Bose Acoustimass 10 Series II Bass Module | Black, Passive
$95.00
Three 5.25-inch dual-voice-coil woofers in a 28-pound passive module — the bass box from the Acoustimass 10 Series II system, sold on its own. Read that literally: it needs the proprietary Bose interconnects and satellites to work at all, and will not connect to a receiver by itself. It is here for owners who have the rest of the system and need the module. Tested before listing.
1 in stock
Bose Acoustimass 10 Series II Bass Module | Black, Passive
A powerful, triple-woofer passive bass module from Bose’s popular Acoustimass 10 Series II home theater system — ideal as a replacement or upgrade for existing Acoustimass 10 Series II owners.
This is the Acoustimass bass module only — sold without satellite speakers or interconnect cables. It is specifically designed for use with the Bose Acoustimass 10 Series II system and requires the matching Bose proprietary interconnect cables and satellite speakers to function. This unit is best suited to an existing Acoustimass 10 Series II owner whose original module has been damaged or lost, or who wants a spare. It is not a standalone subwoofer and cannot be connected directly to a standard receiver without the original Bose cabling and satellites.
For those with the matching system already in hand, this module delivers serious bass — three 5.25-inch dual-voice-coil woofers work together in a compact, scratch-resistant black enclosure that can be positioned vertically or horizontally. The port opening should face 2 to 3 inches from a wall or corner for best bass performance, and the module should be kept at least 2 feet from a television as it is not video shielded.
As with every component we sell at Radique Audio, this unit has been thoroughly tested before listing.
Specifications:
Type: Passive bass module (Acoustimass 10 Series II system component)
Woofers: Three 5.25 inch dual-voice-coil drivers
Compatible receiver power: 10–200 W per front channel; 10–100 W per rear channel
Compatible receiver impedance: 4–8 ohms
Finish: Scratch-resistant black textured
Orientation: Vertical or horizontal placement
Note: Requires Bose Acoustimass 10 Series II proprietary interconnect cables and satellite speakers — not included
Dimensions: (W x H x D) 23 x 14 x 7.5 inches / 58.5 x 35.5 x 19.0 cm
Weight: 28.7 lbs / 13.0 kg
If you own a Bose Acoustimass 10 Series II system and need a replacement bass module in good condition, this is the one. At this price, it’s a very cost-effective way to get your system back up and running.
Backed by Radique Audio’s 90-day warranty and perpetual trade-back policy, this is a confident, low-risk purchase; asking $95
| Weight | 31 lbs |
|---|---|
| Dimensions | 11.5 × 27 × 18 in |
Related Products
LG SH96TA-W Passive Subwoofer, Front-Firing, Front-Ported, Black
The passive subwoofer that shipped with LG's SH96TA home-theatre system — forward-firing driver and a front port, so it can back onto a wall or sit inside a cabinet without upsetting the tuning. It is a 3-ohm load and needs a receiver with a dedicated passive-subwoofer output; it should not go on ordinary speaker terminals. No power cord, no plate amp to age out. Good cosmetic condition.
Infinity Modulus MSW-II 12″ Powered Subwoofer – 600W Peak
Polk Audio PSW350 10″ Front-Firing Powered Subwoofer 260W
A 10-inch front-firing Dynamic Balance woofer on a 100-watt RMS amplifier — 260 watts dynamic — in a dual-rear-ported cabinet good for 25 to 180 Hz. Speaker-level in and out, stereo line inputs and an unfiltered LFE jack, with a variable 60 to 160 Hz low-pass and a phase switch. 37 lbs, black matte. Very good cosmetic condition.
Yamaha YST-SW105 Active Servo Subwoofer — Compact 100W
An 8-inch front-firing paper cone on Yamaha's Advanced Active Servo amplifier — 100 watts into 5 ohms, down to 30 Hz, from a cabinet small enough to tuck beside a bookshelf pair. Continuously variable high-cut from 50 to 150 Hz, a Music/Movie voicing switch, RCA and speaker-level inputs plus full-range pass-through outputs. Very good condition.
Yamaha SW-3 Active Servo Subwoofer — 10″ Woofer | Air Woofer Tec
Yamaha’s Active Servo Technology couples a negative-impedance drive amplifier to a Helmholtz resonator port — the Air Woofer opening — so the amplifier corrects the driver’s motion as it works. 100 watts into a 25 cm cone, rated down to 25 Hz, with a continuously variable 50–150 Hz high-cut at 24 dB per octave. Speaker-level and line inputs both. Very good condition.
Mirage LF-150 10″ Powered Subwoofer – 600W Peak, Made in Canada
A discrete MOSFET Class A/B amplifier rated 150 watts continuous and 600 watts dynamic peak, driving a 10-inch polypropylene titanium-deposit woofer on a 1.5-inch voice coil and a 28-ounce magnet. Front-ported to 23 Hz, with level, phase and crossover on the front panel instead of the back. Made in Canada, 45 lbs; very good condition.
JVC SX-PW33 Slim Tower Subwoofer — 6.5in, 100W, High-Pass Out
A tall, narrow bass column meant to stand beside a cabinet rather than in front of it — 8.25 inches across the front and unusually deep at 17, which is the trade: the depth buys back the internal volume the narrow baffle gives away, so a 6.5 inch woofer is properly loaded in a strip of floor barely wider than a hardcover book. Driven by an integrated 100 watt amplifier, with speaker-level inputs and high-pass outputs so it works with an amplifier that has no subwoofer output at all. Good condition.











