Canare 4S8 Bi-Wire Speaker Cables – 3.5 ft Pair, Star Quad
$125.00
A pair of 3.5 ft Canare 4S8 Star Quad speaker cables, bi-wired, with Radique Audio gold-plated banana plugs at both ends.
✔️ Canare 4S8 Star Quad cable: four 16 AWG conductors, 13 AWG per leg
✔️ Bi-wired: one pair of banana plugs at the amplifier end, two pairs at the speaker end
✔️ Radique Audio gold-plated banana plugs at both ends
✔️ 3.5 ft (1.07 m) per side
✔️ Hand assembled, for music and home theatre
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
1 in stock
A pair of 3.5 ft Canare 4S8 speaker cables, bi-wired with Radique Audio banana plugs at both ends.
Bi-wired for bookshelf speakers
A pair of Canare 4S8 3.5′ speaker cables, bi-wired with Radique Audio banana plugs at both ends (one pair at the amplifier end, dual pairs at the speaker end). Perfect for bi-wiring your high quality bookshelf speakers in a small deployment.
This pair of 3.5′ Canare 4S8 Star Quad speaker cables is a handcrafted, audiophile-quality speaker cable with banana to banana connectors. This premium speaker cable utilizes 13 AWG Star Quad cable, which virtually eliminates EMI while offering minimum resistance and a high-quality frequency response due to low capacitance. Designed for both music and home theatre applications, this hand assembled cable utilizes audiophile quality, Radique Audio gold-plated banana connectors at each end.
From Canare
“Speaker cable must accommodate relatively high signal levels, typically tens to hundreds of watts of RMS power. Electromagnetic interference (EMI) can radiate from these speaker lines directly into adjacent low voltage cables (i.e. microphone, video lines, etc.). Canare solves this problem by using a 4-conductor “Star Quad” configuration in all of our 4S Series speaker cables. Because every conductor is located the same distance from the center, the opposing magnetic fields are cancelled out. Attenuation of magnetic field radiation is superior when compared to a standard 2-conductor speaker wire.”
“Our most popular 4 x 16 AWG flexible speaker cable. Perfect choice for all broad spectrum speaker systems and general purpose power amp setups. Good on Bi-Amped and Bi-Wired applications. Features: Super Flexibility, even in Sub-Zero Weather. Star Quad Design Reduces EMI Noise. Low Capacitance and Resistance.”
Canare 4S8 Bi-Wire Cable Specifications
- Construction: Gold plated Radique Audio banana connectors, polyethylene dielectric insulation, Canare 4S8 13 AWG star quad speaker cable
- Length: 3.5′ / 1.07 m
- Nominal outside diameter: .327 in. (8.3 mm)
- PVC jacket nominal thickness: .043 in. (1.1 mm)
- Brittle point: -56 degrees Fahrenheit (-49 Celsius)
- Number of conductors: 4
- Insulation: PE, 19.7 mil
- Conductors: #16 AWG (50/7.09 mil), cross-sectional area 1969 mil², twin conductors #13 AWG effective
- Conductor D.C. resistance, quad wired: 4.5 ohm/1000ft (1.5 ohm/100m)
- Nominal capacitance, quad wired: 44 pF/ft (145 pF/m), between twin red and twin white conductors
- Dielectric strength: 500V AC/1min
- Insulation resistance: >1000M ohm (3Mft)
See everything we have in stock from canare.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 7 lbs |
|---|---|
| Dimensions | 8 × 10 × 2 in |
You may also like…
Radique Audio Banana Plugs – Gold-Plated, Dual Set Screws
Banana plugs that stay put: gold-plated, with two set screws holding the wire instead of one.
- Six-leaf gold-plated springs for a tight fit in the binding post
- Full-length non-conductive jackets, colour-coded red and black
- Fits 12 to 18 AWG speaker wire; 19.4 g a pair
- Packs of 1, 2, 4, 5, 7 or 14 pairs
- 1-year warranty
Radique Audio Bi-Wire Speaker Bridges – Banana/Spade, Set of 4
Better bridges for bi-wire speakers: a set of four, banana at one end and spade at the other, to replace the stock jumper plates.
- 12 in (304 mm), high-purity copper in a black and red braided sleeve
- Gold-plated banana plugs and 3 mm spades; fits posts up to 8 mm
- Red and black anodized housings for polarity
- Assembled by hand; custom lengths on request
- 1-year warranty
Related Products
Monster Cable Z1R Reference Speaker Cables – 4 ft Pair, Bananas
A 4 ft pair of Monster Cable Z Series Z1R Reference Energy Coherent speaker cables, terminated at both ends with Monster banana plugs.
✔️ Time Correct multiple gauge wire networks
✔️ PEX dielectric
✔️ MultiTwist construction and Magnetic Flux Tube
✔️ Monster Audio banana plugs at both ends
✔️ 4 feet (1.22 meters), sold as a pair
✔️ Suits high-end bookshelf speakers and smaller home theater setups
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Acoustic Research Flat Speaker Cables – 42 in Pair, 16 GA
An attractive pair of 42-inch Acoustic Research pure copper 16 GA flat speaker cables, terminated with our Radique Audio banana plugs.
✔️ Acoustic Research Pure Copper 16 GA High Definition flat cable
✔️ 42 inches per cable, sold as a pair
✔️ Terminated with premium Radique Audio banana plugs
✔️ Joints and terminations reinforced with color coordinated shrink tubing
✔️ Lay-flat cables for small systems
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Pair of 4′ 13 AWG Kimber Kables with Banana Plugs
Eight strands of 19.5 AWG oxygen-free copper braided in Kimber's black and brown jacket — four strands per leg, which aggregates to 13 AWG a side. Polyethylene dielectric, and the braid keeps series inductance to 0.23 µH per metre. Four feet a side, terminated at both ends with Radique Audio banana plugs.
Pair of 6′ Canare 4S8 13 AWG Speaker Cables (B/S)
Canare's 4S8 in a four-conductor star-quad geometry — every conductor the same distance from the centre, so the opposing magnetic fields cancel and the cable radiates far less interference into whatever runs beside it. 13 AWG, low capacitance and resistance, and flexible even below freezing. Terminated here with our own banana plugs at one end and spade connectors at the other.
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
Linn K20 Speaker Wire Extension Cables, 4 m Pair – 11 AWG
A matched pair of Linn K20 speaker wire extension cables, four metres each: banana plugs one end, insulated 4 mm sockets the other, no cutting or splicing.
✔️ 4 sq mm copper cores, about 11 AWG
✔️ Very good condition
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
