Vintage Marantz 50 WPC Stereo Receiver MR 1150
$495.00
Out of stock
Email when stock available
Vintage Marantz 50 WPC Stereo Receiver, Made in Japan.
This classic model retailed new in 1980 -1981, is in great vintage condition, and is working beautifully, with plenty of old-school power.
It features a good quality phono stage, and three additional pairs of analog inputs, including 2 with output loops suitable for adding an EQ etc. It can drive 2 pairs of speakers, and offers a Low Filter, FM Muting and Loudness functions, in addition to an excellent rotary tone control section which allows for adjustments in bass, mid, and treble, providing flexibility in sound customization.
Specifications:
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 60kHz
Total harmonic distortion: 0.025%
Damping factor: 50
Input sensitivity: 2.7mV (MM), 160mV (line)
Signal to noise ratio: 88dB (MM), 98dB (line)
Output: 580mV (line)
Dimensions: 18.3 x 15.4 x 5.9 inches (46.5 x 39 x 15 cm). Weight: 22 lbs, (10 kg)
The Marantz MR 1150 is a seldom seen, made in Japan vintage amplifier offering excellent sound quality and durability making it a strong choice for those seeking a classic audio experience. If you’re looking for a piece of audio history that still delivers impressive sound today, consider adding the Marantz MR 1150 to your collection.
Asking $495 for this great sounding Marantz Stereo Receiver; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 25 lbs |
|---|---|
| Dimensions | 19.4 × 22.3 × 9.9 in |
Related Products
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
