Radique House CCA Speaker Cables, 10 ft Pair – Bare Wire Ends
$40.00
Bare wire at both ends: a matched 10 ft pair of our House CCA speaker cable.
- Copper-clad aluminum in a red-and-black jacket
- Fits any binding post, spring clip or screw terminal
- Heat-shrink reinforced and colour-coordinated at every joint
- Hand-assembled in our shop
- 1-year warranty
1 in stock
Bare wire: fits everything
A matched ten-foot pair of our House CCA speaker cable, finished as bare wire at both ends: the most universal termination there is.
The short answer
Radique House CCA speaker cables, 10 ft pair, bare wire is a matched pair of our entry-level copper-clad aluminum speaker cable in the red-and-black jacket, 10 ft (3.05 m) per cable, single-wire, finished as bare wire at both ends. Every termination and joint is heat-shrink reinforced and colour-coordinated. Bare wire goes into any binding post, spring clip or screw terminal without an adaptor.
Our speaker cables
Every pair is hand-assembled in our shop, with heat-shrink at every termination and joint, colour-coordinated so polarity reads at a glance. Need a length or ends we don’t stock? The Cable Builder makes it to order.
| Cable | Conductor | Ends | Length |
|---|---|---|---|
| House CCA pair (this one) | Copper-clad aluminum, red and black | Bare wire both ends | 10 ft |
| House CCA pair | Copper-clad aluminum, red and black | Banana to small spade | 10 ft |
| House CCA pair | Copper-clad aluminum, red and black | Pin to small spade | 10 ft |
| House Quad pair | Four 14 AWG oxygen-free copper, white | Banana both ends | 10 ft |
| 16 AWG Quad bi-wire pair | Four 16 AWG oxygen-free copper, braided sleeve | 2 bananas at the amp, 4 at each speaker | 5 or 10 ft |
| House CCA pair | Copper-clad aluminum, red and black | Banana both ends | 3, 5 or 7 ft |
| House CCA pair | Copper-clad aluminum, red and black | Banana to pin | 7 or 25 ft |
| Kimber 4PR pair | Kimber Kable 4PR woven braid | Banana to bare wire | 2 m |
| Custom Speaker Cable Builder | House CCA, OFC or Quad; Kimber 4PR or 4TC | Any, at either end | Any length |
What you get
House CCA
Our entry-level conductor: copper-clad aluminum in the familiar red-and-black jacket. Clean, reliable and honest about what it is.
Why bare wire
It goes into any binding post, any spring clip, any screw terminal, without an adaptor. If your amplifier and speakers disagree about connectors, bare wire ends the argument.
Ten feet a side
Enough slack for most rooms, so you can move the furniture without restringing the system.
Built to be handled
Heat-shrink at every termination and joint, colour-coordinated, with the splits reinforced.
Ready today
A stock item, assembled by hand and ready to ship or collect: no build time.
Or made to order
Prefer House OFC, House Quad or Kimber, or other ends? The Cable Builder makes it.
Specifications
| Radique House CCA cable | |
|---|---|
| Conductor | Radique House CCA, copper-clad aluminum, red and black jacket |
| Length | 10 ft (3.05 m) per cable |
| Configuration | Matched pair, single-wire |
| End A (amplifier) | Bare wire |
| End B (speaker) | Bare wire |
| Reinforcement | Heat-shrink at every termination and joint, colour-coordinated |
| Assembly | By hand, in our shop |
| Warranty | 1 year (Radique Audio) |
Why buy it from us
Hand-assembled in our shop
Every termination and joint is heat-shrink reinforced and colour-coordinated, and the splits are reinforced against the handling that kills lesser cable.
A 1-year warranty
Every Radique Audio product carries a 1-year warranty: if it fails under normal use within the year, we replace it at no charge.
Pick up, or have it shipped
Collect it free in Kanata by appointment, or have it shipped across Canada and internationally: enter your city and postal code on the cart page for live rates. With one of our pre-owned speakers or components, it rides along at no extra shipping cost.
Real help from people who use it
Not sure what fits? Send us the make and model of your gear and we’ll tell you, including when you don’t need anything at all.
On video
How we pack your order
Cables and connectors ship in our high-quality Radique Audio bubble packs. If your order also includes speakers or other larger gear, everything is boxed up together in our 275 lb-test double-wall packaging, as in this video.
Meet the people behind Radique Audio
Our introduction video: who we are, how we work, and why we started making our own gear.
