




Harman Kardon AVR7200 7.1 AVR 700W High-Current Monster, 60lb!
$495.00
Out of stock
Email when stock available
Harman Kardon AVR7200 7.1 AVR 700W High-Current Monster
This Harman Kardon AVR7200 is a flagship‑class 7.1-channel AV receiver delivering 115 watts per channel into 8 ohms (stereo) and 100 watts x 7 into 8 ohms for surround, using Harman’s high‑current, wide‑bandwidth design to drive demanding speakers with ease.
The AVR7200 offers full Dolby Digital EX, DTS‑ES, Dolby Pro Logic II, DTS Neo:6, and Harman’s own Logic 7 processing in both 5.1 and 7.1 modes, so it can create a wide, enveloping sound field from discrete multichannel sources and stereo material alike. It also includes MP3 decoding, EZSet automatic level setup, and flexible bass management that was considered unusually advanced for its era, making it a strong choice both for home theatre and for high‑quality stereo listening with plenty of headroom. This unit is in good overall cosmetic condition with honest wear consistent with careful use, and comes with a Harman Kardon branded (non‑original) remote control that has been tested and confirmed to operate all primary functions.
Specifications:
Channels: 7.1-channel surround receiver (front L/R, center, surround L/R, surround back L/R, subwoofer)
Power output (stereo): 115 watts per channel into 8 ohms (20–20,000 Hz, <0.07% THD)
Power output (surround): 100 watts per channel into 8 ohms for all seven main channels (20–20,000 Hz, <0.07% THD)
Frequency response: 10 Hz – 100 kHz (+0/–3 dB at 1 W)
Total harmonic distortion: 0.07% (rated output, 8 ohms)
Input sensitivity / impedance: 200 mV / 47 kΩ (line level)
Signal-to-noise ratio: 95 dB (IHF‑A, line)
Surround processing: Dolby Digital EX, DTS‑ES, Dolby Pro Logic II, DTS Neo:6, Logic 7 (5.1 and 7.1), Hall/Theater modes, 5/7‑channel stereo
Digital inputs: Coaxial and optical S/PDIF inputs (multiple)
Video connections: Component, S‑Video, and composite video switching (NTSC)
Multiroom: Two channels assignable to surround back or multiroom applications
Remote: Harman Kardon compatible remote control, tested and confirmed to operate all primary functions (non‑original)
Dimensions: (Width x Height x Depth) 17.3 x 7.6 x 20.5 inches (440 x 194 x 521 mm)
Weight: 59.1 lbs (26.9 kg)
This AVR7200 is a seriously powerful, high‑current Harman Kardon surround receiver—often described as a “monster” for both its weight and real‑world drive—making it a compelling option for enthusiasts who want a muscular 7.1 amplifier section, classic HK sound, and extensive surround processing at a fraction of the cost of modern separates. Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 63 lbs |
|---|---|
| Dimensions | 24.5 × 21.3 × 11.6 in |
Related Products
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.











