Denon 595 Watt 7.1 AVR w/ 2nd Zone AVR-1906
$175.00
Eighty-five watts to each of seven channels at 0.08% distortion, through 192 kHz/24-bit DACs. The second zone is powered rather than line-level only, so someone can run stereo in another room while the main system stays in 5.1. Component video conversion sends every source to the TV on one cable. Three optical and two coaxial digital inputs, 5.1 preamp in, 7.1 preamp out.
1 in stock
The AVR-1906 not only delivers great home theater sound, but also offers plenty of convenience features that make your entertainment system easy to use and enjoy. Denon’s acclaimed high-current amplification drives up to 7 home theater speakers with power and precision. And thanks to a wealth of built-in surround decoding options, you can enjoy high-impact surround sound from virtually all of your movies, music, TV shows, and video games.
Component video conversion provides easier TV hookup and simpler switching between sources. All video signals can be passed from the ‘1906 to your TV via a single component video connection. That means you can switch from your cable box to your DVD player with the press of a single button on this receiver’s remote — no more fumbling through input menus on your TV. Component video conversion also preserves the highest possible picture quality for each source.
An icon-based display appears on your TV screen, providing easy navigation of the ‘1906’s control menus. And dual-room/dual-source capability lets you enjoy home theater in your main room while a housemate listens to music in another room — this receiver can even power stereo speakers in your second room.
85 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD
Dolby® Digital EX, DTS-ES®, DTS 96/24, Dolby Pro Logic® IIx, and DTS Neo:6 processing
192kHz/24-bit DACs
dual-room/dual-source output (powered and fixed line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room)
component video conversion
on-screen display
digital inputs: 3 optical (including one front-panel), 2 coaxial
optical digital output
component video switching: 3 in, 1 out (100MHz bandwidth)
3 audio and 4 audio/video (including 3 S-video and one front-panel) inputs
5.1-channel preamp input for connecting an Super Audio CD (SACD) or DVD-Audio player
7.1-channel preamp output for system expansion
High-current, low-impedance amplifier design
56 AM/FM presets
2 sets of main speaker outputs
Dimensions: 17-1/8″W x 5-3/4″H x 17-5/16″D
Asking just $175 for this great sounding 7.1 AVR from Denon with handy powered second zone output.
| Weight | 26 lbs |
|---|---|
| Dimensions | 21.4 × 21.1 × 9.75 in |
You may also like…
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Related Products
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
Onkyo TX-NR737 770W 7.2 Atmos 4K Wi-Fi Bluetooth THX AVR
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
