B&W Matrix 803 Series 1 Black Ash Speakers, Made in England
$2,195.00
Out of stock
This one has sold. Want first dibs on the next one?
We take these in regularly. Leave your name and email, and we’ll email you the moment one is listed, so you hear first. No cost, no obligation.
Email me when one is listed
Whatever you end up with, it needs cable. Build a set to length →
Read the full listing and see all 6 photos ↓
Other towers we have in stock now
3 in stock · $895.00–$1,395.00 · all ship

Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →B&W Matrix 803 Series 1 Black Ash Speakers, Made in England
Iconic B&W Matrix 803 Series 1 floorstanding speakers in black ash finish, made in England, offering classic three-way Matrix performance, deep bass, and superb imaging in a slim, room-friendly cabinet, very good condition.
The original Matrix 803 (Series 1) uses B&W’s patented Matrix internal bracing to dramatically reduce cabinet resonances, giving a cleaner, more open soundstage and excellent detail retrieval. This three-way bass-reflex design partners a 180 mm Cobex bass driver with a 180 mm Kevlar midrange and a 26 mm ferrofluid-cooled metal dome tweeter, delivering fast, tuneful bass, clear mids, and extended, airy highs. With 90 dB sensitivity and an 8 ohm nominal impedance (4 ohm minimum), they are relatively amplifier-friendly but really come alive with quality power in the 50–200 watt range. The black ash real-wood veneer and slim footprint make them easy to integrate visually into modern or vintage systems, while still offering genuine full-range performance for serious two-channel listening.
As a made-in-England model from B&W’s golden Matrix era, the 803 S1 is still highly regarded for its dynamic, “slammy” presentation that works brilliantly with rock and pop yet remains controlled and reasonably refined with jazz and classical. The rear panel features a bi-wiring terminal panel with gold-plated screw posts, B&W’s APOC protection circuit, and acceptance of banana plugs for flexible connection options. An optional external Variable High-Pass Alignment Filter was available for the 800 series, extending and tailoring low-frequency performance; many enthusiasts still consider it a desirable upgrade when found. This pair in black ash is in very good condition overall for its age, with drivers operating correctly and cabinets presenting well.
Key Specifications (Matrix 803 Series 1):
Type: 3-way bass-reflex floorstanding loudspeaker
Drive units: 1 × 26 mm metal dome tweeter (ferrofluid-cooled), 1 × 180 mm Kevlar cone midrange, 1 × 180 mm Cobex/polymer cone bass driver
Frequency range: 32 – 22,000 Hz (overall), approx. 54 – 20,000 Hz ±2 dB on reference axis
With optional external high-pass filter: extension down towards roughly 23–28 Hz in-room, depending on alignment setting
Sensitivity: 90 dB (2.83 V / 1 m)
Nominal impedance: 8 ohm (minimum approx. 4 ohm)
Recommended amplifier power: 50 – 200 W into 8 ohm
Features: Matrix cabinet construction, bi-wiring terminal panel, APOC protection circuit, gold-plated screw terminals with banana plug option
Finish: Black ash veneer with black cloth grilles
Country of manufacture: England
Condition: Very good cosmetic condition for age, fully tested and working as intended
Dimensions: (Height x Width x Depth) 1017 x 285 x 334 mm (40.0 x 11.2 x 13.1 inches)
Weight: 26.3 kg (58 lbs) each
At about 58 lbs per speaker and just over one metre tall, the Matrix 803 S1 offers serious cabinet volume and structural rigidity without overwhelming a room, producing deep, articulate bass and wide, stable imaging that still competes strongly with many modern designs in its price range.
Made in England, these B&W Matrix 803 Series 1 in black ash are a sought-after classic, combining proven Matrix engineering, real-wood veneer, and genuinely full-range, dynamic sound that makes them an excellent long-term anchor for a serious two-channel system.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence; asking $2195.
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!
| Weight | 120 lbs |
|---|---|
| Dimensions | 17.01 × 28.4 × 44 in |
Bowers & Wilkins began in Worthing, England, in 1966, founded by John Bowers. The name comes from the Worthing electrical shop he ran with Roy Wilkins. Its 800 Series monitors have been used at Abbey Road Studios since 1980, Abbey Road says. We carry B&W towers, bookshelf speakers, centre channels and stands. We've had more than 200 B&W listings so far. Every used B&W here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
The Bowers & Wilkins story, 1966 to today
John Bowers founded B&W in Worthing, England, in 1966, after hand-assembling speakers at the electrical shop he ran with Roy Wilkins. Its first speaker, the P1, used B&W's own cabinet and crossover with bought-in drivers, and the DM1 and DM3 "Domestic Monitors" followed in 1968.
Kevlar and the 801. B&W identified Kevlar as a cone material in 1974, and the DM6 of the mid-1970s used Kevlar cones. The original 801 monitor of 1979 to 1980 made its name in recording studios: Abbey Road says it was the first studio to use it, in 1980, and has used the 800 Series ever since.
Matrix and Nautilus. The Matrix cabinet bracing arrived in the mid-to-late 1980s. John Bowers started the project that became the Nautilus, the spiral-shell flagship, before he died in 1987, and it launched in 1993. The first 600 Series followed in 1995, and diamond-dome tweeters arrived in 2005.
New owners. EVA Automation bought B&W in 2016, Sound United in 2020 and Masimo in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 800 Series Diamond D5, unveiled in June 2026, is built in Worthing.
A Canadian connection. Classé Audio of Montreal was part of the B&W Group from 2001 until B&W closed its Montreal headquarters in 2017.
Which B&W is which?
DM (Domestic Monitor), 1968 onward: from the DM1 and DM3 to models such as the DM6 and DM7. The DM prefix carried into early 600 Series names.
600 Series (1995 to today): B&W's entry hi-fi line; the 2020 Anniversary Edition was its seventh generation. The 606 belongs here.
CDM (mid-1990s to about 2003): such as the CDM 1, with a metal-dome tweeter and a Kevlar cone.
700 Series (about 2003 to 2006): Nautilus technology at mainstream prices, such as the 703 and 705.
CM Series (2006 to 2017): such as the CM1 and the CM4 towers, replaced by the 700 Series S2 in 2017.
800 Series (from 1979 to 1980): from the original 801 through the Matrix, Nautilus 800, Diamond, D3, D4 and D5 generations.
Nautilus (1993): the spiral-shell flagship, still made in small numbers.
Buying used B&W: what to check
Tweeter domes. B&W used metal-dome tweeters in the CDM, 600 and CM lines, and owners report squashed domes. Inspect each dome closely.
Original tweeters. Some CDM-era tweeters are discontinued, and rebuilt or substitute tweeters change the sound. Ask whether the originals are fitted.
Woofer surrounds. Owners report rubber surrounds that have hardened with age. Press each surround gently: it should feel supple.
1970s DM models. Expect crossover capacitors in a 40-year-old DM to need replacing.
Where it was made. The 800 Series is built in Worthing; the 600 and 700 Series are made in China. Check the label before calling a B&W "made in England".
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
You may also like…
IsoAcoustics GAIA II Speaker Isolators (Set of 4)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 isolators for one floor-standing speaker or subwoofer up to 120 lb (54 kg)
- ✔️ Screws in place of your spikes: M6-1.0, M8-1.25 and 1/4″-20 adaptors included
- ✔️ Machined stainless steel, dark chrome, 2 × 1.7 in (51 × 43 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
IsoAcoustics GAIA III Speaker Isolators (Set of 4)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 isolators for one floor-standing speaker or subwoofer up to 70 lb (32 kg)
- ✔️ Screws in place of your spikes: M6-1.0, M8-1.25 and 1/4″-20 adaptors included
- ✔️ Stainless steel, 1.7 × 1.5 in (43 × 39 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
Radique Audio Banana Plugs – Gold-Plated, Dual Set Screws
Banana plugs that stay put: gold-plated, with two set screws holding the wire instead of one.
- Six-leaf gold-plated springs for a tight fit in the binding post
- Full-length non-conductive jackets, colour-coded red and black
- Fits 12 to 18 AWG speaker wire; 19.4 g a pair
- Packs of 1, 2, 4, 5, 7 or 14 pairs
- 1-year warranty
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
Related Products
JVC Theatre Series SP-5500 Tower Speakers, Pair – 8-inch Woofers
A pair of JVC Theatre Series SP-5500 two-way tower speakers in black woodgrain, with front-ported bass-reflex cabinets, tested on our bench and in very good condition.
✔️ Very good condition — free of significant marks, grilles included
✔️ 8-inch woofers in front-ported Theatre Series towers
✔️ Built-in circuit breaker protects the tweeters
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Vintage Pioneer CS-77 12″ 3-Way Speakers, Pair – Made in Japan
A pair of late-1960s Pioneer CS-77 three-way speakers, made in Japan, in walnut veneer cabinets with their wooden diamond-lattice grilles. Their High Level controls have been freshly serviced, they have been tested on our bench, and they are in good condition.
✔️ Good condition — walnut veneer, wooden lattice grilles included
✔️ High Level controls freshly serviced, tested on our bench
✔️ 12-inch woofer, three-way design — made in Japan, late 1960s
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Linn Keilidh Floorstanding Speakers, Pair – Made in Scotland
A pair of Linn Keilidh floorstanding speakers, built in Glasgow, Scotland, in Linn's deep red Rosenut veneer, set up for bi-wiring.
✔️ Tested on our bench
✔️ Very good condition
✔️ Bi-wire ready: build your cable with our Cable Builder
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Acoustic Research TSW 510 Vintage Towers, Pair – Refoamed, Oak
A pair of Acoustic Research TSW 510 three-way floorstanding speakers from the late 1980s, with solid oak tops and plinths, freshly refoamed.
✔️ Freshly refoamed woofers and midranges
✔️ Very good condition, grilles included
✔️ 3-way acoustic suspension, 10" woofer, titanium tweeter
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Curbside delivery, local collection or freight within Canada
Klipsch RF-62 Reference IV Floorstanding Speakers, Pair — 97dB
The RF-62 is the tower that made Klipsch's Reference line the default answer for anyone who wanted a big, unforced sound without buying a big, expensive amplifier to get it.
✔️ Condition: Good — cabinets carry touched-up wear; drivers Very Good throughout
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Curbside delivery, local collection or freight within Canada
Focal Chorus 714V Floorstanders, Pair — Light Walnut, France
A pair of Focal Chorus 714V floorstanding loudspeakers in Light Walnut, made in France.
✔️ Condition: Very Good — thoroughly inspected and tested
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
JBL Northridge E80 3-Way Towers – Cherry, Bi-Wirable, Pair
A four-driver JBL tower in the Cherry finish, with a genuine bi-amp panel.
✔️ Condition: Very Good — cabinets present well, working properly
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Mirage OMNI 350 Omnipolar Towers – Designed in Canada, Black Ash
A pair of slim Mirage towers built around the company's Omnipolar design, in very good condition, that fill a room with sound instead of aiming it at one chair.
✔️ Very Good condition — black ash cabinets, drivers and grilles present cleanly
✔️ Designed and engineered in Canada around Mirage's room-filling Omnipolar sound
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Monitor Audio Silver S8 Towers – Made in England, Warm Beech
A pair of three-way Monitor Audio towers from the Silver S range, in very good condition, with a metal driver in every position and a warm beech veneer that suits almost any room.
✔️ Very good condition — free of significant marks, in Warm Beech real wood veneer
✔️ Made in England, with Monitor Audio's C-CAM metal drivers throughout
✔️ Bi-wire and bi-amp ready — two pairs of 5-way binding posts per speaker
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
