Polk Audio RTi10 Floorstanding Speakers – Rare Cherry Real Wood
$795.00
Out of stock
Get first dibs on the next one
Polk Audio RTi10 Floorstanding Speakers – Rare Cherry Real Wood Finish, Very Good Condition, Tested
Experience the high-impact performance and stunning craftsmanship of these Polk Audio RTi10 towers—a premium 4-driver design that combines room-filling sound with the timeless beauty of real cherry wood veneer. Far rarer than the standard black oak finish, this cherry pair offers a furniture-grade aesthetic that warms any room while delivering the powerful, wide-open response Polk is famous for. Thoroughly tested and in very good cosmetic condition, these speakers are ready to breathe new life into your music and movies.
Dynamic Balance & 4-Driver Power:
The RTi10 features Polk’s latest generation of Dynamic Balance® drivers, laser-engineered to eliminate distortion-causing resonances. The 4-driver array is perfectly optimized for full-range impact:
1″ Silk/Polymer Dome Tweeter: Redesigned for stellar treble extension and airy detail without harshness.
6.5″ Polymer Composite Midrange: Delivers solid, natural vocals and instruments, housed in its own tuned enclosure with ARC (Acoustic Resonance Control) technology to ensure rich, uncolored midrange.
Dual 7″ Polymer Composite Woofers: Provide the room-rumbling bass authority that only a large tower can deliver—tight, punchy, and deep.
Advanced Cabinet Engineering:
The RTi10 utilizes Power Port Plus technology—a system of front and rear ports working with internal plates to reduce noisy air turbulence (chuffing) and dramatically increase bass efficiency. The result is visceral low-end impact that you can feel. The cabinet is finished in handsome real cherry wood veneer (not vinyl), a premium detail that elevates the RTi10 from “speaker” to “furniture.” The solid MDF construction minimizes internal resonances for cleaner sound reproduction.
Features & Build Quality:
Anti-Diffraction Grilles: Designed to minimize sonic interference for a large, open, three-dimensional soundstage with pinpoint imaging.
Bi-Amp/Bi-Wire Capable: Dual sets of gold-plated 5-way binding posts allow for advanced connection options to extract maximum performance.
Stabilizing Outriggers: Integrated stabilizing base with wide footprint for superior stability.
Radique Audio Felt Pads: Pre-mounted with our high-density felt pads, ideal for hardwood, laminate, or tile floors—protects your surfaces while providing a stable, acoustically neutral foundation.
Video Shielded: Safe for placement near legacy CRT televisions or sensitive electronics.
Specifications:
Design: 3-Way, Bass Reflex with Power Port Plus
Drivers: 1″ (25mm) Silk/Polymer Dome Tweeter, 6.5″ (165mm) Midrange, Dual 7″ (178mm) Woofers
Frequency Response: 35Hz – 26kHz (-3dB limits) / 20Hz – 27kHz (Total)
Impedance: 8Ω Nominal
Sensitivity: 89 dB
Recommended Amplifier Power: 20 – 300 Watts per channel
Terminals: Dual Gold-Plated 5-Way Binding Posts
Finish: Real Cherry Wood Veneer
Dimensions: 279 x 1108 x 451 mm (11″ W x 43.6″ H x 17.8″ D) – including outrigger base
Weight: 29.9 kg (66 lbs) per speaker
Condition:
This pair is in very good cosmetic condition. The rare cherry wood veneer is rich and attractive, showing only minor signs of age consistent with responsible ownership. The grilles are intact and clean.
Functionally Tested: All drivers (tweeters, midranges, and woofers) have been sweep-tested and verified to perform perfectly with no rubbing, buzzing, or distortion.
Summary:
The Polk RTi10 represents the sweet spot of high-performance audio: serious engineering that delivers massive, detailed sound, wrapped in a cabinet that looks like fine furniture. The rare cherry finish makes this pair a standout choice for those who want their speakers to look as good as they sound. With 300 watts of power handling and genuine deep bass capability, they are equally at home anchoring a high-end stereo system or a powerful home theater. Ready to place on hard floors with our premium felt pads already installed.
