PSB Alpha S Surrounds Dispersive. Compact. Effective.
$245.00
Out of stock
Get first dibs on the next one
PSB Alpha S Surrounds Dispersive. Compact. Effective.
From PSB:
“Dispersive. Compact. Effective. At last, a dipolar surround speaker at an affordable price – the Alpha S. While many budget-minded speaker systems force tiny, direct-radiating speakers on consumers, the design team at PSB worked tirelessly to develop and offer a cost-minded surround speaker, so that our customers could enjoy the full benefits of high performance home theater.
The Alpha S uses the same basic design as Surround found in our higher-end series and creates a more pleasing listening environment by making smaller rooms seem larger through their controlled and incredibly wide dispersion. The Alpha S comes readily wall-mountable, for easy installation in any application.”
The Alpha S is a bipolar design that combines excellent diffusion with pinpoint placement of highly localized effects on surround channels. It is designed to be the primary surrounds in 5.1 home theatre systems and to be the additional rear surrounds in 7.1 surround systems.
Each Alpha S two-way speaker system has two baffle arrays aimed 90 degrees apart from each other, and each baffle array has a 3/4-inch aluminum dome tweeter and a 3-1/2-inch polypropylene cone with rubber surround woofer.
Like the rest of the Alpha Series, the Alpha S employs advanced construction techniques and new high performance drivers to bring a new level of performance to a speaker family. All Alphas use the same new anodized aluminum dome tweeter that provides extended and smooth high frequency response. The entire Alpha Series is timbre-matched to ensure smooth, natural, coherent performance with other Alpha models in a system — be it Alpha Ts in the front with an Alpha C center and Alpha Ss in the rear, or Alpha Cs across the front and Alpha Ss in the rear. Add a SubZero or SubSonic 5 subwoofer to any combination and you have a truly high performance home theatre and stereo system at an amazingly affordable price.
According to PSB founder and Chief Designer Paul Barton, the new Alphas take an important next step for today’s audio and video customers. “”These speakers,”” he says, “”will make a big difference for buyers both of a pair of speakers for music systems and the multiple speaker systems needed for home theatre. And these new Alphas fit into rooms as nicely as they do into budgets.”
The Alpha S cabinet has both structural, injection-molded front baffles with metal perforated grilles mounted on a six-sided, vinyl veneered — black or white texture — MDF cabinet sleeve. The Alpha S can be mounted directly on a wall — using the integral keyhole wall mounting plate — or with other wall brackets or positioned on a speaker stand. It includes five-way, gold-plated binding posts to ensure quality connections.
Specifications:
FREQUENCY RANGE: On Axis @ 0º ± 3dB: 85-21,000Hz
Sensitivity: Typical Listening Room: 88dB
IMPEDANCE: Nominal: 8 Ohms, Minimum: 6 Ohms
Recommended Amplifier Power: 15-80 Watts
Dimensions: (W x H x D) 9¼” x 6 ¾” x 4¾”, 235mm x 171mm x 121mm, Weight: 4.9lb (2.2kg)/each
The Alpha S had a U.S. manufacturer’s suggested retail price of $399 per pair.
Asking just $245 for these impressive, compact Canadian dipoles in very good condition.
| Weight | 14 lbs |
|---|---|
| Dimensions | 15.5 × 13.25 × 10.75 in |
PSB began in the summer of 1972 in St. Jacobs, Ontario, where Paul Barton and two high-school friends started building speakers. The name stands for Paul and Sue Barton. PSB says every speaker it makes is voiced in the National Research Council's anechoic chambers here in Ottawa. We carry PSB towers, bookshelf speakers, centre channels and subwoofers. We've had more than 440 PSB listings so far, covering nearly 90 different models, second only to our other big Canadian brand, Paradigm. Every used PSB here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
Our five best-selling PSB models so far: the Alpha Intro LR bookshelf speakers, the Image 8C centre, the Image 4T towers, the Alpha SubZero i subwoofer and the Alpha B bookshelf speakers.
The PSB story, 1972 to today
Paul Barton founded PSB in St. Jacobs, Ontario, in the summer of 1972 with two high-school friends, and named it for himself and Sue Barton, his high-school sweetheart and now his wife. PSB stayed in St. Jacobs for about its first eight years.
The Ottawa connection. In 1973 or 1974 (sources differ) PSB's Beta II caught the attention of Dr. Floyd Toole at the National Research Council in Ottawa, and Barton has used the NRC's Ottawa facilities since 1974. PSB says every speaker it makes is still voiced in the NRC's anechoic chambers.
Lenbrook and Stratus. The Lenbrook Group of Pickering, Ontario bought PSB in the mid-1980s (PSB's own timeline says 1985), and PSB is now based in Pickering. The Stratus series began in the late 1980s, and Stereophile first reviewed the Stratus Gold in 1991.
Alpha, Image and beyond. The budget Alpha launched in 1991, and more than 50,000 pairs had sold by 2000. The Image series replaced the Century series in 1999, the Platinum flagship followed in 2002, then Synchrony in 2007 and Imagine in 2008. PSB marked its 50th anniversary in 2022 with the Passif 50.
