Rotel RC-1550 Stereo Preamplifier – Silver, Remote, MM Phono
$595.00
A modern-era Rotel preamplifier in silver, with its remote, built around a proper power supply.
✔️ Condition: Very Good — silver facia clean, presents beautifully
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
1 in stock
A modern-era Rotel preamplifier in silver, with its remote, built around a proper power supply.
What it is
The RC-1550 belongs to Rotel’s 15 series, made between 2009 and 2013 — which makes it a genuinely modern component rather than a vintage one. There are no forty-year-old capacitors in it, and it was designed in an era when a preamplifier was expected to handle a phono cartridge and a streamer with equal composure.
What separates it from the crowd of budget preamplifiers it competed against is where Rotel spent the money: the power supply. It uses a custom toroidal transformer wound to Rotel’s own specification, feeding British-made BHC slit-foil capacitors. Slit-foil is not a cosmetic choice. The foil is scored to interrupt eddy currents in the plates, which lowers the capacitor’s own inductance and lets it deliver current more cleanly on demand. In a preamplifier, where the signal is small and the noise floor is everything, the quality of the supply is most of the design.
What you get
Six line-level inputs plus a moving-magnet phono stage, so a turntable connects directly with no external stage required.
Two independent sets of main outputs — which is more useful than it sounds. Run a power amplifier from one and a powered subwoofer from the other, or feed a second amplifier in another room, without splitters or compromise.
There is a contour control for tailoring the tonal balance when a recording or a room needs it, and a 12-volt trigger output for switching a power amplifier on and off with the preamplifier rather than reaching behind the rack.
The remote is included. On this model that matters — it is how the input selection and volume are driven from the listening position, and a preamplifier without its remote is a preamplifier you have to get up for.
Condition
Very good. A genuinely handsome piece — the silver facia is clean and the unit presents beautifully.
A serious modern preamplifier, in the better-looking finish, with the remote still in the box.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
Rotel RC-1550 Specifications
- Type: stereo preamplifier
- Inputs: six line level, plus moving-magnet phono
- Outputs: two independent sets of main outputs
- Power supply: custom toroidal transformer, BHC slit-foil capacitors
- Controls: volume, input selection, contour
- Trigger: 12 V output
- Remote: included, Rotel system remote
- Finish: silver
- Made between 2009 and 2013
- Dimensions: (Width x Height x Depth) 17 x 3.9 x 13.3 inches (431 x 99 x 337 mm)
- Weight: 15.9 lbs (7.2 kg)
🎚️ Gold Series RCA Interconnects
Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 17.9 lbs |
|---|---|
| Dimensions | 17.3 × 21 × 7.9 in |
Rotel began in Tokyo in the late 1950s, founded by Tomoki Tachikawa, and the Rotel name dates from 1961. The Tachikawa family still owns it, and Kevro International of Pickering, Ontario, distributes it in Canada. We carry Rotel power amplifiers, preamplifiers, integrated amps, CD players and AV receivers and processors. We've had nearly 50 Rotel listings so far, covering about 40 different models. Every used Rotel here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
The Rotel models we've sold most often include the RSP-1068 surround processor, the RMB-1075 five-channel amplifier and the RTC-965 tuner-preamplifier.
The Rotel story
Tomoki Tachikawa started the company in Tokyo in the late 1950s. Rotel says it first distributed Sylvania televisions in Japan, then reorganized in 1961, left the TV business and went on to design and build electronics for other brands. The Rotel name dates from 1961.
Value hi-fi. Rotel says it refocused in 1979 on no-frills components that put musical accuracy and build quality ahead of features. Its RA-820 integrated amplifiers of the early 1980s were developed with engineers in England, and Rotel says the RA-820B won its first What Hi-Fi? Product of the Year in 1982.
B&W and home theatre. Rotel's partnership with Bowers & Wilkins began in 1981, and the two later shared manufacturing in Zhuhai, China. Rotel added surround processors and receivers in the 1990s and its first DVD player in 2000.
Today. Production moved from Japan to Taiwan and then to China, where Rotel builds in its own factory in Zhuhai. The family relaunched its high-end Michi line in 2019, and Peter Kao, a third-generation member of the family, runs the company. Kevro International, which first carried Rotel in Canada in 1984, has been its Canadian distributor again since 2019.
Which Rotel is which?
1970s receivers: the RX series, such as the RX-402 and the RX-603 to RX-1603, with matching RT tuners.
BX separates and integrated amps (1980s to 1990s): the RA-820 family, the RTC-850 tuner-preamplifier (1988 to 1991) and the RB-960BX to RB-990BX power amps of the 1990s.
Home theatre (1990s to 2000s): the RSX-965 surround receiver, the RTC-965 tuner-preamplifier (1999 to 2000), the RSP-1066 and RSP-1068 processors, the RMB-1075 five-channel amp (2001) and the RDV-995 DVD player.
The 10 and 15 Series: stereo power amps such as the RB-1070 and RB-1080, the RCC-1055 CD changer, and the 15 Series of 2009, including the RC-1550 preamp and RB-1552 power amp.
Diamond Series and Michi (2019 on): today's flagships, such as the RA-6000 integrated amplifier.
Buying used Rotel: what to check
Processors stuck in standby. Owners report RSP-1066 and RSP-1068 processors that show the red standby light but won't wake. Both rear software-update switches must be off, and a factory reset fixes some.
Power amps. The RB-1070 and RB-1080 have no output relays, so some make a noise a few seconds after switching off: turn the volume down first. Owners also report early RB-1080s blowing a left-channel fuse, which Rotel fixed in production.
