Yamaha RX-V667 7.2 AVR 630W 6x HDMI 3D Ready, Remote & Mic
$245.00
Out of stock
Get first dibs on the next one
Yamaha RX-V667 7.2 AVR 630W 6x HDMI 3D Ready, Remote & Mic
If the sound from your HDTV just isn’t cutting it, the Yamaha RX-V667 offers a serious upgrade, with seven channels of clean 90 WPC power into 8 ohms and full support for Dolby TrueHD and DTS-HD Master Audio for a genuine wraparound home theater experience that is far beyond basic TV sound. With 6 HDMI 1.4a inputs, 3D pass-through, and Audio Return Channel, it can act as the central hub for your Blu-ray player, game console, streamer, and HDTV while returning digital audio from the TV over the same HDMI cable.
The RX-V667 provides analog-to-HDMI conversion and upconversion of non-HD sources up to 1080p, so older composite and component video devices can be tidied up and sent to your TV via a single HDMI connection. Yamaha’s SCENE buttons make everyday use easy: one press can recall the right input and sound mode for Blu-ray, TV, radio, or music, and each button can be reprogrammed for activities like gaming or streaming. Dual-room/dual-source capability with powered or line-level Zone 2 output, plus the option to bi-amp compatible front speakers, gives you flexibility to grow into a second zone or extract more performance from quality mains.
Specifications:
Power output: 90 watts x 7 into 8 ohms (20–20,000 Hz, 0.08% THD)
Total power: 630W (90W x 7)
Surround formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS-HD High Resolution Audio, Pro Logic IIx
Video: 6 HDMI inputs / 1 HDMI output (HDMI 1.4a with 3D, ARC, Deep Color, x.v.Color, auto lip-sync, HDMI-CEC)
Video processing: Analog-to-HDMI conversion and upconversion to 1080p
Digital inputs: 2 optical, 2 coaxial
Analog inputs: 3 A/V inputs (including 1 front-panel), 2 audio-only inputs
Multiroom: Dual-room/dual-source with powered or line-level Zone 2 output (analog sources only in Zone 2)
Additional features: Cinema DSP, Adaptive Dynamic Range Control, Silent Cinema headphone surround, Compressed Music Enhancer
Preamp I/O: 7.1-channel analog input; 7.2-channel preouts for external amps and up to 2 powered subs
Dimensions: (Width x Height x Depth) 17.1 x 6.0 x 14.5 inches (435 x 151 x 364 mm)
Weight: 23.0 lbs (10.5 kg)
This Yamaha RX-V667 is a well-equipped 7.2-channel AV receiver with strong 90 WPC amplification, 6x HDMI with 3D and ARC, flexible Zone 2 and bi-amping options, and it comes complete with the original Yamaha remote control and YPAO calibration microphone for proper setup. Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 25 lbs |
|---|---|
| Dimensions | 18.5 × 21.1 × 10 in |
Related Products
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
NAD T 757 7.1 AV Receiver – 7 x 60W, 7 Digital Inputs, Remote
A 7.1-channel NAD surround receiver in very good condition, rated at 60 watts per channel with all seven channels driven, with seven digital audio inputs, NAD's modular design and a remote.
✔️ Very good condition — free of significant marks; remote included
✔️ 7 x 60 W, all channels driven — Dolby TrueHD and DTS-HD Master Audio
✔️ Seven digital audio inputs and four HDMI inputs (1080p and 3D)
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
