Yamaha RX-V4A 5.2 AVR 400W 8K eARC Wi‑Fi BT
$495.00
Out of stock
Email when stock available
Yamaha RX-V4A 5.2 AVR 400W 8K eARC Wi‑Fi BT
This Yamaha RX-V4A is a modern 5.2-channel home theatre receiver delivering 80 watts per channel into 6 ohms (2 channels driven, 20–20,000 Hz) for clear, dynamic surround sound in small to medium rooms, complete with the original Yamaha remote control, printed quick start guide, calibration MIC, and antennas.
The RX-V4A supports 8K/60 and 4K/120 video on its HDMI inputs (via firmware update where applicable), along with HDR10, HDR10+, HLG, and Dolby Vision, making it well-suited for current TVs, game consoles, and streaming devices. It features four HDMI inputs and one HDMI output with eARC, so it can receive lossless surround formats from compatible TVs and act as the central hub for all video sources. Yamaha’s Cinema DSP and 17 DSP programs provide flexible sound modes, and built-in MusicCast, Wi‑Fi, Bluetooth, AirPlay 2, and Spotify Connect make it easy to stream from phones, tablets, and networked sources throughout the home. This unit is in very good cosmetic condition with only light signs of careful use and comes with the original Yamaha remote control for full access to setup and day-to-day operation.
Specifications:
Channels: 5.2-channel AV receiver
Power output: 80 W per channel (6 ohms, 0.06% THD, 20–20,000 Hz, 2ch driven)
HDMI: 4 inputs / 1 output, supports 8K/60 and 4K/120 (compressed/uncompressed per firmware), HDR10/HDR10+/HLG/Dolby Vision, VRR, ALLM
HDMI features: ARC and eARC on HDMI output
Audio formats: Dolby TrueHD, DTS-HD Master Audio, plus Cinema DSP 3D with 17 DSP programs
Network/streaming: Wi‑Fi, MusicCast multiroom, AirPlay 2, Spotify Connect, Bluetooth (in/out)
Wireless surround: MusicCast Surround capable (can use MusicCast 20/50 as wireless rears)
Tuner: AM/FM tuner
Remote: Original Yamaha remote control included
Also included: Printed quick start guide, calibration MIC, and antennas
Dimensions: (Width x Height x Depth) 17.1 x 6.8 x 14.9 inches (434 x 173 x 378 mm)
Weight: 19.4 lbs (8.8 kg)
This RX-V4A is a feature-rich, current-generation Yamaha 5.2 AV receiver with 8K-ready HDMI, eARC, full streaming and MusicCast, and a solid 80 WPC amplifier section, making it a strong choice for an up-to-date, compact home theatre system in a small or medium room. Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 22 lbs |
|---|---|
| Dimensions | 23.9 × 21.1 × 10.8 in |
Related Products
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
JVC RX-664V A/V Receiver — 100W x 5, Phono, SEA EQ, Sub Out
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