Purchase with Confidence
Includes Radique Audio “Bumper to Bumper” Warranty
Perpetual Trade-Back Policy—upgrade or swap with peace of mind
Real wood craftsmanship—tested, very good condition, ready to play; asking $795.
| Weight | 138 lbs |
|---|---|
| Dimensions | 22 × 28 × 47.6 in |
- Hard-to-beat pricing
- Free shipping across Canada
- Manufacturer's warranty
- Get a quote on new Polk
Polk Audio began in Baltimore in 1972, founded by Matthew Polk, George Klopfer and Sandy Gross. Its SDA speakers of the 1980s used a cable between the left and right speakers to widen the stereo image. We carry Polk towers, bookshelf speakers, centre channels and subwoofers. We've had more than 180 Polk listings so far, covering more than 80 different models. Every used Polk here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Looking for new Polk? We also quote new Polk Audio direct from the Canadian distributor, with free shipping within Canada: request a quote below. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
Our five best-selling Polk models so far: the RTi10 towers, the PSW10 and PSW125 subwoofers, the RTi4 bookshelf speakers and the CSi3 centre.
The Polk story, 1972 to today
Matthew Polk, George Klopfer and Sandy Gross, graduates of Johns Hopkins, founded Polk Audio in Baltimore, Maryland, in 1972. The Monitor 7 of 1974 was their first model to succeed, and the Monitor 10 followed in 1976.
SDA. In 1984 Polk introduced SDA (Stereo Dimensional Array). A cable between the left and right speakers lets each one cancel the sound that crosses over to the wrong ear, for a wider stereo image.
Growth. Polk went public in 1986 and moved to new premises in Baltimore. It began moving manufacturing to Tijuana, Mexico, in 1988, and by 2012 Stereophile reported that Polk designed in the US and built in China.
New owners. Directed Electronics agreed to buy Polk in 2006. Polk later became part of Sound United, Masimo bought Sound United in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 2018 Legend series brought SDA back.
Which Polk is which?
Monitor (1970s to early 1990s): the Monitor 4, 5, 7, 10 and 12, with A, B and C revisions.
SDA (1984 to about 1991): the SDA-1 and SDA-2 families, CRS, SRS and the later "TL" models.
RTA (1979 to 1992): towers such as the RTA 11t, with two woofers and two passive radiators.
RT and RTi (2001 onward): Polk's lower-priced lines. Our best-selling RTi10 towers and RTi4 bookshelf speakers come from here.
CSi centres and PSW subwoofers: the CSi3 centre and the PSW10 and PSW125 subwoofers are among the Polks we sell most.
LSi (about 2001 to 2010) and LSiM (2011): Polk's flagship lines of that decade, followed by Signature (2016), Legend (2018) and Reserve (2021).
Buying used Polk: what to check
SDA cable. SDA speakers need the interconnect cable between them for the SDA effect, and early SDA models need a common-ground amplifier. Make sure the cable comes with the pair.
Tweeters. Owners report that some SL3000 tweeters on the 1989 to 1991 SDA TL models leaked their ferrofluid and failed, and that Monitor-series pairs may carry mismatched factory or replacement tweeters. Check that every tweeter plays.
Surrounds. Some early Polks used foam surrounds, which rot with age; later models such as the RTA 11t and LSiM use rubber. Press gently on each woofer surround.