Questions we get about this one
Can you add plugs later?
Yes. Our banana plugs, spades and pins fit with a small screwdriver, or order the pair ready-terminated from the Cable Builder.
Is 10 ft per cable enough?
Ten feet per cable gives most people enough slack to move the furniture without restringing the system. For another length, the Cable Builder makes it to order.
What is copper-clad aluminum?
An aluminum core with a copper skin. It is our entry-level conductor: clean and reliable for everyday hi-fi and home theatre, where the money is better spent elsewhere in the system. For oxygen-free copper, see House Quad or House OFC in the Cable Builder.
What warranty does it have?
A 1-year warranty, like every Radique Audio product: if it fails under normal use within the year, we replace it at no charge. See our warranty FAQ.
What does shipping cost? Is pickup possible?
Pickup in Kanata is free, by appointment. To have it shipped, add it to your cart and enter your city and postal code on the cart page: you’ll see live carrier rates before you commit. We ship across Canada and internationally. Buying it with one of our pre-owned speakers or components? Then it rides along in the same order at no extra shipping cost.
Do you ship to the United States?
Yes. On Radique Audio products we add the US import duties and fees at checkout and prepay them for you, so there’s nothing to pay at delivery.
Need a different length or ends?
Our Custom Speaker Cable Builder makes it to order: five cables, any length, any ends, with live pricing as you go.
| Weight | 4 lbs |
|---|---|
| Dimensions | 8 × 10 × 2 in |
- Made to suit vintage gear
- Used every day in our own shop
- Speaker cable assembled by hand
- Audiophile quality without the audiophile price
Shop by family: Bluetooth & electronics · Speaker cables · Connectors · Gold & Black Series cables · Cabinets & stands · Gift coupons
Radique Audio is the house brand of Radique, the used and vintage hi-fi specialist. It began in 2020 with the original RA-Twin, a pocket-sized Bluetooth adapter that let our customers stream from their phones to the vintage receivers and amps we sell. Today the line runs from the RA-Twin II and the RA-Mini amplifier to Gold Series and Black Series cables, gold-plated connectors, hand-assembled speaker cable, new cherrywood cabinets for vintage Marantz, wood speaker stands and our magenta felt pads. We've sold well over 1,200 Radique Audio products so far. Our electronics, cables and connectors carry a one-year warranty, and our speaker stands carry five years.
Our five best sellers so far: the RA-Twin Bluetooth adapter (now the RA-Twin II), our gold-plated banana plugs, Gold Series RCA interconnects, our pin connectors and the Gold Series 3.5 mm to dual RCA cable.
The Radique Audio story, 2020 to today
It started with Bluetooth. Our first Radique Audio product was the original RA-Twin, in 2020: a small adapter that brings phone streaming to any stereo with a spare input, which is most of the vintage gear we sell. It became our best-selling product, and in 2025 the RA-Twin II took over with Bluetooth 5.4, three modes and up to 10 hours per charge.
Cables and connectors. Our Gold Series and Black Series cables followed in the summer of 2020, and our gold-plated banana plugs and pin connectors by the end of that year. Gold Series subwoofer cables came in 2021, the Black Series Toslink optical and Gold Series 1/4 to 1/8 inch TRS cables in 2022, our spade connectors in 2024 and the bi-wire speaker bridges in 2025.
The RA-Mini, our stands and our shirts. Our compact RA-Mini Class D amplifier, our wood speaker stands and the Radique Audio T-shirt all date back to the end of 2020, and the RA-USB charger joined the RA-Twin II in 2025.
Cherry cabinets for Marantz. Many vintage Marantz components were sold without their wood case. In 2026 we added new cabinets, built by our master woodworker in genuine Ottawa Valley cherrywood veneer over a stable particle board core: the WC-22 style for the 2220 through 2285B receivers, then the WC-10 style for 16 slim-chassis models such as the 1060, 1070 and 112, with more models coming. We build one-off cherry cabinets for other components too: see Ottawa Valley Cherry Cabinetry.
Speaker cable, made to order. In 2026 we opened the Custom Speaker Cable Builder (pick the cable, the length and each connector, and the price updates as you go) and added small spade terminations and small spade adapters for vintage gear whose terminals are too small for ordinary spades.
