Quality Paradigm Cinema 90 v3 Satellite Speakers in Black
$95.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Other surround speakers we have in stock now
3 in stock · $55.00–$245.00 · all ship
Single Paradigm Satellite Speaker Cinema 70 v3$55.00Ships
4-Driver, Surround Wall mounted Paradigm Speakers Cinema ADP V3$145.00Ships
Paradigm Cinema 100 CT Satellites speakers, Gloss Black$245.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →Sleek yet elegantly simple D-shaped design. Between the 60mm bracket holes on the rear and the mere 3.3-pound weight, you can easily and unobtrusively wall-mount these speakers. All the speakers are magnetically shielded, so you can place them near your TV without worry, and they have gold-plated binding posts that accept bare wire, spades, and banana plugs.
Cinema 90 v3 Specifications
Design: 2-driver, 2-way acoustic suspension, mineral-filled polymer enclosure, MagneShield™
Crossover: 3rd-order electro-acoustic at 2.3kHz
Frequency Response On-Axis: ±2dB from 110 Hz – 20kHz
Frequency Response 30° Off-Axis: ±2dB from 110 Hz – 15 kHz
High Frequency Driver: 25mm (1 in) PTD™ dome, neodymium magnet
Mid/Bass Frequency Driver: 115mm (4-1/2 in) ICP™ cone
Low Frequency Extension: 75 Hz (DIN)
Sensitivity Room / Anechoic: 88 dB / 85 dB
Impedance: Compatible with 8 ohms
Suitable Amplifier Power Range: 15 – 100 watts
Weight: 6.8 lbs. (3.2 kg), Dimensions HxWxD: 7.75″ × 4.625″ × 5.75″
Asking just $95 for the pair.
| Weight | 16 lbs |
|---|---|
| Dimensions | 9.75 × 15.2 × 11.75 in |
Related Products
KEF HTS1001 Uni-Q Satellite Speakers Black Pair
KEF’s Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of a 3-inch mid-bass cone, so the pair behaves as a single source and the tonal balance holds across the room rather than in one chair. Sealed cast aluminium enclosures, 120 Hz to 22 kHz, 86 dB, magnetically shielded. Very good cosmetic condition.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite – Made in Canada
Both drivers fire upward into spoon-shaped reflectors Mirage calls OMNIGUIDEs, throwing sound through a full 360 degrees with a deliberate bias toward the front — which is what takes the sweet spot off a single chair. This is the original version at a genuine 7 lbs each, with a cast aluminium baffle and butyl rubber surrounds rather than foam. Built in Canada; condition very good.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
PSB VisionSound VS300 Aluminum On-Wall Speaker
An on-wall speaker engineered as one rather than adapted into one. It shares the tweeter, terminals and crossover of PSB's VS400 floorstander, but the port was moved to the front so the cabinet can sit flat to a wall without the wall changing what it does — and a rear switch selects NORMAL or ON-WALL, filling the 400 to 500 Hz dip that hard mounting creates. Extruded aluminium, built in Pickering, Ontario. Graded Excellent or Very Good; the only thing separating the two is a single Tic Tac-sized hole at the extreme edge of one grille frame.
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.
Insignia NS-SP211 2-Way Satellite Speakers, Shielded
A 3-inch woofer and a half-inch PEI dome in a sealed cabinet, 150 Hz to 20 kHz, 8 ohms, 80 watts peak. Keyhole slots are moulded into the back so they hang on a screw in any orientation without a bracket, and a detachable rubber base is included for shelf use. Magnetically shielded. Good cosmetic condition, tested.
Paradigm Cinema 100 CT Satellites speakers, Gloss Black
A sealed two-way in a sculpted mineral-filled polymer cabinet — a 1-inch S-PAL satin-anodised aluminium dome, the same tweeter technology Paradigm uses much further up the range, over a 3.5-inch mineral-filled polypropylene mid/bass. The original removable shelf-stand bases are fitted and tilt the drivers up at a seated listener. 88 dB in room, 8 ohms, 15 to 100 watts. Built in Canada. Good cosmetic condition.
B&W Solid HCM1 Compact Satellite Speakers with Integrated Stands
A sealed two-way from B&W's Rock Solid series — a 4-inch fibre cone woofer and a polycarbonate dome in a polycarbonate cabinet chosen to kill resonance without adding mass. 90 dB, so modest amplification is enough, and magnetically shielded for desk use. Each speaker comes on its integrated stand bracket. Mark runs a pair as his office near-fields. Cosmetics good, 7 out of 10; tested.
KEF HTS1001 Uni-Q Satellite Speakers Black (Single)
KEF's Uni-Q array puts a 0.6-inch aluminium dome at the acoustic centre of the 3-inch mid-bass, so dispersion stays even off-axis and the far seat hears what the middle seat does. Sealed cast aluminium cabinet in high-gloss black, magnetically shielded, 120 Hz to 22 kHz, 86 dB, 10 to 100 watts. Terminals take bare wire or pin connectors. Very good cosmetic condition.
