Budget Yamaha 375 Watt 5.1 AVR with Remote RX-V430
$125.00
Seventy-five watts to each of five channels, with Yamaha’s Quad-Field CINEMA DSP running 21 surround programs and a 32-bit YSS-938 processor behind Dolby Digital, Pro Logic II and DTS. One optical and one coaxial digital input, a subwoofer pre-out, six-channel external decoder inputs, and a 4 or 8 ohm impedance setting. A pre-programmed universal remote is included. Fully tested and working well.
1 in stock
Budget, feature loaded 375 Watt 5.1 AVR from Yamaha
Features:
The RX-V430 is a powerful and versatile 5-channel receiver, delivering 75 watts to each channel. The receiver provides plenty of processing and a host of Yamaha features.
With powerful and varied sound processing, the RX-V430 provides Dolby Digital, Dolby ProLogic II, and DTS Digital Surround decoding. Yamaha’s Quad-Field CINEMA DSP allows enjoyment of Dolby Digital EX and DTS-ES Matrix 6.1 sound formats in the Phantom mode (using 5.1 channels). The RX-V430 provides 21 surround programs and offers a total of 41 surround environment variations.
Yamaha’s proprietary ASIC LSI, the 32-bit YSS-938, assures top quality audio performance.
The RX-V430 has two audio-only inputs and one audio-only output. Including the audio portion of A/V source inputs, the receiver provides 1 optical and 1 coaxial digital input.
When a source is selected, the receiver automatically chooses the best quality input connected – digital audio rather than analog audio, etc. The receiver also makes the same automatic selection for decoding, down the hierarchy from discrete multi-channel, to matrix, and then stereo.
Building on technology incorporated into its world famous “silent” musical instruments, Yamaha has added HRTF and “Virtual” technology to create a realistic surround movie effect using standard, two-channel headphones.
The RX-V430’s rear panel has input jacks to accommodate an external decoder. The receiver is ready for any other 5.1 multi-channel format, should one be developed.
Yamaha’s famed low impedance drive circuitry is included in this receiver so that it can handle virtually all loads and a wide variety of speakers. For further speaker matching, the amplifier can be set for either 4- or 8-ohm speakers.
The new receiver provides a subwoofer pre-out so that the low frequency signals can go directly to your powered subwoofer.
The advantage of full range, 20 to 20,000 Hz, damping is that it improves the definition and resolution of the sound output throughout the audible frequency range.
Permits a delayed receiver turn off. It can be set for up to two hours in 30 minute increments.
Up to 40 preset AM and FM stations can be grouped in five groups of eight stations. These groupings make it easy for family members to easily access their favorite stations or to have musical genres, such as all the jazz stations, grouped together.
Includes Pre-programmed Universal Remote, and soft copy of manual in PDF. Asking just $125 for this well equipped budget Yamaha AVR, fully tested and working well.
| Weight | 23 lbs |
|---|---|
| Dimensions | 16.2 × 21.1 × 9.9 in |
You may also like…
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Related Products
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
JVC RX-664V A/V Receiver — 100W x 5, Phono, SEA EQ, Sub Out
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.














