JVC 500 Watt 5.1 AVR RX-6042
$125.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Give your next receiver Bluetooth. RA-Twin II, $39.00 →
Other AV receivers we have in stock now
3 in stock · $125.00 · all ship
JVC RX-5032V 5.1 AV Receiver, 100W/Ch, Optical & Coax In$125.00Ships
Yamaha 400 Watt 5.1 AVR 5 Digital Inputs, Remote RX-V520$125.00Ships
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical$125.00Ships
Give your next receiver Bluetooth.
The RA-Twin II adds Bluetooth streaming to any vintage receiver or amp with a spare input. Phone to stereo in about a minute, and nothing on the receiver is modified.
RA-Twin II, $39.00 →VC 500 Watt 5.1 AVR in excellent condition. Features full set of 5.1 Pre-inputs, 3 digital inputs. Great choice for budget Home theater system with decent power.
Features:
100 watts x 2 min. RMS, both channels driven into 8 ohms from 40Hz to 20kHz with no more than 0.8% THD 100 watts x 5 min. RMS, into 8 ohms, 1kHz, 0.8% THD
5.1 channel pre in/DVD Multi-Channel audio compatible
High-Performance Motorola 160-MIPS 24/48-bit DSP
DSP Digital Equalizer
Dolby Digital, dts, and dts 96/24 decoders built-in for theater quality surround from digital sources Dolby Pro Logic II in Full Digital Processing
Fully Discrete Outputs to ensure greater fidelity and longer life
Digital Acoustics Processor (DAP): 7 presets for Multi-Channel Digital Sources (Theater 1, Theater 2, Hall 1, Hall 2, Dance Club, Live Club, Pavillion) 9 presets for 2-Channel sources (Mono Film, Theater 1, Theater 2, Hall 1, Hall 2, Dance Club, Live Club, Pavilion, All CH Stereo)
3D-Phonic
A/V COMPU LINK Enhanced COMPU LINK Control System Fluorescent Display with Dimmer
Sub-woofer Preout
2 Component Inputs, 2 S-video Inputs, 2 Composite Video Inputs 1 Component Outputs, 2 S-Video Outputs, 2 Composite Outputs 3 Assignable Digital Inputs (2 Optical, 1 Coaxial) that you can designate to any digital source
Screw-type speaker terminals (Suitable for banana plugs): Front L/R, Center, Surround L/R
15 AM and 30 FM station memory
Dimensions: Width: 17 3/16″, Height: 5 13/16″, Depth: 16 1/8″, Weight: 19.5 lbs
With JVC remote and soft copy of manual in PDF. Asking just $125.
| Weight | 23 lbs |
|---|---|
| Dimensions | 20.1 × 21.25 × 10 in |
Related Products
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
Onkyo TX-NR737 770W 7.2 Atmos 4K Wi-Fi Bluetooth THX AVR