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
You may also like…
IsoAcoustics GAIA I Speaker Isolators (Set of 4)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 isolators for one heavy floor-standing speaker or subwoofer up to 220 lb (100 kg)
- ✔️ Screws in place of your spikes: M8-1.25, M12-1.25 and 1/4″-20 adaptors included
- ✔️ Machined stainless steel, dark chrome, 2.5 × 1.9 in (62 × 49 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
IsoAcoustics GAIA II Speaker Isolators (Set of 4)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 isolators for one floor-standing speaker or subwoofer up to 120 lb (54 kg)
- ✔️ Screws in place of your spikes: M6-1.0, M8-1.25 and 1/4″-20 adaptors included
- ✔️ Machined stainless steel, dark chrome, 2 × 1.7 in (51 × 43 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
Related Products
Klipsch RF-62 Reference IV Floorstanding Speakers, Pair — 97dB
The RF-62 is the tower that made Klipsch's Reference line the default answer for anyone who wanted a big, unforced sound without buying a big, expensive amplifier to get it.
✔️ Condition: Good — cabinets carry touched-up wear; drivers Very Good throughout
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Curbside delivery, local collection or freight within Canada
Focal Chorus 714V Floorstanders, Pair — Light Walnut, France
A pair of Focal Chorus 714V floorstanding loudspeakers in Light Walnut, made in France.
✔️ Condition: Very Good — thoroughly inspected and tested
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JBL Northridge E80 3-Way Towers – Cherry, Bi-Wirable, Pair
A four-driver JBL tower in the Cherry finish, with a genuine bi-amp panel.
✔️ Condition: Very Good — cabinets present well, working properly
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Mirage OMNI 350 Omnipolar Towers – Designed in Canada, Black Ash
A pair of slim Mirage towers built around the company's Omnipolar design, in very good condition, that fill a room with sound instead of aiming it at one chair.
✔️ Very Good condition — black ash cabinets, drivers and grilles present cleanly
✔️ Designed and engineered in Canada around Mirage's room-filling Omnipolar sound
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Monitor Audio Silver S8 Towers – Made in England, Warm Beech
A pair of three-way Monitor Audio towers from the Silver S range, in very good condition, with a metal driver in every position and a warm beech veneer that suits almost any room.
✔️ Very good condition — free of significant marks, in Warm Beech real wood veneer
✔️ Made in England, with Monitor Audio's C-CAM metal drivers throughout
✔️ Bi-wire and bi-amp ready — two pairs of 5-way binding posts per speaker
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JVC Theatre Series SP-5500 Tower Speakers, Pair – 8-inch Woofers
A pair of JVC Theatre Series SP-5500 two-way tower speakers in black woodgrain, with front-ported bass-reflex cabinets, tested on our bench and in very good condition.
✔️ Very good condition — free of significant marks, grilles included
✔️ 8-inch woofers in front-ported Theatre Series towers
✔️ Built-in circuit breaker protects the tweeters
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Vintage Pioneer CS-77 12″ 3-Way Speakers, Pair – Made in Japan
A pair of late-1960s Pioneer CS-77 three-way speakers, made in Japan, in walnut veneer cabinets with their wooden diamond-lattice grilles. Their High Level controls have been freshly serviced, they have been tested on our bench, and they are in good condition.
✔️ Good condition — walnut veneer, wooden lattice grilles included
✔️ High Level controls freshly serviced, tested on our bench
✔️ 12-inch woofer, three-way design — made in Japan, late 1960s
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Linn Keilidh Floorstanding Speakers, Pair – Made in Scotland
A pair of Linn Keilidh floorstanding speakers, built in Glasgow, Scotland, in Linn's deep red Rosenut veneer, set up for bi-wiring.
✔️ Tested on our bench
✔️ Very good condition
✔️ Bi-wire ready: build your cable with our Cable Builder
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Acoustic Research TSW 510 Vintage Towers, Pair – Refoamed, Oak
A pair of Acoustic Research TSW 510 three-way floorstanding speakers from the late 1980s, with solid oak tops and plinths, freshly refoamed.
✔️ Freshly refoamed woofers and midranges
✔️ Very good condition, grilles included
✔️ 3-way acoustic suspension, 10" woofer, titanium tweeter
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Curbside delivery, local collection or freight within Canada
