Energy 12″ Active Subwoofer – Made in Canada e:XL-S12
$395.00
Out of stock
Email when stock available
Energy e:XL-S12 Subwoofer – Canadian High-Performance, Tested & Sounding Great
Enhance your music or home theater system with deep, powerful bass from the Energy e:XL-S12 subwoofer—tested, working perfectly, and sounding great. Crafted by Energy, a renowned Canadian audio company, the e:XL-S12 is highly regarded for combining punchy output, tight control, and room-filling extension in a compact footprint. This sub delivers serious low-frequency impact for music, movies, and gaming, bringing excitement and realism to any setup.
Featuring a heavy-duty 12″ polypropylene cone driver with a high-current amplifier, the e:XL-S12 can produce solid output down to 24Hz. The sealed/MDF cabinet is robustly braced to minimize vibration, allowing for accurate bass that’s both deep and musical. With adjustable crossover and volume controls, as well as both line-level (RCA) and speaker-level inputs, setup is flexible for any system. Its auto power-on circuitry and efficient operation keep functionality simple and reliable.
Quality engineering—like a magnetically shielded driver, solid amp board, and Energy’s proven cabinet design—result in bass that’s impactful, tuneful, and free from boom or distortion.
Specifications:
Driver: 12″ reinforced polypropylene cone, magnetically shielded
Amplifier Power: 180 watts RMS (continuous), 350 watts dynamic peak
Frequency Response: 24Hz–100Hz (±3dB)
Low Pass Crossover: Adjustable, 40Hz–120Hz
Inputs: Stereo RCA line-in, high-level binding posts (speaker wire)
Auto-On/Standby: Yes (sensing circuit)
Cabinet: Sealed MDF enclosure, heavy bracing
Controls: Level, crossover frequency, phase
Dimensions: 17 x 15.5 x 16 inches (432 x 394 x 406 mm)
Weight: 46 lbs (21 kg)
This Energy e:XL-S12 subwoofer adds tight, musical bass punch and dynamic extension to your stereo or surround system. Proven Canadian engineering, fully tested, and ready to impress—an affordable upgrade for those who want serious performance and easy integration.
Asking $395 for this attractive and great sounding 12″ Energy Subwoofer.
| Weight | 50 lbs |
|---|---|
| Dimensions | 19.5 × 21 × 20 in |
Related Products
JVC SX-PW33 Slim Tower Subwoofer — 6.5in, 100W, High-Pass Out
A tall, narrow bass column meant to stand beside a cabinet rather than in front of it — 8.25 inches across the front and unusually deep at 17, which is the trade: the depth buys back the internal volume the narrow baffle gives away, so a 6.5 inch woofer is properly loaded in a strip of floor barely wider than a hardcover book. Driven by an integrated 100 watt amplifier, with speaker-level inputs and high-pass outputs so it works with an amplifier that has no subwoofer output at all. Good condition.
LG SH96TA-W Passive Subwoofer, Front-Firing, Front-Ported, Black
The passive subwoofer that shipped with LG's SH96TA home-theatre system — forward-firing driver and a front port, so it can back onto a wall or sit inside a cabinet without upsetting the tuning. It is a 3-ohm load and needs a receiver with a dedicated passive-subwoofer output; it should not go on ordinary speaker terminals. No power cord, no plate amp to age out. Good cosmetic condition.
Infinity Modulus MSW-II 12″ Powered Subwoofer – 600W Peak
Polk Audio PSW350 10″ Front-Firing Powered Subwoofer 260W
A 10-inch front-firing Dynamic Balance woofer on a 100-watt RMS amplifier — 260 watts dynamic — in a dual-rear-ported cabinet good for 25 to 180 Hz. Speaker-level in and out, stereo line inputs and an unfiltered LFE jack, with a variable 60 to 160 Hz low-pass and a phase switch. 37 lbs, black matte. Very good cosmetic condition.
Yamaha YST-SW105 Active Servo Subwoofer — Compact 100W
An 8-inch front-firing paper cone on Yamaha's Advanced Active Servo amplifier — 100 watts into 5 ohms, down to 30 Hz, from a cabinet small enough to tuck beside a bookshelf pair. Continuously variable high-cut from 50 to 150 Hz, a Music/Movie voicing switch, RCA and speaker-level inputs plus full-range pass-through outputs. Very good condition.
Yamaha SW-3 Active Servo Subwoofer — 10″ Woofer | Air Woofer Tec
Yamaha’s Active Servo Technology couples a negative-impedance drive amplifier to a Helmholtz resonator port — the Air Woofer opening — so the amplifier corrects the driver’s motion as it works. 100 watts into a 25 cm cone, rated down to 25 Hz, with a continuously variable 50–150 Hz high-cut at 24 dB per octave. Speaker-level and line inputs both. Very good condition.
Mirage LF-150 10″ Powered Subwoofer – 600W Peak, Made in Canada
A discrete MOSFET Class A/B amplifier rated 150 watts continuous and 600 watts dynamic peak, driving a 10-inch polypropylene titanium-deposit woofer on a 1.5-inch voice coil and a 28-ounce magnet. Front-ported to 23 Hz, with level, phase and crossover on the front panel instead of the back. Made in Canada, 45 lbs; very good condition.