Which Radique Audio product do I need?
| If you want to… | Look at |
|---|---|
| Stream from your phone to a vintage stereo | RA-Twin II in RX mode, or the RX Bundle with our shielded Gold Series 3.5 mm to dual RCA cable |
| Hear your stereo or TV on Bluetooth headphones | RA-Twin II in TX mode, or the TX Bundle for a vintage amp's headphone jack |
| Drive a pair of passive speakers in a small room | RA-Mini: 50 W per channel into 4 Ω, Bluetooth, RCA, 3.5 mm, USB and microSD |
| Keep the RA-Twin II charged at the stereo | RA-USB, which plugs into the accessory outlet on the back of many vintage amps |
| Connect to standard five-way binding posts | banana plugs or spade connectors |
| Connect to spring clips | pin connectors, which flex instead of levering on old terminals |
| Connect to the small screw terminals on vintage gear | small spade adapters, or House CCA cable with small spade ends |
| Get speaker cable in the length you need | the Custom Speaker Cable Builder |
| Bi-wire, or replace bi-wire jumper plates | Quad bi-wire speaker cables and our bi-wire speaker bridges |
| Link components or run a subwoofer | Gold Series RCA interconnect, subwoofer cable or Y-splitter |
| Connect an optical digital output | Black Series Toslink cable |
| Dress a vintage Marantz that lost its case | WC-22 style or WC-10 style cherrywood cabinet |
| Lift bookshelf speakers to ear height | speaker stands, or a single stand for a center speaker |
| Protect a shelf under your components | magenta felt pads |
| Give it as a gift | a digital gift coupon, good toward anything on radique.com |
Still not sure? Email sales@radique.com with your gear, and we'll tell you what fits, or that you don't need anything at all.
What makes it Radique Audio
Made to suit vintage gear. Our Gold Series RCA plugs are slim and gentle on old jacks. Our pin connectors are made for spring clips, our small spades for the small screw terminals on vintage receivers and speakers, and the RA-Twin II plugs into the inputs almost every classic receiver and amp already has.
Used every day in our own shop. We use our banana plugs, cables and felt pads on the gear we test and demo every day, and our magenta felt pads go under the components we sell.
Built properly. Our banana plugs and spades hold the wire with two set screws, not one. Our Gold Series cables carry aluminum foil and braided copper shields under a gold cotton mesh jacket. Our speaker cables are assembled by hand, with heat-shrink reinforcing the ends and splits. Our stands are dowelled and glued maple, with no nails or screws.
Backed by us. Our electronics, cables and connectors carry a one-year warranty, and our speaker stands carry five years. The RA-Twin II and RA-Mini come with clear online manuals in English and French, and when you have a question, you email the people who chose the product: sales@radique.com.
What our customers say
“I just received my RA-Twin II today… I can't tell you enough how thrilled I am with this little but mighty product. I am using it to stream music from my laptop's 400+ GB collection to my Marantz 2220b, also sourced through the wonderful people at Radique. You people rock — keep up the good work!”
Kevin Spracklin, RA-Twin II · Google Reviews
“It is just a cable, a simple thing. Still, flawless build solves the irritating part of my desktop setup. I don't see the cable to the DAC, but I know it is there. And now I know that it is pretty. This matters.”
Ingvarr, Radique Audio Toslink Cable · Etsy
“I have never come across receivers with new cherry cabinets like this… like showroom new. Everything was exceptional!”
Peter, Pioneer SX-780 in our cherry cabinet · Etsy
More on our Customer Reviews page.
You may also like…
Radique Audio Banana Plugs – Gold-Plated, Dual Set Screws
Banana plugs that stay put: gold-plated, with two set screws holding the wire instead of one.
- Six-leaf gold-plated springs for a tight fit in the binding post
- Full-length non-conductive jackets, colour-coded red and black
- Fits 12 to 18 AWG speaker wire; 19.4 g a pair
- Packs of 1, 2, 4, 5, 7 or 14 pairs
- 1-year warranty
Radique House Quad Speaker Cables, 10 ft Pair – Banana Ends
Twice the copper, out of sight: a 10 ft pair of four-conductor oxygen-free copper speaker cable, banana plugs at both ends.
- Four 14 AWG OFC conductors, doubled to 11 AWG per leg
- Discreet white jacket printed CM/CL2
- Gold-plated Radique Audio banana plugs
- Bi-wire capable to order; hand-assembled in our shop
- 1-year warranty
Radique House CCA Cables, 10 ft Pair – Banana to Small Spade
For vintage posts too small for spades: a 10 ft House CCA pair, banana plugs to small spades.
