Radique Audio Bi-Wire Speaker Bridges – Banana/Spade, Set of 4

$125.00

Better bridges for bi-wire speakers: a set of four, banana at one end and spade at the other, to replace the stock jumper plates.

  • 12 in (304 mm), high-purity copper in a black and red braided sleeve
  • Gold-plated banana plugs and 3 mm spades; fits posts up to 8 mm
  • Red and black anodized housings for polarity
  • Assembled by hand; custom lengths on request
  • 1-year warranty

4 in stock (can be backordered)

Description
Radique Audio · Connectors

Better bridges for bi-wire speakers

Lost the jumper plates, or tired of the thin stock ones? Our bridges link the high and low binding posts properly: banana at one end, spade at the other, copper in between.

The short answer

Radique Audio bi-wire bridges (also called speaker jumpers) replace the metal jumper plates on speakers with two sets of binding posts. A set of four does a stereo pair. Each is 12 in (304 mm) long, with a gold-plated banana plug at one end and a gold-plated 3 mm spade at the other, high-purity copper inside a black and red braided sleeve, and red and black anodized housings for polarity. Assembled by hand in our shop; custom lengths on request.

Which connector does your gear need?

All four share the same red and black colour coding, so polarity reads at a glance whichever ends you choose. Not sure what your gear takes? Look at the terminals on the back, or send us the make and model.

Connector Made for Wire Sold as
Banana plugs Standard 5-way binding posts (most amps and speakers) 12–18 AWG 1, 2, 4, 5, 7 or 14 pairs
Spade connectors Larger binding posts, up to 8 mm 12–18 AWG 1, 2, 4 or 10 pairs
Pin connectors Spring clips and guillotine terminals 12–18 AWG 1, 2, 4 or 10 pairs
Bi-wire bridges (this one) Replacing jumper plates on bi-wire speakers Pre-made, 12 in A set of 4

What they do

Replace the jumper plates

Bi-wire speakers ship with metal plates linking the tweeter and woofer posts. When you run one cable, bridges do that job, and many people find the stock plates are the weak link.

Banana one end, spade the other

Mix and match to suit your posts and your cable: the banana plugs in, the spade clamps under.

Copper in a braided sleeve

High-purity copper conductors inside a rugged black and red braided sleeve that looks the part.

Polarity at a glance

Red and black anodized aluminum housings, easy to read behind a crowded rack.

Just plug in

No tools needed: remove the plates, fit the bridges, connect your cable.

Any length

Need them longer or shorter? We build to suit: ask for a quote.

Specifications

Radique Audio bi-wire bridges
Sold as A set of 4 matched bridges (one stereo pair of speakers)
Length 12 in (304 mm)
Ends Gold-plated banana plug · gold-plated 3 mm spade
Fits posts Up to 8 mm
Conductor High-purity copper
Sleeve Braided, black with red
Housings Anodized aluminum, colour-coded red and black
Weight 39 g (1.4 oz) per bridge
Assembly By hand, in our shop
Warranty 1 year (Radique Audio)

Why buy it from us

Audiophile quality, fair price

Radique Audio is our own line: parts we spec, test and use every day in our shop, priced the way we’d want to pay.

A 1-year warranty

Every Radique Audio product carries a 1-year warranty: if it fails under normal use within the year, we replace it at no charge.

Pick up, or have it shipped

Collect it free in Kanata by appointment, or have it shipped across Canada and internationally: enter your city and postal code on the cart page for live rates. With one of our pre-owned speakers or components, it rides along at no extra shipping cost.

Real help from people who use it

Not sure what fits? Send us the make and model of your gear and we’ll tell you, including when you don’t need anything at all.

On video

Radique Audio bridge connectors

A closer look at the bi-wire bridges and how they replace the jumper plates.

How we pack your order

Cables and connectors ship in our high-quality Radique Audio bubble packs. If your order also includes speakers or other larger gear, everything is boxed up together in our 275 lb-test double-wall packaging, as in this video.

