Totem Mite-T-Center Centre Channel — Black Ash | Canada

$395.00

Two 5.5-inch long-throw woofers flanking a 1-inch soft dome tweeter in a lock-mitred cabinet, 46 Hz to 20 kHz at 88 dB sensitivity. Totem supplies it with no grille by design, and the 4-way posts take bi-wiring. Black ash real wood veneer, built in Canada. Very good condition.

Out of stock

Other center channels in stock now

This one has sold. Want first dibs on the next one?

We take these in regularly. Leave your name and email, and we’ll email you the moment one is listed, so you hear first. No cost, no obligation.

Email me when one is listed

How First Dibs works →

Whatever you end up with, it needs cable. Build a set to length →

Read the full listing and see all 3 photos ↓

Other center channels we have in stock now

3 in stock · $445.00–$1,095.00 · all ship

Custom-built Radique Audio speaker cables with gold-plated banana plug, spade, and pin connector terminations

Whatever you end up with, it needs cable.

We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.

Build a set to length →
Description

Totem Mite-T-Center Centre Channel — Black Ash | Canada

Made in Canada, the Totem Acoustic Mite-T-Center is a properly high-end Canadian-built centre channel — small in stature, but engineered to the same exacting standards as Totem’s renowned Mite bookshelf monitors and Sttaf slim floorstanders, and offered here in very good condition in the clean, furniture-friendly black ash finish.

Totem Acoustic, founded by Vince Bruzzese in Montreal in 1987, has built its reputation on punching dramatically above weight — extracting full-range, three-dimensional sound from compact, beautifully finished cabinets. The Mite-T-Center is the dedicated horizontal centre channel built to timbre-match both the Mite bookshelf monitors and the Sttaf slim floorstanders, and shares their key engineering signatures: a hand-crafted, lock-mitred cabinet, borosilicate internal damping, real wood veneer finish, and Totem’s preference for high-quality, conservatively rated drivers in well-tuned smaller enclosures.

A note on naming: Totem’s official spelling for this model is “Mite-T-Center,” but it is widely referred to in the secondhand market and online forums as the Mite-T Center, Mite T Center, Mite-T C, Mite-T-C, Mite-T Centre, Mite TC, and Mite T-C. All of these refer to the same Totem centre channel — the model documented on Totem’s official Mite-T-Center specification sheet.

Driver complement is a true MTM (midwoofer-tweeter-midwoofer) configuration, with two long-throw 5.5-inch woofers flanking a 1-inch soft dome tweeter. Crossover and cabinet voicing are tuned for clear, intelligible dialogue at all listening levels, seamless tonal blending with Mite or Sttaf mains across the front stage, and the kind of rich midrange weight that gives film soundtracks and concert recordings real presence. The bass is rated to 46 Hz (±3 dB) — genuinely impressive for a centre this compact — and the 88 dB sensitivity makes it an easy match for AV receivers and integrated amplifiers from 20 watts upward.

The Mite-T-Center is intentionally supplied without a grille — Totem’s design philosophy is that a properly engineered baffle should not be acoustically compromised by one, and the result is a clean, modernist appearance that shows off the woven cone woofers and soft dome tweeter beautifully against the black ash finish. The cabinet is bi-wireable via 4-way binding posts, allowing experimentation with bi-wiring or bi-amping for owners who wish to.

Official model: Totem Acoustic Mite-T-Center (also known as Mite-T Center, Mite T Center, Mite-T C, Mite-T-C, Mite-T Centre, Mite TC, Mite T-C)

Design: 2-way MTM centre channel, lock-mitred cabinet, borosilicate damping

Drivers: 2 × 5.5 in. (140 mm) long-throw woofer; 1 × 1 in. (25 mm) soft dome tweeter

Frequency response: 46 Hz – 20 kHz (±3 dB)

Sensitivity: 88 dB / W / m

Nominal impedance: 4 ohms

Recommended amplifier power: 20–100 W

Maximum SPL: 105 dB before dynamic compression

Speaker terminals: 4-way bi-wireable binding posts

Internal volume: 11.2 L

Finish: Black ash real wood veneer

Grille: None (by design)

Country of manufacture: Canada

Dimensions: (Width x Height x Depth) 20.6 x 6.1 x 8.4 inches (523 x 155 x 213 mm)
Weight: 17 lbs (8 kg)

A genuine high-end Canadian-built centre channel from one of the most respected names in audiophile loudspeakers — properly engineered, beautifully finished in black ash, and an outstanding partner for Totem Mite bookshelves or Sttaf floorstanders, or as a standalone upgrade for any quality 5.1 or 5.2 system.

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program, you can purchase with confidence.

Additional information
Weight19 lbs
Dimensions12.4 × 24.6 × 10.1 in
About brand
Totem at Radique
We service Totem, too. Bring us your own Totem speakers and subwoofers for repair, servicing or restoration (speakers up to 80 lbs each), with a 90-day warranty on the work. See our Audio Service page

Totem Acoustic was founded in Montreal in 1987 by designer Vince Bruzzese, and its first speaker, the Model 1 mini-monitor, made its debut at the 1989 Toronto hi-fi show. We carry Totem towers, bookshelf speakers, on-wall and surround speakers, centre channels and subwoofers. We've had more than 60 Totem listings so far. Every used Totem here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our best-selling Totem models so far: the Tribe I on-wall speaker, followed by the Dreamcatcher and the Sttaf tower.

The Totem story

Vince Bruzzese founded Totem Acoustic in Montreal in 1987, by the company's own count. Stereophile says it burst onto the high-end scene at the 1989 Toronto show with the Model 1, a small two-way mini-monitor.

Small speakers, big reviews. Stereophile reviewed the Model 1 in the early 1990s, then the Mani-2, Tabù, Signature Model 1 and Forest. In 2009 it noted that the Model One had been in continuous production since the end of the 1980s.

Home theatre. Totem added the compact Mite and Mite-T by 1998, and later the Dreamcatcher system. Stereophile describes Totem as a Canadian manufacturer, and the company is based in Montreal.

Which Totem is which?

Model 1 family (from 1989): the Model 1, Signature Model 1 and Model One.

Mani-2: a two-way stand-mount with two woofers mounted magnet to magnet, one of them inside the cabinet, and later the Mani-2 Signature (2009).

Mite and Mite-T (by 1998): compact two-ways.

Forest (by 2001): a floorstander about three feet tall, whose lower cabinet can be filled with sand.

Other models we've handled: the Arro and Sttaf towers, the Tribe on-wall speakers, the Dreamcatcher and the Storm subwoofer.