Yamaha R-S300 Stereo Receiver – 50 WPC, MM Phono, Sub Out
$245.00
A two-channel Yamaha receiver from the R-S series, 50 watts a side, with a proper moving-magnet phono stage, a subwoofer output and switching for two pairs of speakers.
✔️ Condition: Very Good — tested and confirmed working across all inputs and both speaker channels
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Out of stock
This one has sold. Want first dibs on the next one?
We take these in regularly. Leave your name and email, and we’ll email you the moment one is listed, so you hear first. No cost, no obligation.
Email me when one is listed
Give your next receiver Bluetooth. RA-Twin II, $39.00 →
Other stereo receivers we have in stock now
3 in stock · $245.00 · all ship
TEAC AG-790 Stereo Receiver – 100 WPC, Phono, Made in Japan$245.00Ships
Harman Kardon HK3300 Stereo Receiver – 20 WPC$245.00Ships
Give your next receiver Bluetooth.
The RA-Twin II adds Bluetooth streaming to any vintage receiver or amp with a spare input. Phone to stereo in about a minute, and nothing on the receiver is modified.
RA-Twin II, $39.00 →A two-channel Yamaha receiver from the R-S series, 50 watts a side, with a proper moving-magnet phono stage, a subwoofer output and switching for two pairs of speakers.
There is a particular problem this receiver solves better than almost anything else at the price. Someone has a turntable, or is about to buy one, and wants a real system rather than a powered-speaker compromise — and every modern receiver at the money is a five-channel home theatre box with a menu system, six HDMI inputs and no phono input at all. The R-S300 is the opposite of that. Two channels, a volume knob, bass and treble, and a phono stage that works.
That phono stage is the reason to care. It is a genuine moving-magnet input rated at 87 decibels signal-to-noise, not the afterthought circuit that turns up on budget gear, and it means a turntable connects directly with no outboard preamplifier and no extra box on the shelf.
The amplifier behind it is better specified than the modest wattage suggests. Yamaha rates 50 watts per channel across the full band at 0.04 percent distortion, but the dynamic power figures tell the more useful story: 70 watts into 8 ohms, 89 into 4, and 100 into 2. That is an amplifier with current in reserve, and the damping factor of 150 reflects the same thing — it grips a woofer rather than letting it ring. It is rated for 4-ohm loads, so it is not fussy about what you connect to it.
Pure Direct is the switch worth knowing about. It takes the tone controls, the balance control and the loudness circuit out of the signal path entirely, leaving the shortest route from input to output. With it engaged the response runs from 10 hertz to 100 kilohertz within a single decibel, and signal-to-noise measures 100 decibels.
The rest is sensible rather than showy. Forty AM and FM presets. A mono subwoofer output, so a powered sub can be added later without replacing anything. Binding posts rather than spring clips, and front-panel switching between two pairs of speakers — useful if you want a second pair in another room, or simply want to compare. A headphone jack, a sleep timer, and an auto-standby that shuts the receiver down after a set number of hours. The front panel is extruded aluminum, and the chassis uses Yamaha’s ART Base construction, which braces the whole assembly against its own vibration.
It sold new for $499 in Canada in 2010 — around $740 in 2026 Canadian dollars.
Condition is Very Good, and it has been tested and confirmed working properly across all inputs and both speaker channels.
No remote control is included with this receiver. Saying so plainly because it is the question people ask, and because the answer is better than it sounds: every function lives on the front panel. Source selection, volume, bass, treble, balance, loudness and the A/B speaker switching are all there under your hand. The remote is a convenience on this model, not a requirement, and nothing about the receiver is out of reach without one.
