Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
$195.00
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
1 in stock
Kenwood KR-A4070 — 60 Watts, Proper Phono Stage, Original Remote
A clean, straightforward mid-1990s Kenwood stereo receiver delivering 60 watts per channel, well suited as the reliable heart of a vinyl-and-tuner system or a simple second setup.
Specifications and Features
The KR-A4070 comes from Kenwood’s long tradition of honest, well-sorted receivers: 60 watts per channel into 8 ohms across the full 20Hz–20kHz bandwidth at just 0.01% total harmonic distortion. A built-in MM phono input welcomes a turntable directly, the tape monitor loop handles recording or an outboard equalizer, and separate bass, treble, and balance controls give real hands-on adjustment that modern minimalist gear has abandoned. The original Kenwood remote control is included — a convenience surprisingly rare among surviving receivers of this era.
Level 1 Service
This unit has undergone our <a href=”https://radique.com/service-levels/”>Level 1 service</a> and testing, which should ensure many more years of reliable performance ahead.
Condition
Cosmetically graded Good, this unit shows honest signs of regular use consistent with its age, and presents respectably on a shelf or in a rack.
A serviced, remote-equipped Kenwood with a proper phono stage — an easy, dependable way into vinyl or a solid foundation for an everyday music system.
Kenwood KR-A4070 Specifications
- Power output: 60 watts per channel into 8 ohms
- Frequency response: 20Hz to 20kHz
- Total harmonic distortion: 0.01%
- MM phono input (2.5mV sensitivity)
- Tape monitor loop for recording or external EQ use
- Separate bass, treble, and balance controls
- AM/FM tuner with preset memory
- Original Kenwood remote control included
- Dimensions: (Width x Height x Depth) 17.3 x 5.2 x 13.8 inches (440 x 133 x 350 mm)
- Weight: 14.8 lbs (6.7 kg)
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 16.8 lbs |
|---|---|
| Dimensions | 17.8 × 21.3 × 9.2 in |
You may also like…
Gold Plated Pin Connectors – Flexible Pins, Radique Audio
Made for spring clips and guillotine terminals, where bare wire frays and works loose. The pin flexes rather than sitting rigid, so it does not lever on a forty-year-old terminal, and two set screws hold the wire instead of one. Takes 12 to 18 AWG — 12 is a tight fit. Colour-coded non-conductive jackets and a textured grip. Sold in 1, 2, 4 or 10 pairs.
Related Products
Luxman R-117 Flagship Stereo Receiver — 160 WPC, MM & MC Phono
Aurex (Toshiba) SA-5000 Stereo Receiver — 50 WPC, Made in Japan
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
