Radique 16 AWG Quad Bi-Wire Speaker Cables – Grey, 8 ft Pair
$110.00
A matched pair of bi-wire speaker cables, 8 ft per cable: four colour-coded 16 AWG conductors in a slim grey jacket, terminated with our own gold-plated Radique Audio banana plugs.
✔️ Four 16 AWG conductors per cable, colour-coded
✔️ 2 plugs at the amp, 4 at each speaker
✔️ Heat-shrink at every split, gold-plated Radique Audio banana plugs
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
1 in stock
A matched pair of bi-wire speaker cables, 8 ft per cable: four colour-coded 16 AWG conductors in a slim grey ECI Electrocom jacket, terminated with our own gold-plated Radique Audio banana plugs.
What it is
Many good speakers have two pairs of binding posts on the back: one pair feeds the woofer section, the other the tweeter section, joined at the factory by metal jumpers or bridges. Bi-wiring removes the jumpers and runs a separate pair of conductors from the amplifier to each set of posts, so the two sections no longer share a single run of cable.
These cables are built for exactly that. At the amplifier end, each cable has two banana plugs, red and black, each one joining a pair of conductors. At the speaker end the cable splits into four conductors with four banana plugs: one red and black pair for the upper posts and one for the lower posts. One amplifier, two runs per speaker, no jumpers.
How it is built
Each cable carries four 16 AWG conductors, colour-coded red, black, yellow and green, inside a round grey jacket from ECI Electrocom, printed CSA CMG and FT4. The jacket is slim and plain, so the run sits quietly along a baseboard. Every split is finished with heat-shrink and every termination is a gold-plated Radique Audio banana plug, colour-coded red and black so polarity reads at a glance. The pair comes with a Radique Audio hook-and-loop tie.
If you need something different
Single-wiring a bi-wire speaker instead? Our Radique Audio Bi-Wire Speaker Bridges replace the factory jumpers in seconds. Prefer a braided sleeve? Our Radique 16 AWG Quad Bi-Wire Speaker Cables come braided in 5 ft and 10 ft. Need another length or termination? Our Custom Speaker Cable Builder makes bi-wire pairs to order in House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC, with bare wire, banana, spade, small spade or pin ends.
Bi-wiring in one slim, tidy run.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year. Cables like these ship in our high-quality Radique Audio bubble packs. If you order them with speakers or other larger gear, everything is boxed up together. Live shipping rates for your address are calculated at checkout. Includes Radique Audio’s Bumper-to-Bumper Warranty. Available for audition by appointment in Kanata.
Radique Grey Bi-Wire Speaker Cables Specifications
- Configuration: matched pair, bi-wire (2 ends at the amplifier, 4 at each speaker)
- Conductors: four per cable, 16 AWG, colour-coded red, black, yellow and green
- Jacket: grey, ECI Electrocom, printed CSA CMG and FT4
- Length: 8 ft (2.4 m) per cable
- Ends: Radique Audio gold-plated banana plugs, red and black, 6 per cable
- Reinforcement: heat-shrink at every split
🔌 Speaker Cable, Bi-Wiring and Connectors
The dual posts here take bare wire, spades, pins or bananas, and they mean you can bi-wire or bi-amp if you ever want to. Our bi-wire speaker bridges replace the factory straps with something considerably better made. We hand-build speaker cable here in any length you need on our Custom Speaker Cable Builder, terminated with our own gold-plated banana plugs or spade connectors. 👉
🔌 Speaker Cable, Built on Our Own Bench
The speaker terminals here take banana plugs — the quickest and tidiest connection there is, and the one you want if anything ever gets moved. We hand-build speaker cable here in any length you need on our Custom Speaker Cable Builder, terminated with our own gold-plated banana plugs. If you already have cable you are happy with, we sell the plugs on their own. 👉
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 8 × 10 × 2 in |
You may also like…
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
Radique 16 AWG Quad Bi-Wire Speaker Cables – Braided, 5 or 10 ft
Bi-wiring, done properly: our 16 AWG OFC bi-wire speaker cables in 5 ft or 10 ft pairs: four conductors per cable under a braided sleeve, Radique Audio banana plugs at both ends.
