Luxman F-105 Stereo Preamplifier + Power Amp — Dolby, Japan
$245.00
1 in stock
Luxman F-105 — A Japanese Luxman Preamplifier with Its Own 25-Watt Amplifier and a 1980s Surround Section Built In
Between 1986 and 1990, during Luxman’s Alpine era, the company built the F-105 as a control centre. Luxman badged it a surround amplifier, but that undersells what this actually is: a Luxman preamplifier, a compact power amplifier, and a surround processor sharing one chassis three and a half inches tall. Few components of any size play this many roles; almost none do it in this little space.
No Remote — Said Up Front
One answer up front, because everyone asks: this unit comes without a remote — everything is operated from the front panel.
The Preamplifier
As a dedicated two-channel preamplifier, it earns the Luxman badge: inputs for CD, tuner, two tape loops with dubbing, and two more line-level sources, with tone controls, mute, and proper stereo line outputs to feed any power amplifier. The tape loops also make it ideal for adding an EQ or other outboard processing. A Bypass mode takes all processing out of the signal path when you want the line stage doing nothing but its job.
The Built-In Amplifier
The built-in amplifier adds a second role: at 25 watts per channel into 8 ohms it will drive a pair of speakers directly, making the F-105 a complete, compact system for a desk, den, or workshop — source in, speakers out, done.
The 1980s Surround Section
The surround section is the third act, and the historically interesting one. Four modes — Dolby Surround for film, Time Delay Surround adjustable in 5 ms steps, Matrix, and Simulated Stereo for mono sources — with the delay built on analog BBD elements, the same technology behind the classic studio delays of the era. Add a pair of rear speakers to any stereo system and it becomes a full surround setup without replacing anything you own; a mono centre output feeds a centre speaker through any small amp.
What It Is Not
It should be said plainly what this is not: the surround modes are 1980s matrix Dolby, not Dolby Digital or any modern format. But judged as what it is — preamp, amplifier, and surround processor in one rare box — there is very little it cannot anchor: a serious two-channel rig, a desktop system, a vintage surround setup, or all three in succession as your needs change. It is almost never seen in North America.
Condition and Testing
Freshly tested on our bench: all inputs, all four surround modes, and the amplifier section confirmed working. Cosmetically this example is graded Very Good — it presents well, with only the standard signs of use and no significant cosmetic flaws.
A few relevant specifications:
A Japanese-built Luxman that does the work of two boxes in one, for the system that wants proper control without the rack.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
Luxman F-105 Specifications
- Four surround modes: Dolby Surround, Time Delay, Matrix, Simulated Stereo, plus Bypass
- Built-in rear-channel amplifier: 25 watts per channel into 8 ohms
- Surround delay adjustable in 5 ms steps, analog BBD circuit
- Mono center-channel output; stereo line outputs
- Inputs: CD, tuner, two tape loops with dubbing (ideal for adding an EQ), and two additional line sources
- Tone controls, mute, and full bypass
- Dimensions: 17.2″ W x 3.5″ H x 11.8″ D; weight 13.2 lbs
- Made in Japan, 1986–1990
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 15.2 lbs |
|---|---|
| Dimensions | 15.8 × 21.2 × 7.5 in |
You may also like…
Luxman R-117 Flagship Stereo Receiver — 160 WPC, MM & MC Phono
Luxman LV-90 Stereo Integrated Amplifier 35W – Phono, Japan
Gold Series RCA Stereo Interconnect | Radique Audio
Radique Audio Gold Series RCA Stereo Interconnect — dual RCA to dual RCA with vintage-safe, gold-plated connectors and 6-layer shielded construction. Featuring 262 strands of tinned copper, dual-layer copper and foil shielding, and slim narrow-profile connector barrels designed to fit tightly spaced vintage RCA jacks. Available in 0.2 m, 0.75 m, and 1.5 m lengths. Audiophile quality without the audiophile pricing.
Related Products
Denon PMA-600NE Integrated Amp, Current Model, 45 WPC, Phono, BT
Braun Atelier A1 Slim Integrated Amp — 55 WPC, Pre-Out, Japan
The component that makes the rest of an Atelier system work, and the one people hunting these usually look for first. 55 watts per channel into 8 ohms and 80 into 4, with a preamplifier section that separates from the power stage — engineering that is not an afterthought to the industrial design. 445 mm wide and 70 mm tall, the exact footprint of the T1 tuner and C1 deck, so the stack reads as one machined object. Made in Japan for Braun. Good condition.
Technics SU-V76 New Class A Integrated Amp 100 WPC — Japan
A 1987 New Class A integrated: pure Class A at low levels, sliding to Class A/B when the music asks for it, 100 watts a channel into 8 ohms at 0.05% distortion. It draws about 30 watts at idle, which is how you know the Class A bias is real rather than a label. MM phono and A/B speaker switching. Level 1 serviced; good cosmetic condition.
Monster Technics SU-G90 130 WPC Integrated Amp – Made in Japan
130 watts a channel into 8 ohms with both channels driven at 0.05% distortion, six analog inputs and an MM phono stage. This 1991 design also carries a Dolby Pro Logic decoder with its own 15-watt rear amplifier section, so it can run a compact surround setup on its own. Made in Japan; good cosmetic condition.
Sansui A-900P 70 WPC Integrated Amplifier – Made in Japan
Seventy watts a channel into 8 ohms at 0.05% distortion, from a DC servo output stage, with frequency response running from 5 Hz to 60 kHz. Moving-magnet phono at 2.5mV, line inputs for tuner, CD and aux, and a tape monitor loop for an outboard EQ. Built in Japan between 1985 and 1986. Condition very good; inspected and tested.
LXI AM4002 Integrated Amplifier 80 WPC (est), Dual Phono
Sold through Sears in the late seventies and heavier than that suggests — 22.9 lb, a 450 VA power rating, and metal knobs on everything. Two separate phono inputs, tape monitor and dubbing, subsonic and high filters, A/B speakers, and a front-panel mic mixing input. No factory manual survives, so the 80 WPC is our own conservative estimate. Level 1 serviced here; good cosmetic condition.













