Good Quality, Powerful Yamaha 630 Watt 6.1 AVR HTR-5750
$145.00
A silver-faced Yamaha 6.1 receiver rated at 630 watts total, with four digital inputs — three optical and one coaxial — a 5.1 analog input, and eight pairs of banana-ready speaker outputs. Impedance switching, S-video upconversion across 60 MHz of video bandwidth, lip-sync delay to 160 ms, and 29 surround programs. Universal remote and PDF manual included.
1 in stock
High powered Yamaha AVR in Silver finish, with above average sound quality and a good feature set, boasting 5.1 inputs, 4 x Digital inputs (3 x Optical, 1 x Coax), impedance switching, and 8 Pairs of Banana plug speaker outputs.
Other Features:
S-Video Up Conversion
HDTV (720p/1080i) Compatibility
Wide-Range Video Bandwidth (60MHz -3 dB)
Analog Mixdown
Direct Stereo Mode
Straight/Effect Switch
2-Channel Mode
High Dynamic Power, Low Impedance Drive Capability
Audio Delay for adjusting Lip Sinc (0-160ms)
29 Surround Programs (51 Variations)
Night Listening Enhancer (Cinema/Music) and SILENT CINEMA
Linear Damping
Wide-Range Audio Frequency Response for
DVD-Audio/SA-CD Compatibility
Subwoofer Output
Subwoofer Phase Select
Speaker A, B, and A+B Selection (Front L/R)
Easy Menu Setup (Basic Mode)
Program Name and Sound Field Indications
Center Graphic Equalizer
Virtual CINEMA DSP
Sleep Timer
Auto Preset Tuning
Digital ToP-ART
SILENT CINEMA and Virtual CINEMA DSP
Dimensions: 435 x 161 x 416mm / 17.13″ x 6.38″ x 16.38″, Weight: 11 kg / 24 lbs. 4 oz.
Includes soft copy of manual in PDF, and pre-programmed Universal remote
Asking $145
| Weight | 27.25 lbs |
|---|---|
| Dimensions | 21.13 × 20.38 × 10.38 in |
You may also like…
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Related Products
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
Onkyo TX-NR737 770W 7.2 Atmos 4K Wi-Fi Bluetooth THX AVR
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
