Klipsch SW-110 10″ Front-Firing Powered Subwoofer 450 Watts Peak
$395.00
Out of stock
Email when stock available
Klipsch SW-110 10″ Front-Firing Powered Subwoofer 450 Watts Peak!
This Klipsch SW-110 front-firing 10-inch powered subwoofer delivers tight, musical bass and impactful low-frequency effects, making it an excellent choice for upgrading a mid-to-upper level home theatre or stereo system in very good condition.
The SW-110 uses a highly efficient BASH digital hybrid amplifier rated at 200 watts RMS (450 watts dynamic), giving it plenty of clean power for both movies and music without sounding bloated or loose. Its non-resonant woven fiberglass 10-inch driver, combined with a front slot-ported bass-reflex cabinet, produces deep yet controlled bass that integrates well with a wide range of mains. The front slot port also makes placement more flexible, allowing the sub to work effectively closer to walls or in media furniture where rear-ported designs can struggle. Connectivity is generous, with line-level/LFE inputs, speaker-level inputs, and compatibility with the optional Klipsch WA-2 wireless kit, giving multiple ways to integrate into modern and legacy systems alike. This unit is in very good condition with only light cosmetic wear, presenting cleanly in a typical living room or dedicated theater.
Key features and specifications:
10-inch front-firing woven fiberglass woofer with rubber surround
BASH digital hybrid internal amplifier, 200 watts RMS, 450 watts dynamic peak
Bass-reflex enclosure with advanced front slot port for deep, tight bass and flexible placement
Frequency response: 28 Hz – 120 Hz (±3 dB)
Maximum acoustic output: 113 dB @ 30 Hz (1/8 space, 1 m)
Variable low-pass crossover: 50–150 Hz
Phase switch and level control for seamless integration with main speakers
Inputs: L/R line-level RCA (including LFE), L/R speaker-level binding posts, WA-2 wireless-ready port
No speaker-level outputs and no digital inputs or outputs (analog subwoofer connections only)
Auto on/off with front-panel status LED
Finish: black pica vinyl, Klipsch Reference styling
Dimensions and weight:
Dimensions: (Width x Height x Depth) 12.5 x 14 x 17 inches (318 x 356 x 432 mm)
Weight: 35 lbs (15.9 kg)
At 35 lbs with a substantial cabinet and large front slot port, this subwoofer reflects audio-first engineering and feels solid and confident in use, avoiding the “boomy box” character common to lighter designs in this range. For listeners seeking a compact yet powerful Klipsch subwoofer that can anchor a serious living room or dedicated theatre system, this SW-110 in very good condition represents strong value and a meaningful upgrade over entry-level models.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 38 lbs |
|---|---|
| Dimensions | 21 × 16.5 × 18 in |
Related Products
LG SH96TA-W Passive Subwoofer, Front-Firing, Front-Ported, Black
The passive subwoofer that shipped with LG's SH96TA home-theatre system — forward-firing driver and a front port, so it can back onto a wall or sit inside a cabinet without upsetting the tuning. It is a 3-ohm load and needs a receiver with a dedicated passive-subwoofer output; it should not go on ordinary speaker terminals. No power cord, no plate amp to age out. Good cosmetic condition.
Infinity Modulus MSW-II 12″ Powered Subwoofer – 600W Peak
Polk Audio PSW350 10″ Front-Firing Powered Subwoofer 260W
A 10-inch front-firing Dynamic Balance woofer on a 100-watt RMS amplifier — 260 watts dynamic — in a dual-rear-ported cabinet good for 25 to 180 Hz. Speaker-level in and out, stereo line inputs and an unfiltered LFE jack, with a variable 60 to 160 Hz low-pass and a phase switch. 37 lbs, black matte. Very good cosmetic condition.
Yamaha YST-SW105 Active Servo Subwoofer — Compact 100W
An 8-inch front-firing paper cone on Yamaha's Advanced Active Servo amplifier — 100 watts into 5 ohms, down to 30 Hz, from a cabinet small enough to tuck beside a bookshelf pair. Continuously variable high-cut from 50 to 150 Hz, a Music/Movie voicing switch, RCA and speaker-level inputs plus full-range pass-through outputs. Very good condition.
Yamaha SW-3 Active Servo Subwoofer — 10″ Woofer | Air Woofer Tec
Yamaha’s Active Servo Technology couples a negative-impedance drive amplifier to a Helmholtz resonator port — the Air Woofer opening — so the amplifier corrects the driver’s motion as it works. 100 watts into a 25 cm cone, rated down to 25 Hz, with a continuously variable 50–150 Hz high-cut at 24 dB per octave. Speaker-level and line inputs both. Very good condition.
Mirage LF-150 10″ Powered Subwoofer – 600W Peak, Made in Canada
A discrete MOSFET Class A/B amplifier rated 150 watts continuous and 600 watts dynamic peak, driving a 10-inch polypropylene titanium-deposit woofer on a 1.5-inch voice coil and a 28-ounce magnet. Front-ported to 23 Hz, with level, phase and crossover on the front panel instead of the back. Made in Canada, 45 lbs; very good condition.
JVC SX-PW33 Slim Tower Subwoofer — 6.5in, 100W, High-Pass Out
A tall, narrow bass column meant to stand beside a cabinet rather than in front of it — 8.25 inches across the front and unusually deep at 17, which is the trade: the depth buys back the internal volume the narrow baffle gives away, so a 6.5 inch woofer is properly loaded in a strip of floor barely wider than a hardcover book. Driven by an integrated 100 watt amplifier, with speaker-level inputs and high-pass outputs so it works with an amplifier that has no subwoofer output at all. Good condition.