Protection lights and loads. On the RMB-1075, check that no protection light stays on, and use speakers of 4 ohms or more. The RB-960BX needs 8 ohms or more when bridged.
Digital inputs. If DTS sounds harsh through an RSX-965, check that the player is sending a raw bitstream before blaming the receiver.
Trays. Cycle the tray several times, and on the RCC-1055 every disc position. A worn tray belt makes it slow or noisy.
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
You may also like…
Marantz 3800 Audiophile Preamp – Made in USA
- ✔️ Marantz Model 3800 preamplifier — precision built in the USA, 1976–78
- ✔️ 5Hz–60kHz, THD 0.25%, S/N 100dB line and 82dB MM phono
- ✔️ Built-in Dolby encoder/decoder with calibration metering and 400Hz tone generator
- ✔️ Independent L/R bass, mid and treble sliders, turnover selectors, three filters, tone defeat
- ✔️ Dual preamp outputs for bi-amping · four switched AC outlets · Level 1 serviced
Rotel RC-870 Preamplifier – MM/MC Phono, Made in Japan, 1985
Rotel called this a stereo control amplifier rather than a preamp, and it earns the name — no tone controls, no filters, no loudness, just four line inputs and two tape loops with dubbing either way. The phono stage runs moving magnet and moving coil through separate buffers, and line distortion is no greater than 0.004%. Stamped Tokyo, Japan on the rear panel. Excellent cosmetic condition.
Rotel RB-870 Stereo Power Amplifier – 60 WPC, Bridgeable
Sixty watts a channel into 8 ohms at 0.03% distortion, a damping factor of 280, and response running out to 120kHz. A rear-panel switch bridges the two channels into a single 120-watt mono amplifier, so a second one later gives you monoblocks. The speaker terminals clamp bare wire or spades only — no bananas. Very good condition, inspected and tested.
Sony TAE-20FB Falcon Preamplifier — Bronze, MM/MC Phono, Japan
The control amplifier from Sony's short-lived Falcon range — made in Japan for barely two years and rarely seen on this side of the Pacific. Bronze-anodised aluminium case, a real moving-coil phono input alongside moving-magnet, and a signal path that has been freshly recapped. A couple of light marks on the casework, otherwise Very Good. Ships from Kanata, ON.
IsoAcoustics ISO-PUCK Mini Isolators (Pack of 8)
- ✔️ Genuine IsoAcoustics ISO-PUCK Mini isolators, brand new in box
- ✔️ 8-pack for lighter speakers, studio monitors, turntables, mixers, and similar gear
- ✔️ Each puck measures 1.7” x 0.9” and supports up to 6 lbs (2.75 kg)
- ✔️ Use 3 or more per item depending on weight to reduce vibration transfer and improve clarity
- ✔️ Backed by a 2-year manufacturer’s warranty in Canada
Radique Audio Gold Series Subwoofer Cable – 2 to 10 m
A quiet run to your subwoofer: dual-shielded, in 2, 3, 5 or 10 m.
- Six-layer construction; foil and 128-strand braided copper shields
- Dual degaussing rings against magnetic interference
- Slim gold-plated RCA plugs for crowded panels
- 7 mm gold cotton mesh jacket
- 1-year warranty
Radique Audio Gold Series RCA Stereo Interconnect Cable
RCA cables that are kind to vintage jacks: dual RCA to dual RCA, in 0.2, 0.75 or 1.5 m.
- Slim gold-plated plugs with vintage-safe grip pressure
- Dual shielding: aluminum foil and 128-strand braided copper
- Reinforced splitters; 7 mm gold cotton and nylon mesh jacket
- Three lengths, chosen above the Add to Cart button
- 1-year warranty
Related Products
- ✔️ Marantz Model 3800 preamplifier — precision built in the USA, 1976–78
- ✔️ 5Hz–60kHz, THD 0.25%, S/N 100dB line and 82dB MM phono
- ✔️ Built-in Dolby encoder/decoder with calibration metering and 400Hz tone generator
- ✔️ Independent L/R bass, mid and treble sliders, turnover selectors, three filters, tone defeat
- ✔️ Dual preamp outputs for bi-amping · four switched AC outlets · Level 1 serviced
Sony TAE-20FB Falcon Preamplifier — Bronze, MM/MC Phono, Japan
The control amplifier from Sony's short-lived Falcon range — made in Japan for barely two years and rarely seen on this side of the Pacific. Bronze-anodised aluminium case, a real moving-coil phono input alongside moving-magnet, and a signal path that has been freshly recapped. A couple of light marks on the casework, otherwise Very Good. Ships from Kanata, ON.
Marantz 3800 Audiophile Preamp – Made in USA
Rotel RC-870 Preamplifier – MM/MC Phono, Made in Japan, 1985
Rotel called this a stereo control amplifier rather than a preamp, and it earns the name — no tone controls, no filters, no loudness, just four line inputs and two tape loops with dubbing either way. The phono stage runs moving magnet and moving coil through separate buffers, and line distortion is no greater than 0.004%. Stamped Tokyo, Japan on the rear panel. Excellent cosmetic condition.
Jadis Defy DP-60 Tube Preamplifier — MM/MC Phono, Outboard PSU
A full-function valve preamplifier — line stage and a moving-magnet/moving-coil phono section, valves throughout, with the power supply in its own separate chassis. Hand-built in the south of France, in excellent condition, and it comes with the original factory cartons including the shaped foam box for the supply.