Questions we get about this one

Do your speakers need bridges?

If they have two pairs of binding posts and you’re running one speaker cable to each, yes: something has to link the pairs. If you bi-wire (two cables per speaker), take the bridges out.

How many come in a set?

Four: two per speaker, one for the red posts and one for the black, enough for a stereo pair.

Can you make them a different length?

Yes. Tell us the length and ends you need and we’ll quote a set built to suit.

Should you bi-wire instead?

It’s an option if your speakers support it. Our Cable Builder makes bi-wire cables in House Quad, Kimber 4PR and Kimber 4TC.

What warranty does it have?

A 1-year warranty, like every Radique Audio product: if it fails under normal use within the year, we replace it at no charge. See our warranty FAQ.

What does shipping cost? Is pickup possible?

Pickup in Kanata is free, by appointment. To have it shipped, add it to your cart and enter your city and postal code on the cart page: you’ll see live carrier rates before you commit. We ship across Canada and internationally. Buying it with one of our pre-owned speakers or components? Then it rides along in the same order at no extra shipping cost.

Do you ship to the United States?

Yes. On Radique Audio products we add the US import duties and fees at checkout and prepay them for you, so there’s nothing to pay at delivery.

Rather we built the whole cable?

Our Custom Speaker Cable Builder makes speaker cable to order, in any length, with these connectors on either end.

$125.00
Additional information
Weight.44 lbs
Dimensions10 × 8 × 1 in
About brand
Radique Audio · our own line since 2020
Radique Audio is our own line, made for the vintage hi-fi we sell:
  • Made to suit vintage gear
  • Used every day in our own shop
  • Speaker cable assembled by hand
  • Audiophile quality without the audiophile price

Shop by family: Bluetooth & electronics · Speaker cables · Connectors · Gold & Black Series cables · Cabinets & stands · Gift coupons

Radique Audio is the house brand of Radique, the used and vintage hi-fi specialist. It began in 2020 with the original RA-Twin, a pocket-sized Bluetooth adapter that let our customers stream from their phones to the vintage receivers and amps we sell. Today the line runs from the RA-Twin II and the RA-Mini amplifier to Gold Series and Black Series cables, gold-plated connectors, hand-assembled speaker cable, new cherrywood cabinets for vintage Marantz, wood speaker stands and our magenta felt pads. We've sold well over 1,200 Radique Audio products so far. Our electronics, cables and connectors carry a one-year warranty, and our speaker stands carry five years.

Our five best sellers so far: the RA-Twin Bluetooth adapter (now the RA-Twin II), our gold-plated banana plugs, Gold Series RCA interconnects, our pin connectors and the Gold Series 3.5 mm to dual RCA cable.

The Radique Audio story, 2020 to today

It started with Bluetooth. Our first Radique Audio product was the original RA-Twin, in 2020: a small adapter that brings phone streaming to any stereo with a spare input, which is most of the vintage gear we sell. It became our best-selling product, and in 2025 the RA-Twin II took over with Bluetooth 5.4, three modes and up to 10 hours per charge.

Cables and connectors. Our Gold Series and Black Series cables followed in the summer of 2020, and our gold-plated banana plugs and pin connectors by the end of that year. Gold Series subwoofer cables came in 2021, the Black Series Toslink optical and Gold Series 1/4 to 1/8 inch TRS cables in 2022, our spade connectors in 2024 and the bi-wire speaker bridges in 2025.

The RA-Mini, our stands and our shirts. Our compact RA-Mini Class D amplifier, our wood speaker stands and the Radique Audio T-shirt all date back to the end of 2020, and the RA-USB charger joined the RA-Twin II in 2025.

