Gorgeous Energy Connoisseur Tower Speakers in Rosewood C-6
$795.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Other towers we have in stock now
3 in stock · $395.00–$595.00 · all ship
Energy Connoisseur CF-50 2.5-Way Tower Speakers$595.00Ships
Gorgeous Energy Slim-Tower Speakers C-500B$495.00Ships
Energy Connoisseur CF-30 2.5-Way Tower Speakers$395.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →Energy Connoisseur C-6 Rosewood Floorstanding Speakers – Canadian Reference Tower
Upgrade your music or home theatre with this gorgeous pair of Energy Connoisseur C-6 floorstanding speakers in premium rosewood finish. Proudly crafted in Canada and thoroughly tested to ensure flawless, balanced performance, the C-6 was a flagship of Energy’s renowned Connoisseur lineup—offering breathtaking clarity, deep articulate bass, and a revealing, non-fatiguing treble.
Each C-6 tower incorporates dual 6.5″ aluminum/polypropylene woofers for powerful, room-filling bass and tight midrange, paired with a 1″ aluminum dome tweeter for sparkling, extended highs. The clever multi-chambered, heavily braced bass-reflex cabinet controls resonance and port noise, allowing the C-6 to produce true full-range sound down to 37Hz—easily rivaling much larger or more expensive designs.
With a crossover at 1.8kHz, sensitivity rated at 90dB, and an 8-ohm impedance, these speakers deliver exceptional dynamics and realism with nearly any integrated amp, receiver, or separates. The C-6’s neutral voicing, wide dispersion, and airy top end make them an outstanding choice for audiophiles and movie fans seeking both accuracy and drama. The beautiful hand-finished rosewood veneer, solid construction, and elegant proportions make these towers a gorgeous centerpiece for any room.
Specifications:
Design: 3-driver, 2.5-way bass-reflex, floorstanding tower
Woofers: 2 x 6.5” aluminum/polypropylene composite
Tweeter: 1” aluminum dome, ferrofluid cooled
Crossover: 1.8 kHz, second order
Frequency Response: 37–25,000 Hz (±3 dB)
Sensitivity: 90 dB/W/m
Impedance: 8 ohms nominal, 4.5 ohms minimum
Recommended amplifier power: 35–175W RMS
Cabinet: Multi-chambered, rear-ported, MDF with internal bracing, rosewood veneer
Dimensions: 36.2 x 9.7 x 16.6 inches (920 x 246 x 422 mm)
Weight: 40 lbs (18.2 kg) each; 80 lbs (36.4 kg) per pair
These Canadian-engineered and rosewood-clad Energy C-6 towers bring big, refined, and effortless sound to music and movies alike—ready for years of high-performance listening. Add beauty, power, and Canadian heritage to your home audio system with these outstanding reference towers.
Asking just $795 for these beautiful and great sounding, made in Canada, Energy Connoisseur C-6 speakers in distinctive Rosewood Finish; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 85 lbs |
|---|---|
| Dimensions | 20.6 × 26 × 40.2 in |
Related Products
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
The flagship of Energy’s Connoisseur range, built in Toronto by a company whose voicing grew out of the National Research Council’s listening work in Ottawa. Two 8-inch aluminium-polypropylene woofers and a cloth-suspended aluminium dome, crossed at 1,800 Hz and reaching 28 Hz — genuinely full-range, so most rooms will not want a subwoofer under them. At 93 dB it runs happily on 30 watts. High-gloss black, made in Canada, 57 lb each. Very Good condition. Pair — pickup in Kanata, or we deliver.
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