A few relevant specifications:
A well-built modern two-channel receiver with the phono stage a turntable actually needs, at well under what it cost new.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
Yamaha R-S300 stereo receiver Specifications
- Two-channel stereo receiver, 50 W + 50 W into 8 ohms, 20 Hz to 20 kHz, 0.04% THD
- Dynamic power 70 / 77 / 89 / 100 W into 8 / 6 / 4 / 2 ohms
- Total harmonic distortion 0.015% at 25 W into 8 ohms
- Frequency response 10 Hz to 100 kHz, ±1 dB, Pure Direct engaged
- Signal-to-noise ratio 100 dB, line; 87 dB, moving-magnet phono
- Damping factor 150
- Input sensitivity 3.5 mV phono, 200 mV line
- Minimum speaker impedance 4 ohms
- Five audio inputs including moving-magnet phono; two outputs
- Mono subwoofer output
- Two speaker pairs, A and B, on binding posts
- Pure Direct, continuously variable loudness, bass and treble
- FM 50 dB quieting sensitivity 3 µV; FM signal-to-noise 74 dB mono, 70 dB stereo
- Forty AM and FM presets
- Headphone jack, sleep timer, auto power standby
- Aluminum-extruded front panel, ART Base chassis
- Introduced 2010
- Dimensions: (Width x Height x Depth) 17.1 x 5.9 x 15.2 inches (435 x 151 x 387 mm)
- Weight: 19.4 lbs (8.8 kg)
🎚️ Gold Series RCA Interconnects
Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉
🔊 Subwoofer Cable
This subwoofer takes a line-level feed on RCA. Our Gold Series Subwoofer Cable is a shielded lead built for exactly that run, in stock and ready to go. 👉
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 21.4 lbs |
|---|---|
| Dimensions | 19.2 × 21.1 × 9.9 in |
Yamaha began as an organ maker in Hamamatsu, Japan, in 1887. It made gramophones from the 1920s and began hi-fi with the 1954 HiFi Player. We carry Yamaha AV receivers, vintage stereo receivers, CD players, subwoofers and speakers. We've had more than 280 Yamaha listings so far, covering nearly 200 different models. Every used Yamaha here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Every AV receiver we list is tested input by input on our bench: each HDMI input and output, the analog, optical and coaxial inputs, the subwoofer outputs and the wireless features where it has them. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
Yamaha models we've sold most often: the SW-3 subwoofer, the NX-E270 surrounds, and the RX-V1400, RX-V850 and RX-V800 AV receivers.
The Yamaha hi-fi story
Torakusu Yamaha built his first reed organ in Hamamatsu in 1887 and founded Nippon Gakki in 1897; the company was renamed Yamaha Corporation in 1987. Yamaha calls the 1954 HiFi Player its first audio product, and dates its first Natural Sound (NS) speakers to 1967.
1970s hi-fi. The CA-700 and CA-500 of 1972 were Yamaha's first integrated amplifiers, and the CA-1000 of 1973 could switch its output stage between Class A and Class A/B. The NS-1000 and NS-1000M speakers of 1974 used beryllium dome drivers, and the NS-10M of 1978, sold for home use, became a studio monitor.
CD and surround. The CD-1 of 1982 was Yamaha's first CD player. The DSP-1 of 1986 was a Digital Sound Field Processor, and in 1993 the RX-V870 became the first Yamaha receiver with CINEMA DSP. The RX-V992 of 1997 added built-in Dolby Digital decoding.
AVENTAGE. The AVENTAGE (RX-A) receiver line launched in 2010, above the RX-V range.
Which Yamaha is which?
CA integrated amplifiers (1972 to about 1979): the CA-500, CA-700, CA-1000 and CA-2000, followed by the A-series.
CR receivers (mid-1970s to about 1980): the CR-1000, then the CR-620 to CR-2020 generation of 1977 to 1979.
NS speakers: from the NS-690 and the beryllium NS-1000 to the NS-10M bookshelf speaker, made from 1978 to 2001.
CD players: from the CD-1 of 1982 to the CDX and GT-CD models.
RX-V AV receivers (from at least 1991): such as the RX-V800, RX-V850 and RX-V1400 we sell often. Built-in Dolby Digital arrived in 1997, YPAO room calibration in 2003 and HDMI in the mid-2000s.
RX-A AVENTAGE (from 2010): the step-up AV receivers. The RX-Z models were the flagships until 2007.
