banana plugs
Showing 13–17 of 17 resultsSorted by price: high to low
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
Linn K20 Speaker Wire Extension Cables, 4 m Pair – 11 AWG
A matched pair of Linn K20 speaker wire extension cables, four metres each: banana plugs one end, insulated 4 mm sockets the other, no cutting or splicing.
✔️ 4 sq mm copper cores, about 11 AWG
✔️ Very good condition
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Radique House Quad Speaker Cables, 10 ft Pair – Banana Ends
Twice the copper, out of sight: a 10 ft pair of four-conductor oxygen-free copper speaker cable, banana plugs at both ends.
- Four 14 AWG OFC conductors, doubled to 11 AWG per leg
- Discreet white jacket printed CM/CL2
- Gold-plated Radique Audio banana plugs
- Bi-wire capable to order; hand-assembled in our shop
- 1-year warranty
Radique Audio Banana Plugs – Gold-Plated, Dual Set Screws
Banana plugs that stay put: gold-plated, with two set screws holding the wire instead of one.
- Six-leaf gold-plated springs for a tight fit in the binding post
- Full-length non-conductive jackets, colour-coded red and black
- Fits 12 to 18 AWG speaker wire; 19.4 g a pair
- Packs of 1, 2, 4, 5, 7 or 14 pairs
- 1-year warranty
Quality Pair of Canare 4S8 3.5′ Speaker Cables, Bi-Wired
Canare's 4S8 star-quad cable — four 16 AWG conductors set the same distance from centre so their magnetic fields cancel, which keeps EMI off adjacent low-level lines. Combined, that works out to 13 AWG a leg. Three and a half feet a side, bi-wired: one pair of Radique Audio gold-plated bananas at the amplifier end, two pairs at the speaker end.
Radique House CCA Speaker Cables – Banana to Pin, 7 or 25 ft
Banana to pin, 7 or 25 feet: a pair in our red and black House CCA, 7 ft in stock or 25 ft built to order.
- Gold-plated banana plugs to flexible gold-plated pins
- Dual set screws and colour-coded jackets at both ends
- Colour-matched heat-shrink at every joint
- Any combination of ends on request
- 1-year warranty
Pair of 6′ Canare 4S8 13 AWG Speaker Cables (B/S)
Canare's 4S8 in a four-conductor star-quad geometry — every conductor the same distance from the centre, so the opposing magnetic fields cancel and the cable radiates far less interference into whatever runs beside it. 13 AWG, low capacitance and resistance, and flexible even below freezing. Terminated here with our own banana plugs at one end and spade connectors at the other.
Quality Pair of Canare 4S8 3.5′ Speaker Cables, Banana – Spade
Canare's 4S8 star quad, four 16 AWG conductors wired as a 13 AWG pair — the geometry puts every conductor the same distance from centre, so the opposing magnetic fields cancel. Terminated here by hand: Radique Audio gold-plated bananas at one end, gold-plated spades at the other. Three and a half feet, sold as a pair.
Radique House CCA Cables, 10 ft Pair – Banana to Small Spade
For vintage posts too small for spades: a 10 ft House CCA pair, banana plugs to small spades.
- Radique Audio banana plugs to small spades (forks) for #10 / M5 posts
- Small spades crimped and double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
4′ 14 AWG Monster XP Cables w/ Spades & Banana Plugs
A pair of four-foot runs of 14 AWG Monster XP speaker wire, terminated at both ends: Radique Audio banana plugs at one end, Radique Audio spade connectors at the other. Four feet is a short run — amplifier and speakers sitting close together, with nothing to strip and nothing left over. Eighty-five dollars for the set.






































