Marantz SR5500 630 Watt 7.1 AVR with Multi-Room support
$225.00
Ninety watts a channel into 8 ohms across seven discrete current-feedback amplifier stages, with 192 kHz/24-bit conversion on every channel and a 32-bit DSP handling Dolby Digital EX, Pro Logic IIx, DTS-ES and Circle Surround II. Multi-room and multi-source, four assignable digital inputs, an RS232C port for external control, and a metal faceplate and volume knob. 28.7 lbs. Marantz remote included.
1 in stock
Marantz SR5500 630 Watt 7.1 AVR with Multi-Room support
The SR5500 is an embarrassment of riches. Each “current feedback” amplifier produces 90 Watts RMS, sufficient for all but the largest rooms or most inefficient speakers. The 32-Bit microprocessor decodes all Dolby, DTS surround sound formats, and SRS’ Circle Surround II.
Consider the SR5500’s multi-source/multi-room capabilities. Look no further than the front panel inputs to conveniently plug in a camcorder, portable DVD player and/or game console. You’ll appreciate the SR5500’s enhanced video conversion capabilities as you watch a full complement of sources through your monitor’s high quality component video input. Want a customized system? The RS232 port allows total control for external sources. The on-screen display quickly guides you through setup. The SR5500’s “Lip Sync” circuit assures you that sounds reach your ears at exactly the moment your eyes say they should.
• 90 Watts (into 8 ohms) x 7 ch Amps
• Dolby Digital EX®, Pro Logic IIx® (Movie/Music/Game),
• DTS 96/24, ES® (Discrete 6.1/Matrix 6.1), Neo:6 (Cinema/Music)
• SRS Circle Surround II®
• All Discrete “Current Feedback” Amplifier Stages
• 32-Bit DSP
• 192kHz/24-Bit D/A Converters for all Channels
• Dolby Headphone
• Video Up-conversion: Composite/S-Video to Component
• Multi-room/Multi-source Capability with DiscreteCommands
• Multi Speaker “B” Output
• Lip Sync Control
• On Screen Display
• Pure Direct Mode
• Video Off Mode
• Variable Crossover
• Assignable HD Compatible Component Video Switching (2 in/1 out)
• 4 Assignable Digital Inputs (2 optical/2 coaxial)
• 2 Digital Outputs (1 optical/1 coaxial)
• Front Panel A/V Inputs
• 50 Station Presets
• Manual Station Naming
• RS232C Terminal for System Control
• 1 Switched and 1 Un-switched AC Convenience Outlets
• D-BUS (RC-5 In/Out) Remote Connection
Dimensions & Weight: 17.7″ W × 6.4″ H × 18.3″ D (450 × 163 × 465 mm), 28.7 lbs (13 kg)
Includes Marantz Remote, and soft copy of manual in PDF.
Solid, well constructed unit, boasting metal faceplate and volume knob, and weighing in at 28.7lbs. Asking just $225; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 31 lbs |
|---|---|
| Dimensions | 22.3 × 21.7 × 6.4 in |
You may also like…
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Related Products
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
Onkyo TX-NR737 770W 7.2 Atmos 4K Wi-Fi Bluetooth THX AVR
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
