PSB Image T45 Floorstanding Tower Speakers
$495.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Other towers we have in stock now
3 in stock · $445.00–$1,295.00 · all ship
PSB Image 4T 2.5-Way Tower Speakers — Made in Canada, Bi-Wire$445.00Ships
PSB Imagine T Towers – Gorgeous Dark Cherry Real Wood Veneer$1,295.00Ships
Klipsch KF-26 Icon 400W Peak! Floorstanding Speakers$495.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →PSB Image T45 Floorstanding Speakers – Very Good Condition
The PSB Image T45 represents PSB’s acclaimed Image series engineering, employing two 5¼” midrange/bass drivers in conjunction with a 1″ tweeter in a sophisticated two-and-a-half-way design for exceptional performance and value.
From PSB’s Design Philosophy:
The T45 utilizes a refined crossover design where the tweeter handles everything above 2.2kHz, while the midrange transitions to the bass driver at 500Hz. The T45 is referred to as a two-and-a-half-way because one 5¼” driver performs double duty, handling both the midrange and upper-bass regions for seamless integration and natural sound reproduction.
Key Features:
Two 5¼” midrange/bass drivers with sophisticated crossover design
1″ tweeter for crisp, detailed highs
Two-and-a-half-way configuration for optimized frequency response
Heavy non-resonant wood composite cabinet with extensive cross-bracing
Dual front-firing ports for flexible placement near walls
All drivers magnetically shielded for video monitor compatibility
Dual five-way gold-plated binding posts for biamping/biwiring options
Specifications:
Frequency Response: 35Hz–23kHz (±3dB)
Low-frequency Extension: 30Hz (-10dB)
Sensitivity: 90dB/W/m (anechoic), ~93dB/W/m (listening room)
Impedance: 6 ohms nominal, 4 ohms minimum
Power Handling: 10 – 150 watts
Dimensions: 36″H × 7″W × 14⅝”D (914 × 178 × 371mm)
Weight: 37 lbs (16.8 kg) each
Design Advantages: The front-firing dual ports allow closer wall placement when necessary, while the relatively easy 6-ohm load ensures compatibility with a wide range of amplifiers. The extensive internal bracing minimizes cabinet resonance for clean, accurate sound reproduction.
These PSB Image T45 speakers deliver the renowned Canadian engineering and natural sound signature that has made PSB a favorite among audio enthusiasts and professionals worldwide.
Original MSRP: $749 USD – Asking just $495 CAD for this very clean pair of PSB Image T45s in excellent condition; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 83 lbs |
|---|---|
| Dimensions | 18.6 × 20 × 40 in |
Related Products
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
Monitor Audio Bronze 3 Towers — Shot-Loaded, Made in England
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
The flagship of Energy’s Connoisseur range, built in Toronto by a company whose voicing grew out of the National Research Council’s listening work in Ottawa. Two 8-inch aluminium-polypropylene woofers and a cloth-suspended aluminium dome, crossed at 1,800 Hz and reaching 28 Hz — genuinely full-range, so most rooms will not want a subwoofer under them. At 93 dB it runs happily on 30 watts. High-gloss black, made in Canada, 57 lb each. Very Good condition. Pair — pickup in Kanata, or we deliver.
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
