Denon DRA-435R Stereo Receiver 55 WPC w/ Phono — Japan

Denon DRA-435R Stereo Receiver 55 WPC w/ Phono — Japan, With Remote

A refined, Japanese-made stereo receiver from Denon’s early 1990s lineup, delivering 55 watts per channel of clean power with a full complement of analog inputs including a moving magnet phono stage. Made in Japan.

The DRA-435R exemplifies Denon’s Design Integrity philosophy — even in their mid-range receivers, sound quality came first. Manufactured by Nippon Columbia Co., Ltd. from 1991 to 1993, this receiver delivers 55 watts per channel into 8 ohms with just 0.05% total harmonic distortion, and frequency response extends from 20 Hz to an impressive 50 kHz. AudioKarma enthusiasts note that these early 1990s Denon receivers consistently deliver more power than their specifications suggest — a hallmark of conservative Denon engineering.

The quartz-synthesized AM/FM tuner provides stable, drift-free reception with excellent FM sensitivity at 0.8 µV. Analog inputs cover Phono (MM, 2.5 mV / 47 kohm), CD, Video, Tape-1, and Tape-2/VCR, with tape recording outputs for both tape loops. The tape monitor loops can serve as insert points for an external equalizer or signal processor. A preamplifier output allows connection of an external power amplifier for system expansion. Composite video switching is provided via dedicated monitor, video, and VCR inputs and outputs.

The moving magnet phono stage offers 2.5 mV sensitivity with 47 kohm input impedance and a 78 dB signal-to-noise ratio — a capable, quiet phono section for vinyl playback. Line-level signal-to-noise ratio is an excellent 95 dB.

Dual speaker outputs with front-panel A/B switching allow two pairs of speakers to be connected, with impedance ratings of 6-16 ohms per speaker for A or B individually, or 12-16 ohms when both pairs are driven simultaneously. One switched AC outlet (120W/1A max) and one unswitched outlet (240W) on the rear panel provide convenient power for ancillary components.

The front panel features Denon’s signature rotary controls for volume, bass, treble, and balance — tactile, smooth, and satisfying to use. The compact chassis at just 120mm tall fits easily into tight shelf spaces.

Includes the original Denon remote control for full wireless operation of all primary functions.

Specifications:

Power output: 55 watts per channel into 8 ohms (stereo)

Total harmonic distortion: 0.05%

Power bandwidth: 10 Hz – 40 kHz (8 ohms, 0.05%)

Frequency response: 20 Hz – 50 kHz

Input sensitivity: 2.5 mV (MM phono), 150 mV (line)

Input impedance: 47 kohm (phono), 29 kohm (line)

Maximum phono input level: 120 mV (MM)

Signal-to-noise ratio: 78 dB (MM phono), 95 dB (line)

Preamplifier output

Tuning range: FM 87.5 – 108 MHz, MW 522 – 1611 kHz

FM usable sensitivity: 0.8 µV (75 ohm, IHF)

Inputs: Phono (MM), CD, Video, Tape-1, Tape-2/VCR

Tape recording outputs (both loops)

Composite video switching (monitor, video, VCR)

Speaker outputs: A and B (6-16 ohms each; 12-16 ohms A+B)

Tone controls: bass (100 Hz, ±10 dB), treble (10 kHz, ±10 dB)

AC outlets: 1 switched (120W/1A max), 1 unswitched (240W)

Remote control included (original Denon)

No digital inputs or outputs

Power consumption: 2.6A / 120V, 60 Hz

Dimensions: (Width x Height x Depth) 17.1 x 4.7 x 12.3 inches (434 x 120 x 312 mm)

Weight: 14.8 lbs (6.7 kg)

A well-built, Japanese-made Denon stereo receiver with clean power, a capable phono stage, dual speaker outputs, and the kind of straightforward analog design that continues to reward listeners decades after production. Complete with original remote. Made in Japan.

Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence