Infinity Modulus MSW-II 12″ Powered Subwoofer – 600W Peak
$495.00
1 in stock
Infinity Modulus MSW-II 12″ Powered Subwoofer – 300W RMS, Silver
The Infinity Modulus MSW-II is a high-performance 12-inch powered subwoofer designed to anchor Infinity’s Modulus II home theater system, combining a 300-watt RMS amplifier, a CMMD ceramic-cone driver, and the proprietary R.A.B.O.S. room optimization system in a compact, silver-trimmed enclosure. This example is in very good condition and has been fully tested to confirm strong, clean output and proper operation of all controls.
At the heart of the MSW-II is a 12″ CMMD (Ceramic Metal Matrix Diaphragm) woofer — the same driver material Infinity employed in its higher-end reference lines — driven by a dedicated 300-watt RMS (600-watt peak) internal amplifier. The sealed-box, magnetically shielded cabinet focuses on accurate, low-distortion bass rather than exaggerated output, delivering a rated frequency response of 27 Hz to 100 Hz (±3 dB) — genuine deep bass that extends well below most program content.
R.A.B.O.S. (Room Adaptive Bass Optimization System) is among the MSW-II’s most practical features: it provides parametric EQ adjustment that allows the user to identify and tame the primary bass resonance of their room, producing tighter, more natural low frequencies rather than the bloated one-note bass that afflicts many rooms and subwoofers. The crossover is fixed at 100 Hz (12 dB/octave), integrating cleanly with most small satellite and bookshelf speakers. The silver / platinum finish with complementary trim was designed to match the Modulus II satellite and center speakers, but it looks equally at home alongside other brands in a modern or vintage home theater setup.
Key Specifications – Infinity Modulus MSW-II
Driver: 12″ CMMD (Ceramic Metal Matrix Diaphragm) magnetically shielded woofer
Amplifier power: 300 W RMS / 600 W peak
Frequency response (±3 dB): 27 Hz – 100 Hz
Crossover: Fixed 100 Hz, 12 dB/octave
Room EQ: R.A.B.O.S. (Room Adaptive Bass Optimization System) parametric EQ
Enclosure: Sealed, magnetically shielded
Finish: Platinum/silver
Dimensions (H × W × D): 16¾” × 14½” × 18⅛” (425 × 368 × 460 mm)
Weight: 44 lbs (20 kg)
Cosmetic condition:
This silver MSW-II is in very good cosmetic condition. Cabinet and trim show only light signs of careful home use, with no significant dents, scratches, or damage. All controls, connections, and indicators are clean and fully functional, and the unit has been thoroughly tested to confirm proper amplifier operation and strong, controlled bass output.
A substantial, CMMD-driven Infinity Modulus MSW-II delivering 300 W RMS with genuine 27 Hz bass extension and R.A.B.O.S. room optimization — a serious powered subwoofer for enthusiasts seeking accurate, deep bass from a proven Infinity design.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
⭐ Don’t Just Take Our Word For It
Radique Audio holds over 600 customer ratings averaging 4.97 stars across six public platforms — Facebook Marketplace, Kijiji, Canuck Audio Mart, Google and others. Every rating lives somewhere we don’t control, so you can read the originals yourself, including the less flattering ones. See what our customers say. 👉
| Weight | 46 lbs |
|---|---|
| Dimensions | 22.1 × 18.5 × 20.75 in |
Related Products
JVC SX-PW33 Slim Tower Subwoofer — 6.5in, 100W, High-Pass Out
Infinity Minuette MPS Passive Subwoofer – Dual 6.5″, Front-Ported
A passive subwoofer, which means no power cord, no built-in amplifier and no electronic crossover to fail. Two 6.5-inch polypropylene woofers in a bandpass box, 40 to 150Hz, wired high-level — your amplifier's front outputs go in, your main speakers come off the pass-through, and the sub keeps everything below about 150Hz. Twenty-eight pounds of moulded composite. Very good condition.
LG SH96TA-W Passive Subwoofer, Front-Firing, Front-Ported, Black
The passive subwoofer that shipped with LG's SH96TA home-theatre system — forward-firing driver and a front port, so it can back onto a wall or sit inside a cabinet without upsetting the tuning. It is a 3-ohm load and needs a receiver with a dedicated passive-subwoofer output; it should not go on ordinary speaker terminals. No power cord, no plate amp to age out. Good cosmetic condition.
Polk Audio PSW350 10″ Front-Firing Powered Subwoofer 260W
A 10-inch front-firing Dynamic Balance woofer on a 100-watt RMS amplifier — 260 watts dynamic — in a dual-rear-ported cabinet good for 25 to 180 Hz. Speaker-level in and out, stereo line inputs and an unfiltered LFE jack, with a variable 60 to 160 Hz low-pass and a phase switch. 37 lbs, black matte. Very good cosmetic condition.
Yamaha YST-SW105 Active Servo Subwoofer — Compact 100W
An 8-inch front-firing paper cone on Yamaha's Advanced Active Servo amplifier — 100 watts into 5 ohms, down to 30 Hz, from a cabinet small enough to tuck beside a bookshelf pair. Continuously variable high-cut from 50 to 150 Hz, a Music/Movie voicing switch, RCA and speaker-level inputs plus full-range pass-through outputs. Very good condition.
Yamaha SW-3 Active Servo Subwoofer — 10″ Woofer | Air Woofer Tec
Yamaha’s Active Servo Technology couples a negative-impedance drive amplifier to a Helmholtz resonator port — the Air Woofer opening — so the amplifier corrects the driver’s motion as it works. 100 watts into a 25 cm cone, rated down to 25 Hz, with a continuously variable 50–150 Hz high-cut at 24 dB per octave. Speaker-level and line inputs both. Very good condition.
Mirage LF-150 10″ Powered Subwoofer – 600W Peak, Made in Canada
A discrete MOSFET Class A/B amplifier rated 150 watts continuous and 600 watts dynamic peak, driving a 10-inch polypropylene titanium-deposit woofer on a 1.5-inch voice coil and a 28-ounce magnet. Front-ported to 23 Hz, with level, phase and crossover on the front panel instead of the back. Made in Canada, 45 lbs; very good condition.
