




Klipsch RF-600 Special Edition Tower Speakers — Made in USA
$795.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Read the full listing and see all 5 photos ↓
Other towers we have in stock now
3 in stock · $495.00–$895.00 · all ship
Attractive, Great Sounding B&W 3-Driver Floor-Standers DM603$895.00Ships
Energy Connoisseur CF-50 2.5-Way Tower Speakers$595.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →Klipsch RF-600 Special Edition Tower Speakers — Made in USA
Klipsch RF-600 Special Limited Edition Reference Series Tower Speakers — American-made, high-efficiency floorstanders with legendary Klipsch horn technology.
Made in the USA, the Klipsch RF-600 was part of Klipsch’s Special Limited Edition Reference series, sitting one model above the popular RF-62 with improved power handling and a more refined cabinet. These are genuinely impressive performers that bring the live music experience into your listening room with their trademark dynamics and remarkable sensitivity.
The RF-600’s signature sound starts with Klipsch’s proprietary Tractrix Horn — a flared, 90° x 60° square horn loaded with a 1″ titanium diaphragm compression driver. This horn design dramatically improves efficiency and directs high frequencies precisely at the listening position, delivering exceptional detail, imaging, and a wide, enveloping soundstage. Paired with dual 6.5″ Cerametallic cone woofers — Klipsch’s distinctive copper-colored anodized aluminum cones, whose ceramic-converted surfaces resist flexing and resonance — the result is articulate, tight bass with smooth midrange and effortless dynamics at any volume level.
The bass-reflex enclosure features dual rear-firing ports and improved internal cross-bracing to minimize cabinet resonance, along with increased baffle ribbing around the horn mouth for cleaner acoustics across the full frequency range. The cast-aluminum front baffle adds rigidity and a premium feel, and a snap-on magnetic grille keeps the front face clean when not in use. Dual sets of binding posts support bi-wiring or bi-amping for those who want to get even more from this speaker.
At 97 dB sensitivity, the RF-600 is one of the most efficient dynamic speakers in its class — it will sing loudly and cleanly with even a modestly powered receiver, yet also scales beautifully with high-quality amplification. These speakers pair naturally with other Reference 600-series components, including the RC-500 centre channel and RS-400 surrounds, for a cohesive home theatre setup, but are equally at home in a pure two-channel stereo system.
This pair is in very good condition and has been tested and inspected by our team here at Radique Audio.
Type: 2-way bass-reflex floorstanding tower, Special Limited Edition Reference Series
Country of Manufacture: USA
Tweeter: 1″ titanium diaphragm compression driver, Tractrix Horn (90° x 60°), crossover at 1,800 Hz
Woofers: Dual 6.5″ Cerametallic cone woofers with rubber surrounds
Frequency Response: 35 Hz – 23 kHz (±3 dB)
Sensitivity: 97 dB @ 2.83V / 1m
Nominal Impedance: 8 ohms compatible
Power Handling: 125W RMS / 500W peak
Enclosure: Bass-reflex with dual rear-firing ports
Inputs: Dual binding posts / bi-wire / bi-amp capable
Finish: Black ash woodgrain vinyl
Warranty (original): 5 years parts and labour
Dimensions (per speaker): (W x H x D) 8.5″ x 40.2″ x 15.4″ (21.6 x 102 x 39 cm)
Weight (per speaker): 49.1 lbs (22.3 kg)
A pair of these iconic American-made towers rarely comes to market in this condition. Whether you’re building a high-impact home theatre or a dynamic two-channel system, the RF-600’s exceptional sensitivity, horn-loaded precision and extended bass reach will exceed your expectations. Backed by Radique Audio’s 90-day warranty and perpetual trade-back policy — shop with complete confidence; asking $795.
| Weight | 104 lbs |
|---|---|
| Dimensions | 19.4 × 23 × 44.2 in |
Related Products
- >
- — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery
>Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!









