Onkyo TX-906 Stereo Receiver – 80 WPC, Dolby Pro Logic, 1990s
$138.00
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
✔️ Good condition — works as it should; the black cabinet and faceplate present well
✔️ Through our Level 1 service — cleaned, deoxidized, checked and thoroughly tested on our bench
✔️ Phono input for your turntable, plus CD and two tape inputs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
1 in stock
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
What it is
The TX-906 is one of those receivers owners still call a sleeper. It is rated at 80 watts per channel into 8 ohms, both channels driven from 20 Hz to 20 kHz at no more than 0.08% distortion. Onkyo’s Low Impedance Drive and discrete output stage let the main speaker outputs handle speakers down to 4 ohms, so it drives most bookshelf and floorstanding speakers comfortably, and its sound is clean and open through the mids and highs.
It was also one of Onkyo’s first steps into home theatre. Dolby Pro Logic decoding and a center mode are built in, with pre-outs for adding powered center and rear channels, so it can run a simple surround setup or stay a straightforward two-channel stereo receiver. A Source Direct button takes the tone controls out of the signal path for the cleanest route from your sources. There is a proper phono input for a turntable, inputs for CD, two tape decks and two video sources, and a quartz-synthesized AM/FM tuner with 40 presets.
One thing to know before you buy
The TX-906 was designed for Onkyo’s multi-room system, and its second pair of speaker terminals (the remote speakers) depends on the original remote control. They can be switched on through the Simul Source mode, but their volume can only be set from the remote. This unit does not come with its remote. Your main speakers work fully from the front panel, with nothing held back. If you want to use the remote speakers as a second zone, you would need to source an Onkyo remote for it.
The service it has had
Level 1 service, carried out on our bench:
Condition
Good. It works as it should, and the black cabinet and faceplate present well, as the photographs show, with the normal marks of a receiver in its thirties.
Plenty of clean power, a phono input, and an early taste of Onkyo home theatre, at a price that leaves room for good speakers.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
Onkyo TX-906 Specifications
- Cleaned inside and out
- Faceplate and knobs detailed
- Pots and switches cleaned and deoxidized
- Rear panel and RCA jacks cleaned
- Resistors, transistors and capacitors checked, and replaced where necessary
- Bias and DC offset checked and adjusted
- Lamps checked and replaced as required
- Thorough post-service testing
- Type: AM/FM stereo receiver with Dolby Pro Logic surround
- Service: Radique Level 1
- Power output: 80 watts per channel into 8 ohms, 20 Hz – 20 kHz, 0.08% THD, stereo
- Main speakers: 4 ohms minimum (Low Impedance Drive, discrete output stage)
- Surround: Dolby Pro Logic, center mode, delay time, center pre-out, rear pre-outs and rear speaker terminals (8 ohms minimum)
- Inputs: phono (MM), CD, tape 1, tape 2 (monitor), video 1, video 2
- Video: composite in/out and monitor out
- Controls: Source Direct, bass, treble, balance, input balance, rec out selector
- Speaker outputs: main pair and remote pair (5-way binding posts), rear pair
- Tuner: quartz-synthesized AM/FM, 40 presets, direct access tuning
- Remote: not included (see above)
- Power: 120 V, 60 Hz, 3.2 A
- Made in Malaysia by Onkyo, early 1990s
- Dimensions: (Width x Height x Depth) 17.9 x 5.9 x 13.1 inches (455 x 150 x 331.5 mm)
- Weight: 23.8 lbs (10.8 kg)
🎚️ Gold Series RCA Interconnects
Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉
🔌 Speaker Cable, Built on Our Own Bench
We hand-build speaker cable here in any length you need — pick the gauge and the terminations on our Custom Speaker Cable Builder. We also make our own gold-plated banana plugs, spades and pin connectors if you would rather terminate cable you already have. 👉
📶 Add Bluetooth — The RA-Twin II, Built For Exactly This
The TX-906 was built before Bluetooth reached home stereo, and it does not need replacing to get it. Our own RA-Twin II adapter plugs into the CD or tape input on the back and streams from a phone, tablet or laptop — nothing modified inside, and it comes with a starter cable so it works out of the box. If you want it done properly, the Gold Series RX Bundle pairs the adapter with our shielded Gold Series 3.5 mm to Dual RCA cable for less than buying the two separately. 👉
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 25.8 lbs |
|---|---|
| Dimensions | 17.1 × 21.9 × 9.9 in |
You may also like…
Gold Plated Banana Plugs by Radique Audio – Dual Set Screws
Dual set screws rather than a single screw or a compression sleeve, so the wire is held at two points and will not work loose behind the rack. Six-leaf gold-plated springs for a tighter grip in the binding post, full-length non-conductive jackets colour-coded for polarity, and gentle knurling that will not fray heavy cable. 19.4 g a pair, 25% heavier than the brand we used to carry. Fits 12 to 18 AWG.
RA-Twin II Gold Series RX Bundle
The RA-Twin II plus our shielded Gold Series 3.5 mm to dual RCA cable: stream from your phone to any vintage receiver, amplifier or powered speakers, for less than buying the two separately.
- RA-Twin II Bluetooth 5.4 adapter (RX, TX and Mobile modes)
- Gold Series 3.5 mm to dual RCA cable, shielded and gold-plated
- No noise after streaming stops
- Clear online manual in English & French
- 1-year warranty, Ottawa-based support
Gold Series RCA Stereo Interconnect | Radique Audio
Radique Audio Gold Series RCA Stereo Interconnect — dual RCA to dual RCA with vintage-safe, gold-plated connectors and 6-layer shielded construction. Featuring 262 strands of tinned copper, dual-layer copper and foil shielding, and slim narrow-profile connector barrels designed to fit tightly spaced vintage RCA jacks. Available in 0.2 m, 0.75 m, and 1.5 m lengths. Audiophile quality without the audiophile pricing.
Custom Speaker Cable Builder
🎯 Your specs, your cable — choose cable type, length & connectors
💰 Live pricing — price updates instantly as you configure
↔️ Bi-wire capable — available on Kimber 4PR, Kimber 4TC and House Quad
🔥 Heat-shrink reinforced — colour-coordinated at every termination & joint
🍁 Hand-assembled in Ottawa — backed by our Bumper-to-Bumper Warranty
Related Products
Yamaha R-S300 Stereo Receiver — 50 WPC, MM Phono, Sub Out
A two-channel Yamaha receiver from the R-S series, 50 watts a side, with a proper moving-magnet phono stage, a subwoofer output and switching for two pairs of speakers.
✔️ Condition: Very Good — tested and confirmed working across all inputs and both speaker channels
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JVC RX-307 Stereo Receiver — 80 WPC, Original Remote & Manual
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Marantz 2245 Stereo Receiver – 45 WPC, Level 1 Serviced, Japan
A Marantz 2245 from the golden age of the receiver, serviced on our bench and wearing its original Marantz case.
✔️ Condition: Very Good — original vented woodgrain case, sound
✔️ Level 1 service on our own bench, with post-service testing
✔️ 45 WPC · MM phono stage · tape loop · pre-out / main-in · two speaker pairs
✔️ Made in Japan — confirmed on the rear rating plate
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Ottawa Valley cherry cabinet available to order
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.














