Harman Kardon PM640VXi Ultrawideband Amp — 45 WPC, Made in Japan
$295.00
A 45-watt amplifier built by a company that spent the 1980s arguing the watts were the wrong thing to look at.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
1 in stock
A 45-watt amplifier built by a company that spent the 1980s arguing the watts were the wrong thing to look at.
Harman Kardon’s position was that music is made of transients, and what a transient asks of an amplifier is not sustained power but current, delivered instantly. They engineered for that and called it High Instantaneous Current Capability. The PM640VXi will deliver plus or minus eighteen amperes on demand. The practical result is an amplifier that sounds unbothered by speakers its power rating says it has no business driving, and it is why people who owned these in the eighties tend to speak about them the way they do.
Two things make that current available. The first is a power supply far larger than 45 watts per channel requires — the transformer accounts for a startling share of the weight. The second is the design philosophy around it: low negative feedback, and the ultrawideband response Harman Kardon built their reputation on — quoted here from half a hertz to 167 kilohertz. Wide-bandwidth designs of this era were chasing the phase behaviour inside the audible band, not the inaudible extremes themselves, and Harman Kardon were among the most committed to it.
The phono stage is fully discrete — no op-amps in the signal path — and it is the part of this amplifier people single out most often. If you are running a turntable, this is a considerably better front end than the phono sections fitted to most integrated amplifiers of the period.
The facilities are generous. Two pairs of speakers, switchable, and two tape decks with dubbing between them. Phono, tuner, video and both tape loops. Bass, treble and balance, with tone defeat to take the controls out of circuit entirely. Loudness contour, a subsonic filter, and a switch for stereo, mono or reversed stereo. Headphone socket on the front.
Built in Japan, and the VXi generation of 1987 and 1988 is the more powerful one — 45 watts per channel rather than the 35 of the earlier PM640, in a slightly larger chassis and with wider bandwidth. It is worth knowing the difference, because the two are routinely confused and the specifications get mixed up between them.
At roughly four inches tall and just over seventeen wide, it is a compact, low, unobtrusive component.
Condition is Very Good.
A few relevant specifications:
A compact Japanese-built integrated with a serious power supply, a discrete phono stage and far more current on tap than its rating suggests.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
Harman Kardon PM640VXi integrated amplifier Specifications
- Stereo integrated amplifier with High Instantaneous Current Capability, ±18 A
- Power output 45 watts per channel into 8 ohms
- Total harmonic distortion 0.09% into 8 ohms
- Frequency response 0.5 Hz to 167 kHz
- Damping factor 58
- Input sensitivity 2.2 mV (MM phono), 135 mV (line)
- Signal-to-noise ratio 80 dB (MM phono), 83.7 dB (line)
- Channel separation 58 dB (MM phono), 67 dB (line)
- Fully discrete phono stage
- Inputs: phono, tuner, video, tape 1 and tape 2 with dubbing
- Two switchable speaker pairs; front headphone socket
- Bass, treble, balance, tone defeat, loudness contour, subsonic filter
- Stereo / mono / reverse-stereo switching
- Made in Japan, 1987-88
- Dimensions: (Width x Height x Depth) 17.4 x 4.1 x 13.8 inches (443 x 103 x 351 mm)
- Weight: 12.1 lbs (5.5 kg)
🎚️ Gold Series RCA Interconnects
Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉
🔌 Speaker Cable, Built on Our Own Bench
The speaker terminals here take banana plugs — the quickest and tidiest connection there is, and the one you want if anything ever gets moved. We hand-build speaker cable here in any length you need on our Custom Speaker Cable Builder, terminated with our own gold-plated banana plugs. If you already have cable you are happy with, we sell the plugs on their own. 👉
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 14.1 lbs |
|---|---|
| Dimensions | 17.8 × 21.4 × 8.1 in |
You may also like…
Gold Series RCA Stereo Interconnect | Radique Audio
Radique Audio Gold Series RCA Stereo Interconnect — dual RCA to dual RCA with vintage-safe, gold-plated connectors and 6-layer shielded construction. Featuring 262 strands of tinned copper, dual-layer copper and foil shielding, and slim narrow-profile connector barrels designed to fit tightly spaced vintage RCA jacks. Available in 0.2 m, 0.75 m, and 1.5 m lengths. Audiophile quality without the audiophile pricing.
Related Products
LXI AM4002 Integrated Amplifier 80 WPC (est), Dual Phono
Sold through Sears in the late seventies and heavier than that suggests — 22.9 lb, a 450 VA power rating, and metal knobs on everything. Two separate phono inputs, tape monitor and dubbing, subsonic and high filters, A/B speakers, and a front-panel mic mixing input. No factory manual survives, so the 80 WPC is our own conservative estimate. Level 1 serviced here; good cosmetic condition.
Luxman LV-90 Stereo Integrated Amplifier 35W – Phono, Japan
Denon PMA-600NE Integrated Amp, Current Model, 45 WPC, Phono, BT
Braun Atelier A1 Slim Integrated Amp — 55 WPC, Pre-Out, Japan
The component that makes the rest of an Atelier system work, and the one people hunting these usually look for first. 55 watts per channel into 8 ohms and 80 into 4, with a preamplifier section that separates from the power stage — engineering that is not an afterthought to the industrial design. 445 mm wide and 70 mm tall, the exact footprint of the T1 tuner and C1 deck, so the stack reads as one machined object. Made in Japan for Braun. Good condition.
Luxman F-105 Stereo Preamplifier + Power Amp — Dolby, Japan
Arcam Alpha 5 Integrated Amplifier — 40 WPC, Made in England
A British integrated amplifier from Arcam's Cambridge factory, 40 watts a side, built on the principle that anything which does not improve the sound does not go in the box.
✔️ Condition: Very Good — tested and working properly
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Sansui A-900P 70 WPC Integrated Amplifier – Made in Japan
Seventy watts a channel into 8 ohms at 0.05% distortion, from a DC servo output stage, with frequency response running from 5 Hz to 60 kHz. Moving-magnet phono at 2.5mV, line inputs for tuner, CD and aux, and a tape monitor loop for an outboard EQ. Built in Japan between 1985 and 1986. Condition very good; inspected and tested.