- Radique Audio banana plugs to small spades (forks) for #10 / M5 posts
- Small spades crimped and double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
Related Products
- Four 14 AWG OFC conductors, doubled to 11 AWG per leg
- Discreet white jacket printed CM/CL2
- Gold-plated Radique Audio banana plugs
- Bi-wire capable to order; hand-assembled in our shop
- 1-year warranty
- Radique Audio banana plugs to small spades (forks) for #10 / M5 posts
- Small spades crimped and double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
- Radique Audio pins for spring clips and guillotine terminals
- Small spades (forks) for #10 / M5 posts, double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
- Hand-assembled in Ottawa
- 2 plugs at the amp, 4 at each speaker
- Braided sleeve, heat-shrink at every split
- Choose 5 or 10 ft
- Brand new
- 1-year warranty
- Gold-plated banana plugs to flexible gold-plated pins
- Dual set screws and colour-coded jackets at both ends
- Colour-matched heat-shrink at every joint
- Any combination of ends on request
- 1-year warranty
- Radique Audio banana plugs, colour-coordinated
- Shrink tubing reinforces both ends and the split
- Choose 3, 5 or 7 ft
- Brand new
- 1-year warranty
- House CCA, House OFC, House Quad, Kimber 4PR or Kimber 4TC
- Banana, spade, pin, small spade or bare wire, chosen for each end
- Bi-wire on Kimber 4PR, Kimber 4TC and House Quad
- Hand-assembled, heat-shrink reinforced and colour-coordinated
- 1-year warranty
- Radique Audio banana plugs at the amplifier, bare wire at the speaker
- Kimber’s woven four-conductor 4PR braid
- From an authorized Canadian Kimber Kable dealer
- Free shipping within Canada
- 1-year warranty
Radique House Quad Speaker Cables, 10 ft Pair – Banana Ends
Twice the copper, out of sight: a 10 ft pair of four-conductor oxygen-free copper speaker cable, banana plugs at both ends.
Radique House CCA Cables, 10 ft Pair – Banana to Small Spade
For vintage posts too small for spades: a 10 ft House CCA pair, banana plugs to small spades.
Radique House CCA Cables, 10 ft Pair – Pin to Small Spade
Vintage to vintage, no bare wire: a 10 ft House CCA pair, pin connectors to small spades.
Kimber 4PR Speaker Cables, 2.4 m (8 ft) Pair — Pin to Banana
A matched 2.4 m (8 ft) pair of Kimber Kable 4PR, hand-terminated in our shop: Radique Audio pins at the amplifier, banana plugs at the speakers.
✔️ New — hand-assembled in Ottawa by an authorized Kimber Kable dealer
✔️ Flexible pins for spring-clip terminals, bananas for binding posts
✔️ Matched pair, 2.4 m (8 ft) per cable
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
Radique 16 AWG Quad Bi-Wire Speaker Cables – Braided, 5 or 10 ft
Bi-wiring, done properly: our 16 AWG OFC bi-wire speaker cables in 5 ft or 10 ft pairs: four conductors per cable under a braided sleeve, Radique Audio banana plugs at both ends.
Radique 16 AWG Quad Bi-Wire Speaker Cables – Grey, 8 ft Pair
A matched pair of bi-wire speaker cables, 8 ft per cable: four colour-coded 16 AWG conductors in a slim grey jacket, terminated with our own gold-plated Radique Audio banana plugs.
✔️ Four 16 AWG conductors per cable, colour-coded
✔️ 2 plugs at the amp, 4 at each speaker
✔️ Heat-shrink at every split, gold-plated Radique Audio banana plugs
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
Radique House CCA Speaker Cables – Banana to Pin, 7 or 25 ft
Banana to pin, 7 or 25 feet: a pair in our red and black House CCA, 7 ft in stock or 25 ft built to order.
Radique House CCA Speaker Cables – Banana Plugs, 3, 5 or 7 ft
Short runs, done properly: a pair of House CCA speaker cables, 3, 5 or 7 ft, banana plugs at both ends.
Custom Speaker Cable Builder
Your specs, your cable: choose the cable, the length and each connector, with live pricing.
Kimber 4PR Speaker Cables, 2 m Pair – Banana to Bare Wire
The cable that converts sceptics: a matched 2 m pair of genuine Kimber Kable 4PR, hand-terminated by us.