- Hand-assembled in Ottawa
- 2 plugs at the amp, 4 at each speaker
- Braided sleeve, heat-shrink at every split
- Choose 5 or 10 ft
- Brand new
- 1-year warranty
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
Related Products
- Four 14 AWG OFC conductors, doubled to 11 AWG per leg
- Discreet white jacket printed CM/CL2
- Gold-plated Radique Audio banana plugs
- Bi-wire capable to order; hand-assembled in our shop
- 1-year warranty
- Radique Audio banana plugs to small spades (forks) for #10 / M5 posts
- Small spades crimped and double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
- Radique Audio pins for spring clips and guillotine terminals
- Small spades (forks) for #10 / M5 posts, double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
- Hand-assembled in Ottawa
- 2 plugs at the amp, 4 at each speaker
- Braided sleeve, heat-shrink at every split
- Choose 5 or 10 ft
- Brand new
- 1-year warranty
- Gold-plated banana plugs to flexible gold-plated pins
- Dual set screws and colour-coded jackets at both ends
- Colour-matched heat-shrink at every joint
- Any combination of ends on request
- 1-year warranty
- Radique Audio banana plugs, colour-coordinated
- Shrink tubing reinforces both ends and the split
- Choose 3, 5 or 7 ft
- Brand new
- 1-year warranty
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
- Radique Audio banana plugs at the amplifier, bare wire at the speaker
- Kimber’s woven four-conductor 4PR braid
- From an authorized Canadian Kimber Kable dealer
- Free shipping within Canada
- 1-year warranty
Radique House CCA Speaker Cables, 10 ft Pair – Bare Wire Ends
Radique House Quad Speaker Cables, 10 ft Pair – Banana Ends
Twice the copper, out of sight: a 10 ft pair of four-conductor oxygen-free copper speaker cable, banana plugs at both ends.
Radique House CCA Cables, 10 ft Pair – Banana to Small Spade
For vintage posts too small for spades: a 10 ft House CCA pair, banana plugs to small spades.
Radique House CCA Cables, 10 ft Pair – Pin to Small Spade
Vintage to vintage, no bare wire: a 10 ft House CCA pair, pin connectors to small spades.
Kimber 4PR Speaker Cables, 2.4 m (8 ft) Pair — Pin to Banana
A matched 2.4 m (8 ft) pair of Kimber Kable 4PR, hand-terminated in our shop: Radique Audio pins at the amplifier, banana plugs at the speakers.
✔️ New — hand-assembled in Ottawa by an authorized Kimber Kable dealer
✔️ Flexible pins for spring-clip terminals, bananas for binding posts
✔️ Matched pair, 2.4 m (8 ft) per cable
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
Radique 16 AWG Quad Bi-Wire Speaker Cables – Braided, 5 or 10 ft
Bi-wiring, done properly: our 16 AWG OFC bi-wire speaker cables in 5 ft or 10 ft pairs: four conductors per cable under a braided sleeve, Radique Audio banana plugs at both ends.
Radique House CCA Speaker Cables – Banana to Pin, 7 or 25 ft
Banana to pin, 7 or 25 feet: a pair in our red and black House CCA, 7 ft in stock or 25 ft built to order.
Radique House CCA Speaker Cables – Banana Plugs, 3, 5 or 7 ft
Short runs, done properly: a pair of House CCA speaker cables, 3, 5 or 7 ft, banana plugs at both ends.
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
Kimber 4PR Speaker Cables, 2 m Pair – Banana to Bare Wire
The cable that converts sceptics: a matched 2 m pair of genuine Kimber Kable 4PR, hand-terminated by us.
