



Ultra Compact JBL satellite Speakers 125SAT
$65.00
A 3-inch midrange driver and a half-inch dome tweeter, both video-shielded, 200 Hz to 20 kHz at 86 dB into 8 ohms on 10 to 50 watts. Under four and a half inches wide and a pound each, so they sit on a desk or a shelf without asking for room. Designed and built in the USA.
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Read the full listing and see all 4 photos ↓
Other surround speakers we have in stock now
3 in stock · $55.00–$75.00 · all ship
Single Paradigm Satellite Speaker Cinema 70 v3$55.00Ships
Sony Slim Wall Mount Speakers **3 Ohms** SS-TS11$75.00Ships
Solidly Built Polk Satellite Speakers RM6751 (3 Pairs AVBL)$75.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →JBL 125SAT Satellite Speakers – Compact, Versatile Sound from JBL (USA)
Enhance your home audio or surround setup with the JBL 125SAT satellite speakers, designed and manufactured in the USA. These compact, video-shielded speakers deliver clear, detailed sound in a small footprint, making them ideal for bookshelf, desktop, or wall-mounted use. Perfect as part of a home theater system or as high-quality satellite speakers for stereo listening, the 125SATs offer the reliability and performance JBL is known for.
Features include a 3-inch video-shielded midrange driver and a 1/2-inch dome tweeter, ensuring crisp highs and balanced mids. With an 8-ohm nominal impedance and sensitivity of 86dB, these speakers are compatible with a wide range of amplifiers and AV receivers. Their lightweight, unobtrusive design allows for flexible placement in any room, and their robust build quality ensures years of dependable performance.
Specifications:
Recommended Power: 10–50 watts
Impedance: 8 ohms nominal
Sensitivity: 86dB @ 1 watt/1 meter
Tweeter: 1/2″ dome, video shielded
Midrange: 3″ driver, video shielded
Frequency Response: 200Hz – 20kHz
Dimensions: (Width x Height x Depth) 4-3/8 x 3-3/16 x 3-3/4 inches (111 x 81 x 95 mm)
Weight: 1 lb (0.45 kg) each
Dimensions: 4-3/8 x 3-3/16 x 3-3/4 inches (111 x 81 x 95 mm)
Weight: 1 lb (0.45 kg) each
The JBL 125SAT speakers are a superb choice for those seeking compact, American-made satellite speakers with JBL’s signature sound quality. Add them to your system today for a noticeable upgrade in clarity and detail—contact Radique Audio to bring these classics home!
Asking just $65 for this impressive pair of ultra-compact satellite speakers from JBL
| Weight | 4 lbs |
|---|---|
| Dimensions | 7.75 × 8.4 × 10.5 in |
Related Products
Insignia NS-SP211 2-Way Satellite Speakers, Shielded
A 3-inch woofer and a half-inch PEI dome in a sealed cabinet, 150 Hz to 20 kHz, 8 ohms, 80 watts peak. Keyhole slots are moulded into the back so they hang on a screw in any orientation without a bracket, and a detachable rubber base is included for shelf use. Magnetically shielded. Good cosmetic condition, tested.
Paradigm Cinema 100 CT Satellites speakers, Gloss Black
A sealed two-way in a sculpted mineral-filled polymer cabinet — a 1-inch S-PAL satin-anodised aluminium dome, the same tweeter technology Paradigm uses much further up the range, over a 3.5-inch mineral-filled polypropylene mid/bass. The original removable shelf-stand bases are fitted and tilt the drivers up at a seated listener. 88 dB in room, 8 ohms, 15 to 100 watts. Built in Canada. Good cosmetic condition.
B&W Solid HCM1 Compact Satellite Speakers with Integrated Stands
A sealed two-way from B&W's Rock Solid series — a 4-inch fibre cone woofer and a polycarbonate dome in a polycarbonate cabinet chosen to kill resonance without adding mass. 90 dB, so modest amplification is enough, and magnetically shielded for desk use. Each speaker comes on its integrated stand bracket. Mark runs a pair as his office near-fields. Cosmetics good, 7 out of 10; tested.
KEF HTS1001 Uni-Q Satellite Speakers Black (Single)
KEF's Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of the 3-inch mid-bass, so dispersion stays even off-axis and the far seat hears what the middle seat does. Sealed cast aluminium cabinet in high-gloss black, magnetically shielded, 120 Hz to 22 kHz, 86 dB, 10 to 100 watts. Terminals take bare wire or pin connectors. Very good cosmetic condition.
KEF HTS1001 Uni-Q Satellite Speakers Black Pair
KEF’s Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of a 3-inch mid-bass cone, so the pair behaves as a single source and the tonal balance holds across the room rather than in one chair. Sealed cast aluminium enclosures, 120 Hz to 22 kHz, 86 dB, magnetically shielded. Very good cosmetic condition.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite – Made in Canada
Both drivers fire upward into spoon-shaped reflectors Mirage calls OMNIGUIDEs, throwing sound through a full 360 degrees with a deliberate bias toward the front — which is what takes the sweet spot off a single chair. This is the original version at a genuine 7 lbs each, with a cast aluminium baffle and butyl rubber surrounds rather than foam. Built in Canada; condition very good.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
PSB VisionSound VS300 Aluminum On-Wall Speaker
An on-wall speaker engineered as one rather than adapted into one. It shares the tweeter, terminals and crossover of PSB's VS400 floorstander, but the port was moved to the front so the cabinet can sit flat to a wall without the wall changing what it does — and a rear switch selects NORMAL or ON-WALL, filling the 400 to 500 Hz dip that hard mounting creates. Extruded aluminium, built in Pickering, Ontario. Graded Excellent or Very Good; the only thing separating the two is a single Tic Tac-sized hole at the extreme edge of one grille frame.
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.