Buying used Yamaha: what to check
Formats. On an AV receiver, check what it decodes and connects to: Dolby Digital from 1997, room calibration from 2003, HDMI from the mid-2000s.
HDMI boards. On modern AV receivers, HDMI is usually the first thing to fail. We test every HDMI input and output before listing.
CR receivers. Owners suggest asking whether service bulletins were done on a CR-2020, and expect scratchy controls and burnt-out dial lamps on any unserviced unit.
NS speakers. Check that the tweeters on an NS-10M are original and both work, and inspect the beryllium domes on an NS-1000, since Yamaha stopped making beryllium diaphragms in 1997.
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
You may also like…
Radique Audio Gold Series Subwoofer Cable – 2 to 10 m
A quiet run to your subwoofer: dual-shielded, in 2, 3, 5 or 10 m.
- Six-layer construction; foil and 128-strand braided copper shields
- Dual degaussing rings against magnetic interference
- Slim gold-plated RCA plugs for crowded panels
- 7 mm gold cotton mesh jacket
- 1-year warranty
Radique Audio Gold Series RCA Stereo Interconnect Cable
RCA cables that are kind to vintage jacks: dual RCA to dual RCA, in 0.2, 0.75 or 1.5 m.
- Slim gold-plated plugs with vintage-safe grip pressure
- Dual shielding: aluminum foil and 128-strand braided copper
- Reinforced splitters; 7 mm gold cotton and nylon mesh jacket
- Three lengths, chosen above the Add to Cart button
- 1-year warranty
Related Products
Denon DRA-835R Vintage Stereo Receiver – 100 WPC, Made in Japan
The second-from-the-top model in Denon's early-nineties stereo receiver range, made in Japan and in very good condition, with 100 watts per channel, a phono stage, motorized volume and its original remote.
✔️ Very good condition — free of significant marks
✔️ 100 WPC, MM phono and motorized volume — made in Japan
✔️ Original Denon remote included
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Realistic STA-20 Compact AM/FM Stereo Receiver – 5 WPC, Serviced
Radio Shack's smallest AM/FM stereo receiver of the 1990s, the Realistic STA-20: 5 watts per channel, a rear EQ switch made for mini-speakers, a phono input and a front jack for a phone.
✔️ Serviced on our bench to our Level 1 standard
✔️ Very good condition
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Akai AA-1115 Vintage Stereo Receiver – 15 WPC, Made in Japan
A slim late-1970s Akai AA-1115 AM/FM stereo receiver, made in Japan, silver face in its original woodgrain cabinet.
✔️ Tested on our bench, every input, output and control
✔️ Very good condition
✔️ MM phono, PLL FM tuner, speakers A and B
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Carver HR-772 Sonic Holography Receiver – 140 WPC, Rack Ears
A Carver HR-772 stereo receiver, Carver's early-1990s flagship: 140 watts per channel, Sonic Holography, and rack ears with front handles.
✔️ Tested on our bench, Sonic Holography included
✔️ Very good condition
✔️ 140 WPC, stable to 2 ohms, MM phono, five-band EQ
✔️ Rack ears and handles for a 19-inch rack
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Sony STR-V2 Vintage Receiver – 25 WPC, Ottawa Valley Cherry
A 1978 Sony STR-V2 stereo receiver, dressed in Ottawa Valley cherry side panels hand-made by our master woodworker, Sean. Tested on our bench and working well.
✔️ 25 watts per channel, with a phono input for your turntable
✔️ Brushed silver faceplate with a long FM/AM dial and signal meter
✔️ Ottawa Valley cherry side panels, hand-made for this receiver
✔️ Tested on our bench and working well
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JVC RX-307 Stereo Receiver – 80 WPC, Original Remote & Manual
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Onkyo TX-906 Stereo Receiver – 80 WPC, Dolby Pro Logic
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
✔️ Good condition — works as it should; the black cabinet and faceplate present well
✔️ Through our Level 1 service — cleaned, deoxidized, checked and thoroughly tested on our bench
✔️ Phono input for your turntable, plus CD and two tape inputs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
