distortion: 0.04% at rated power
– Frequency Response: 20Hz-20kHz
– FM Sensitivity: 10.8 dBf
– Signal-to-Noise Ratio: 73 dB (phono), 95 dB (aux)
– Channel Separation: 45 dB at 1 kHz
Design and Build Quality:
The Technics SA-202 features a classic silver-faced design typical of 1970s audio equipment. Its sturdy construction speaks to the build quality of vintage Technics products.
Sound Quality:
Known for its clean, neutral sound signature, the SA-202 delivers a well-balanced audio experience. While not as powerful as some higher-end models, it provides ample power for most home listening situations.
Additional Features:
– Rotary Bass and Treble Controls: Adjust the sound to your liking
– Balance Control: Fine-tune the stereo image
– Loudness Switch: Enhance low-frequency response at lower volumes
– FM Muting: Reduces inter-station noise when tuning
– Externally Accessible Speaker Protection Fuses
Dimensions and Weight: – Width: 17 inches (432 mm), – Height: 5.5 inches (140 mm), – Depth: 13 inches (330 mm), – Weight: Approximately 17.6 lbs (8 kg)
Perfect for Vintage Audio Enthusiasts:
The Technics SA-202 is ideal for those who appreciate the simplicity and charm of 1970s audio equipment. Whether you’re starting your vintage audio journey or adding to your collection, this receiver offers a glimpse into the golden age of hi-fi with its combination of reliable performance and classic aesthetics.
Experience the warm, inviting sound of vintage audio with the Technics SA-202. This receiver represents a piece of audio history that continues to provide enjoyment for music lovers and collectors alike.
Asking just $295 for this beautiful, vintage, made in Japan Technics Stereo Receiver in very good condition; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 21 lbs |
|---|---|
| Dimensions | 17 × 21 × 9.5 in |
Related Products
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
Luxman R-117 Flagship Stereo Receiver — 160 WPC, MM & MC Phono
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.








