Sansui A-900P Vintage Integrated Amplifier – 70 WPC, Japan
$245.00
Seventy watts a channel into 8 ohms at 0.05% distortion, from a DC servo output stage, with frequency response running from 5 Hz to 60 kHz. Moving-magnet phono at 2.5mV, line inputs for tuner, CD and aux, and a tape monitor loop for an outboard EQ. Built in Japan between 1985 and 1986. Condition very good; inspected and tested.
Out of stock
This one has sold. Want first dibs on the next one?
We take these in regularly. Leave your name and email, and we’ll email you the moment one is listed, so you hear first. No cost, no obligation.
Email me when one is listed
Give your next receiver Bluetooth. RA-Twin II, $39.00 →
Other integrated amps we have in stock now
3 in stock · $245.00–$295.00 · all ship
Luxman F-105 Vintage Preamplifier + Power Amp – Dolby, Japan$245.00Ships
Technics SU-V76 Vintage Integrated Amplifier – 100 WPC, Japan$245.00Ships
Akai AM-U04 Vintage Integrated Amplifier – 48 WPC, Serviced$295.00Ships
Give your next receiver Bluetooth.
The RA-Twin II adds Bluetooth streaming to any vintage receiver or amp with a spare input. Phone to stereo in about a minute, and nothing on the receiver is modified.
RA-Twin II, $39.00 →Sansui A-900P 70 WPC Integrated Amplifier – Made in Japan
Made in Japan, the Sansui A-900P is a classic mid-1980s DC servo integrated amplifier from one of the most revered names in vintage Japanese hi-fi — offering a genuine 70 watts per channel, a clean minimalist silver faceplate, and the natural, musical sound for which Sansui has long been celebrated.
Produced from 1985 to 1986, the A-900P represents an interesting chapter in Sansui’s long integrated-amplifier story — a compact, well-built unit with a refined DC servo output stage design that delivers clean, low-distortion amplification across the full audio bandwidth. Specifications are honest and well-balanced: 70 watts per channel into 8 ohms, just 0.05% total harmonic distortion, and a genuinely extended frequency response from 5 Hz to 60 kHz.
Inputs include a moving magnet phono stage for turntable connection (2.5 mV sensitivity, 72 dB signal-to-noise ratio), along with line-level inputs for tuner, CD, and auxiliary sources. A tape monitor loop is provided and can be used for adding an outboard EQ or signal processor into the playback chain — a welcome touch of flexibility for listeners who like to tailor their system. The minimalist front-panel layout keeps operation intuitive and uncluttered, letting the music take centre stage.
This unit is in very good cosmetic condition and has been thoroughly inspected and tested to confirm full functionality. The silver front panel presents beautifully and pairs handsomely with vintage or contemporary components alike.
Specifications:
Design: DC servo integrated amplifier
Power output: 70 W per channel into 8 ohms (both channels driven)
Frequency response: 5 Hz – 60 kHz
Total harmonic distortion: 0.05%
Input sensitivity: 2.5 mV (MM phono), 150 mV (line)
Signal-to-noise ratio: 72 dB (MM phono), 95 dB (line)
Output: 130 mV (line)
Speaker load impedance: 8 ohms (minimum)
Phono input: Moving magnet (MM)
Tape monitor loop: Yes (suitable for outboard EQ or signal processors)
Country of manufacture: Japan
Dimensions (W x H x D): 16.9 x 4.4 x 9.8 inches (430 x 112 x 250 mm)
Weight: 13.0 lbs (5.9 kg)
A clean, Made-in-Japan vintage Sansui integrated amplifier in very good condition, ready to anchor a classic two-channel system or serve as a worthy upgrade to a budget starter amplifier.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 15 lbs |
|---|---|
| Dimensions | 13.8 × 21 × 8.4 in |
Related Products
Arcam Alpha 5 Integrated Amplifier – 40 WPC, Made in England
A British integrated amplifier from Arcam's Cambridge factory, 40 watts a side, built on the principle that anything which does not improve the sound does not go in the box.
✔️ Condition: Very Good — tested and working properly
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Harman Kardon PM640VXi Vintage Integrated Amp – 45 WPC, Japan
A 45-watt amplifier built by a company that spent the 1980s arguing the watts were the wrong thing to look at.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Marantz 1200 Vintage Integrated Amplifier – 100 WPC, Made in USA
Marantz's flagship integrated of the early seventies, built in Sun Valley, California, through our Level 2 service and playing as it should.
✔️ Very Good condition — faceplate and knobs present well, light marks of age; offered in the stock black metal case
✔️ Through our Level 2 service — a substantial round of component replacement on the bench, then bias and offset set and the amp run in
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Marantz 1070 Vintage Integrated Amplifier – 35 WPC, Serviced
A slim mid-seventies Marantz integrated amplifier, through our Level 1 service, in very good condition, with a phono stage, a three-band tone section and a microphone input on the front panel.
✔️ Very good condition — free of significant marks
✔️ Through our Level 1 service on our own bench
✔️ MM phono stage, three-band tone sliders and a front-panel mic input
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Braun Atelier A1 Vintage Integrated Amp – 55 WPC, Pre-Out, Japan
The component that makes the rest of an Atelier system work, and the one people hunting these usually look for first. 55 watts per channel into 8 ohms and 80 into 4, with a preamplifier section that separates from the power stage — engineering that is not an afterthought to the industrial design. 445 mm wide and 70 mm tall, the exact footprint of the T1 tuner and C1 deck, so the stack reads as one machined object. Made in Japan for Braun. Good condition.
