Klipsch KF-26 Icon 400W Peak! Floorstanding Speakers
$495.00
2 in stock
Klipsch KF-26 Icon 400W Peak! Floorstanding Speakers.
These Klipsch KF-26 Icon floorstanding speakers deliver classic horn-loaded energy with high efficiency and punchy bass, making them an excellent choice for dynamic home theatre or stereo systems in very good condition.
Designed as slim, two-way towers with dual 6.5-inch woofers and a 1-inch aluminum compression driver on a Tractrix horn, the KF-26 can fill small to medium rooms with ease while remaining easy to drive thanks to their high 97 dB sensitivity. The front-firing port allows more flexible placement closer to walls compared with rear-ported designs, which helps when positioning near TVs or in tighter living spaces. Their black ash vinyl finish and relatively narrow 7.8-inch baffle give them a modern, understated look that still reads “proper hi-fi” when the grilles come off to reveal the drivers. This pair is in very good condition overall, with clean cabinets and drivers and only light cosmetic wear consistent with careful use.
Key features and specifications (per speaker)
2-way bass-reflex floorstanding loudspeaker with front-firing port
High-frequency driver: 1-inch (2.54 cm) aluminum diaphragm compression driver mated to 90° x 90° Tractrix horn
Low-frequency drivers: dual 6.5-inch (16.5 cm) magnetically shielded IMG woofers
Frequency response: 38 Hz – 23 kHz (±3 dB), low-frequency extension to about 35 Hz
Sensitivity: 97 dB @ 2.83 V / 1 m
Nominal impedance: 8 ohms compatible
Power handling: 100 W RMS / 400 W peak
Crossover frequency: 1,800 Hz
Inputs: dual 5-way binding posts (bi-wire / bi-amp capable)
Enclosure material: MDF cabinet with front-firing port, black ash vinyl finish
No digital inputs or outputs (passive loudspeakers)
Dimensions and weight (per speaker)
Dimensions: (Width x Height x Depth) 7.8 x 39 x 13.5 inches (198 x 991 x 343 mm), including feet
Weight: 43 lbs (19.5 kg)
At 43 lbs each, these slim towers have a reassuring heft that reflects a solid MDF cabinet and proper internal bracing, contributing to cleaner mids and tighter bass than many lighter entry-level towers. For listeners who want lively, efficient Klipsch towers that deliver impactful movie soundtracks and engaging music playback without demanding huge amplifier power, this very good condition pair of KF-26 Icons is a compelling choice.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
⭐ Don’t Just Take Our Word For It
Radique Audio holds over 600 customer ratings averaging 4.97 stars across six public platforms — Facebook Marketplace, Kijiji, Canuck Audio Mart, Google and others. Every rating lives somewhere we don’t control, so you can read the originals yourself, including the less flattering ones. See what our customers say. 👉
| Weight | 90 lbs |
|---|---|
| Dimensions | 17.5 × 22 × 43 in |
Related Products
- >
- — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery
>Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
