Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
$695.00
1 in stock
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Design and Sound
Made in Japan, the Technics SA-600 is a genuine powerhouse from Panasonic’s flagship audio division — a 70-watt-per-channel AM/FM stereo receiver from 1978 that has lost none of its appeal in the decades since.
Seventy watts per channel into 8Ω (80 watts into 4Ω), with just 0.04% total harmonic distortion, is a specification that would have turned heads in 1978 and still impresses today. Technics achieved this through a high-current amplifier section capable of driving a wide range of speakers with authority and composure, and the SA-600 is equally at home pushing demanding floorstanding speakers as it is driving compact bookshelves to their limits. The sonic character is clean, controlled, and dynamic — Technics’ engineering heritage at its best.
The front panel is classic late-1970s Japanese design: a wide silver brushed-aluminum faceplate, warm amber dial illumination, a large analog tuning scale with signal and stereo indicators, and a solid bank of controls including Bass, Treble, Balance, Volume, and input selection. The walnut-grain side panels add warmth and furniture-friendly presence. A built-in MM phono stage makes the SA-600 a natural partner for any turntable, and dual tape monitor loops can do double duty as insert points for outboard equalization or signal processing. Speaker main and remote switching supports two independent pairs.
Condition
This unit has undergone our Level One service and testing, which should ensure many more years of reliable performance ahead.
Specifications
Type: AM/FM stereo receiver, solid-state, Made in Japan
Power output: 70 watts per channel into 8Ω; 80 watts per channel into 4Ω (stereo, both channels driven)
Total harmonic distortion: 0.04%
Frequency response: 20 Hz – 20 kHz
Damping factor: 50
Input sensitivity: 2.5 mV (MM phono), 150 mV (line)
Signal to noise ratio: 78 dB (MM phono), 95 dB (line)
Phono overload: 150 mV (1 kHz, RMS)
FM sensitivity: 1.9 µV (IHF); 1.2 µV (75Ω, S/N 26 dB)
Inputs: MM Phono, Aux, Tape 1 (REC/PLAY), Tape 2
Speaker outputs: Main and Remote pairs; 4–16Ω (single pair), 8–16Ω (both pairs simultaneously)
Finish: Brushed silver aluminum faceplate with walnut-grain side panels
Year: 1978
Dimensions: (Width x Height x Depth) 17.7 x 5.9 x 13.0 inches (450 x 149 x 329 mm)
Weight: 27.8 lbs (12.6 kg)
A beautifully preserved, Made-in-Japan Technics SA-600 with 70 watts per channel and genuine low-distortion pedigree — a superb anchor for any vintage stereo system.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
⭐ Don’t Just Take Our Word For It
Radique Audio holds over 600 customer ratings averaging 4.97 stars across six public platforms — Facebook Marketplace, Kijiji, Canuck Audio Mart, Google and others. Every rating lives somewhere we don’t control, so you can read the originals yourself, including the less flattering ones. See what our customers say. 👉
| Weight | 30 lbs |
|---|---|
| Dimensions | 17 × 21.7 × 9.9 in |
You may also like…
Ultralink High Def Power Conditioner with Display, BNIB HDC150
Eight surge-protected, filtered AC outlets with isolated banks for digital, video, audio and high-current components — four always-on, four switched.
Enough outlets for the whole stack, not just the amplifier — television, Blu-ray and streamer alongside a receiver, or turntable, CD player and cassette deck alongside a vintage amp. 3,500 joule protection, EMI/RFI filtration to 58 dB, and surge protection on the coax and network lines most conditioners leave unguarded. Patented ASP voltage monitoring and a 15 amp resettable breaker.
Brand new, unopened, in original packaging with full manufacturer warranty.
Related Products
Aurex (Toshiba) SA-5000 Stereo Receiver — 50 WPC, Made in Japan
Yamaha R-S300 Stereo Receiver — 50 WPC, MM Phono, Sub Out
A two-channel Yamaha receiver from the R-S series, 50 watts a side, with a proper moving-magnet phono stage, a subwoofer output and switching for two pairs of speakers.
✔️ Condition: Very Good — tested and confirmed working across all inputs and both speaker channels
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JVC RX-307 Stereo Receiver — 80 WPC, Original Remote & Manual
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.