Cherry cabinets for Marantz. Many vintage Marantz components were sold without their wood case. In 2026 we added new cabinets, built by our master woodworker in genuine Ottawa Valley cherrywood veneer over a stable particle board core: the WC-22 style for the 2220 through 2285B receivers, then the WC-10 style for 16 slim-chassis models such as the 1060, 1070 and 112, with more models coming. We build one-off cherry cabinets for other components too: see Ottawa Valley Cherry Cabinetry.

Speaker cable, made to order. In 2026 we opened the Custom Speaker Cable Builder (pick the cable, the length and each connector, and the price updates as you go) and added small spade terminations and small spade adapters for vintage gear whose terminals are too small for ordinary spades.

Which Radique Audio product do I need?
If you want to…Look at
Stream from your phone to a vintage stereoRA-Twin II in RX mode, or the RX Bundle with our shielded Gold Series 3.5 mm to dual RCA cable
Hear your stereo or TV on Bluetooth headphonesRA-Twin II in TX mode, or the TX Bundle for a vintage amp's headphone jack
Drive a pair of passive speakers in a small roomRA-Mini: 50 W per channel into 4 Ω, Bluetooth, RCA, 3.5 mm, USB and microSD
Keep the RA-Twin II charged at the stereoRA-USB, which plugs into the accessory outlet on the back of many vintage amps
Connect to standard five-way binding postsbanana plugs or spade connectors
Connect to spring clipspin connectors, which flex instead of levering on old terminals
Connect to the small screw terminals on vintage gearsmall spade adapters, or House CCA cable with small spade ends
Get speaker cable in the length you needthe Custom Speaker Cable Builder
Bi-wire, or replace bi-wire jumper platesQuad bi-wire speaker cables and our bi-wire speaker bridges
Link components or run a subwooferGold Series RCA interconnect, subwoofer cable or Y-splitter
Connect an optical digital outputBlack Series Toslink cable
Dress a vintage Marantz that lost its caseWC-22 style or WC-10 style cherrywood cabinet
Lift bookshelf speakers to ear heightspeaker stands, or a single stand for a center speaker
Protect a shelf under your componentsmagenta felt pads
Give it as a gifta digital gift coupon, good toward anything on radique.com

Still not sure? Email sales@radique.com with your gear, and we'll tell you what fits, or that you don't need anything at all.

What makes it Radique Audio

Made to suit vintage gear. Our Gold Series RCA plugs are slim and gentle on old jacks. Our pin connectors are made for spring clips, our small spades for the small screw terminals on vintage receivers and speakers, and the RA-Twin II plugs into the inputs almost every classic receiver and amp already has.

Used every day in our own shop. We use our banana plugs, cables and felt pads on the gear we test and demo every day, and our magenta felt pads go under the components we sell.

Built properly. Our banana plugs and spades hold the wire with two set screws, not one. Our Gold Series cables carry aluminum foil and braided copper shields under a gold cotton mesh jacket. Our speaker cables are assembled by hand, with heat-shrink reinforcing the ends and splits. Our stands are dowelled and glued maple, with no nails or screws.

Backed by us. Our electronics, cables and connectors carry a one-year warranty, and our speaker stands carry five years. The RA-Twin II and RA-Mini come with clear online manuals in English and French, and when you have a question, you email the people who chose the product: sales@radique.com.

What our customers say

“I just received my RA-Twin II today… I can't tell you enough how thrilled I am with this little but mighty product. I am using it to stream music from my laptop's 400+ GB collection to my Marantz 2220b, also sourced through the wonderful people at Radique. You people rock — keep up the good work!”

Kevin Spracklin, RA-Twin II · Google Reviews

“It is just a cable, a simple thing. Still, flawless build solves the irritating part of my desktop setup. I don't see the cable to the DAC, but I know it is there. And now I know that it is pretty. This matters.”

Ingvarr, Radique Audio Toslink Cable · Etsy

“I have never come across receivers with new cherry cabinets like this… like showroom new. Everything was exceptional!”

Peter, Pioneer SX-780 in our cherry cabinet · Etsy

More on our Customer Reviews page.