Insignia NS-SP211 2-Way Satellite Speakers, Shielded
$45.00
A 3-inch woofer and a half-inch PEI dome in a sealed cabinet, 150 Hz to 20 kHz, 8 ohms, 80 watts peak. Keyhole slots are moulded into the back so they hang on a screw in any orientation without a bracket, and a detachable rubber base is included for shelf use. Magnetically shielded. Good cosmetic condition, tested.
1 in stock
Insignia NS-SP211 2-Way Satellite Speakers with integrated keyhole wall mounts
A compact, versatile pair of 2-way satellite speakers ideally suited for home theatre surround duty or desktop use, the Insignia NS-SP211 offers clean, clear audio in a slim, space-saving cabinet with convenient integrated keyhole wall mounts.
The NS-SP211 features a 3-inch woofer paired with a 0.5-inch PEI dome tweeter for smooth, balanced sound across the mid and high frequency range. Magnetic shielding makes these speakers safe to position near televisions and displays without interference. The built-in keyhole slots on the rear of each enclosure allow for quick, tool-friendly wall mounting in virtually any orientation — ideal for getting clean speaker placement without the need for separate brackets. A detachable rubber base is also included for shelf or desktop placement. This pair has been thoroughly inspected and tested to confirm full functionality and is in good cosmetic condition.
These are an excellent, no-fuss pick for anyone building or expanding a budget surround system, adding rear or height channels, or looking for compact bookshelf speakers for a secondary room.
Specifications:
Design: Two-way, sealed, wall/shelf-mount satellite
Low-frequency driver: 3 in. (76 mm) woofer
High-frequency driver: 0.5 in. (13 mm) PEI dome tweeter
Frequency response: 150 Hz – 20 kHz
Nominal impedance: 8 ohms
Peak power handling: 80 W
Magnetic shielding: Yes
Connections: Spring clip terminals
Mounting: Integrated keyhole wall mount; detachable rubber base included
Dimensions (per speaker, W x H x D): 3.75 x 9.9 x 4.25 inches (95 x 251 x 108 mm)
Weight (per speaker): 4.3 lbs (2.0 kg)
A clean, practical pair of satellite speakers ready to fill out your surround setup — grab them and get listening right away.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 10 lbs |
|---|---|
| Dimensions | 8.25 × 13.5 × 14 in |
Related Products
KEF HTS2001.3 Egg Satellite Speakers – Iconic Uni-Q
The Uni-Q array puts a 19 mm aluminium dome at the acoustic centre of a 100 mm cone, so each speaker behaves as one point source and every seat gets the same picture. The enclosure is vented cast aluminium, rigid and acoustically inert. 88 dB, 8 ohms, 4.4 lbs each, with the integrated adjustable stand that doubles as a wall bracket. Four speakers here as two matched pairs, all very good condition.
Paradigm Cinema 100 CT Satellites speakers, Gloss Black
A sealed two-way in a sculpted mineral-filled polymer cabinet — a 1-inch S-PAL satin-anodised aluminium dome, the same tweeter technology Paradigm uses much further up the range, over a 3.5-inch mineral-filled polypropylene mid/bass. The original removable shelf-stand bases are fitted and tilt the drivers up at a seated listener. 88 dB in room, 8 ohms, 15 to 100 watts. Built in Canada. Good cosmetic condition.
B&W Solid HCM1 Compact Satellite Speakers with Integrated Stands
A sealed two-way from B&W's Rock Solid series — a 4-inch fibre cone woofer and a polycarbonate dome in a polycarbonate cabinet chosen to kill resonance without adding mass. 90 dB, so modest amplification is enough, and magnetically shielded for desk use. Each speaker comes on its integrated stand bracket. Mark runs a pair as his office near-fields. Cosmetics good, 7 out of 10; tested.
Boston Acoustics Micro 90X Satellite Speakers — Made in USA
Die-cast aluminum cabinets rather than the usual plastic — six pounds each for a satellite this size, which is the point of them. A 1-inch aluminum dome with Aperture Modal Damping crosses at 3,800 Hz to a 3.5-inch copolymer woofer; 120 Hz to 20 kHz, 89 dB, 8 ohms, so they want a subwoofer under them. Keyhole brackets fitted, magnetically shielded. Made in USA. Very good condition.
KEF HTS1001 Uni-Q Satellite Speakers Black (Single)
KEF's Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of the 3-inch mid-bass, so dispersion stays even off-axis and the far seat hears what the middle seat does. Sealed cast aluminium cabinet in high-gloss black, magnetically shielded, 120 Hz to 22 kHz, 86 dB, 10 to 100 watts. Terminals take bare wire or pin connectors. Very good cosmetic condition.
KEF HTS1001 Uni-Q Satellite Speakers Black Pair
KEF’s Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of a 3-inch mid-bass cone, so the pair behaves as a single source and the tonal balance holds across the room rather than in one chair. Sealed cast aluminium enclosures, 120 Hz to 22 kHz, 86 dB, magnetically shielded. Very good cosmetic condition.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite – Made in Canada
Both drivers fire upward into spoon-shaped reflectors Mirage calls OMNIGUIDEs, throwing sound through a full 360 degrees with a deliberate bias toward the front — which is what takes the sweet spot off a single chair. This is the original version at a genuine 7 lbs each, with a cast aluminium baffle and butyl rubber surrounds rather than foam. Built in Canada; condition very good.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
PSB VisionSound VS300 Aluminum On-Wall Speaker
An on-wall speaker engineered as one rather than adapted into one. It shares the tweeter, terminals and crossover of PSB's VS400 floorstander, but the port was moved to the front so the cabinet can sit flat to a wall without the wall changing what it does — and a rear switch selects NORMAL or ON-WALL, filling the 400 to 500 Hz dip that hard mounting creates. Extruded aluminium, built in Pickering, Ontario. Graded Excellent or Very Good; the only thing separating the two is a single Tic Tac-sized hole at the extreme edge of one grille frame.
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.