Which PSB is which?
Early models (1970s and 1980s): the Beta II, Avanté II, Passif II and Project B2, then the R series after the Lenbrook purchase.
Stratus (late 1980s to the 2000s): the upper line, including the Mini, Silver, Gold and Gold i. The Gold is a three-way with a 10" woofer.
Alpha (1991 to today): the entry line, including the Alpha A/V, Alpha B, Alpha B1 and later the Alpha P5. Our best-selling Alpha Intro LR and Alpha B come from this family.
Image (1999 to the 2010s): one step above Alpha. Our best-selling Image 8C centre and Image 4T towers come from this family.
Platinum (2002), Synchrony (2007) and Imagine (2008): the higher lines of the 2000s.
SubSeries and SubZero: PSB's powered subwoofers, such as the Alpha SubZero i we sell often.
Buying used PSB: what to check
Where it was made. Lines launched from about 2008 onward, such as Imagine and later Image and Alpha models, were made in China. Check the label before calling an older PSB "made in Canada"; spec sheets from the 1990s list only the Pickering address.
Amplifier load. The Stratus Gold and Gold i have a 4-ohm nominal impedance, and owners say Stratus models want an amplifier with plenty of current.
Image tweeters. On Image series speakers, check that every tweeter works and sounds as bright as its partner. A dim or dead tweeter is a frequent point of failure on that line. We sell a new Peerless 1" replacement tweeter that drops straight in (Image 1B, 2B, 4T, 5T, 8C, 10S and more) and is more robust than the original, and we can install it while you wait.
Drivers. Owners report occasional woofer failures on older towers. Listen to each driver on its own.
Surrounds. Many PSB woofers, such as the Platinum T8's, use rubber surrounds rather than foam, but press gently on any woofer surround to check it.
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
You may also like…
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
Related Products
KEF HTS1001 Uni-Q Satellite Speakers Black Pair
KEF’s Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of a 3-inch mid-bass cone, so the pair behaves as a single source and the tonal balance holds across the room rather than in one chair. Sealed cast aluminium enclosures, 120 Hz to 22 kHz, 86 dB, magnetically shielded. Very good cosmetic condition.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite – Made in Canada
Both drivers fire upward into spoon-shaped reflectors Mirage calls OMNIGUIDEs, throwing sound through a full 360 degrees with a deliberate bias toward the front — which is what takes the sweet spot off a single chair. This is the original version at a genuine 7 lbs each, with a cast aluminium baffle and butyl rubber surrounds rather than foam. Built in Canada; condition very good.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
PSB VisionSound VS300 Aluminum On-Wall Speaker
An on-wall speaker engineered as one rather than adapted into one. It shares the tweeter, terminals and crossover of PSB's VS400 floorstander, but the port was moved to the front so the cabinet can sit flat to a wall without the wall changing what it does — and a rear switch selects NORMAL or ON-WALL, filling the 400 to 500 Hz dip that hard mounting creates. Extruded aluminium, built in Pickering, Ontario. Graded Excellent or Very Good; the only thing separating the two is a single Tic Tac-sized hole at the extreme edge of one grille frame.
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.
Monitor Audio Radius 250HD LCR Speaker – Gloss Black, Wall-Mount
A slim gloss black Monitor Audio speaker from the Radius HD range, in good condition, built to work as a left, center, right or rear speaker, standing upright, lying flat or hung on a wall.
✔️ Good condition — light scratches visible under bright light; grille included
✔️ One slim speaker for left, center, right or rear duty
✔️ Two rear keyhole slots; the matching wall bracket is listed separately
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Tannoy Arena Satellites, Pair – Dual Concentric, Four Finishes
Tannoy's die-cast aluminum Arena satellites, in very good condition, offered by the pair in four gloss finishes (white, gloss black, bronze and silver), with or without their matching cast bases.
✔️ Very good condition — the lacquered aluminum shells present well
✔️ Tannoy Dual Concentric drivers in cast aluminum, magnetically shielded
✔️ Four gloss finishes; matching cast bases on the silver, black and bronze pairs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Monitor Audio Radius 250HD LCR Speakers, Pair – Gloss Black
A matched pair of slim gloss black Monitor Audio speakers from the Radius HD range, in good condition, each built to work as a left, center, right or rear speaker, standing upright, lying flat or hung on a wall.
✔️ Good condition — light scratches visible under bright light; grilles included
✔️ Two slim speakers for a stereo pair, left and right of a center, or a set of rears
✔️ Two rear keyhole slots on each; the matching wall bracket is listed separately
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
KEF HTS1001 Uni-Q Satellite Speakers Black (Single)
KEF's Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of the 3-inch mid-bass, so dispersion stays even off-axis and the far seat hears what the middle seat does. Sealed cast aluminium cabinet in high-gloss black, magnetically shielded, 120 Hz to 22 kHz, 86 dB, 10 to 100 watts. Terminals take bare wire or pin connectors. Very good cosmetic condition.
